Humax DTT-nano Bruksanvisning

Läs nedan 📖 manual på svenska för Humax DTT-nano (32 sidor) i kategorin Digitala avkodare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/32
The default PIN Code is set to 0000.
User’s Manual
DTT nano
Digital Terrestrial MHP Receiver
GB2
Users Manual
Notice
Negation of responsibility
The information contained in this user’s manual is based on the characteristics of the product at the time
the initial draft was made. Despite eort to provide information on the specic features and functions of
the product, details of the hardware and software are not provided. The features relevant to installation
and maintenance are not described. Functions that are not seen in the hardware and software may appear
in the manual. Humax srl has no obligation of prior notice for additions or changes that may occur in the
future.
The information and features of the product in this user’s manual are subject to change without
prior notice.
Note:
You can download the electronic version of the users manual from the website
www.humaxdigital.com.
Warranty
The warranty does not cover parts which may become defective due to misuse of the information
contained in this manual.
Trademarks
• IrdetoisatrademarkofMindportBV.
• NagravisionisaregisteredtrademarkofKUDELSKIS.A.
• ConaxisatrademarkofTelenorConaxAS.
Warnings, Cautions and Notes
Throughoutthewholemanual,payspecialattentiontothefollowingmarksthatindicatehazardous
situations.
• Warning
 Indicatesahazardoussituationwhichcouldresultinseriousinjury.
• Caution
 Indicatesasituationwhichcoulddamagetheequipmentorotherapparatus.
• Note
 Indicatesadditionalinformationtomaketheuserawareofpossibleproblemsandinformationofany
importance to help understand, use and maintain the installation.
Notice
GB3
Users Manual
Meaning of Symbols
Toreducetheriskofelectricshock,donotremovecover(orback).Nouserserviceable
partsinside.Referservicingtoqualiedservicepersonnel.
Thissymbolindicatesdangerousvoltageinsidetheproductthatpresentsariskof
electricshockorpersonalinjury.
This symbol indicates important instructions accompanying the product.
Customer information
According to art. 13 of the Legislative Decree 25th July 2005, no. 15 „Application of the Directives
2002/95/CE, 2002/96/CE and 2003/108/CE, regarding the reduction of dangerous substances in
electric and electronic products, as well as the waste disposal.
The symbol with the crossed refuse bin, present on the product, indicates that the
product must be collected separately from other refuse after his lifetime is expired.
This means that the customer must hand over the product at the end of the lifetime
toanauthorizedcollectioncenterforelectronicandelectrotechnicalrefuse.Asan
alternative the customer can hand over the product to a dealer when he purchases an
equivalentproduct,accordinglytotheprincipleoneinreturnforone.
Aprofessionaldierentiatedcollectionofnolongerusedproductsforrecycling,utilizationordisposal,
helpstoreducenegativeconsequencesfortheenvironmentandthehealth.Inadditiontheutilizationof
materials composing the product will be supported.
The illegal disposal of the product by the customer results in the application of the administrative nes
accordingtoLegislativeDecreeno.22/1997(article50andfollowingsofLegislativeDecreeno.22/1997).

Produktspecifikationer

Varumärke: Humax
Kategori: Digitala avkodare
Modell: DTT-nano

Behöver du hjälp?

Om du behöver hjälp med Humax DTT-nano ställ en fråga nedan och andra användare kommer att svara dig




Digitala avkodare Humax Manualer

Digitala avkodare Manualer

Nyaste Digitala avkodare Manualer