Ibiza Sound SA500 Bruksanvisning

Ibiza Sound mottagare SA500

Läs nedan 📖 manual på svenska för Ibiza Sound SA500 (13 sidor) i kategorin mottagare. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/13

SA500 SA1000 SA2000– –

INSTRUCTION MANUAL

MANUEL D’UTILISATION

BEDIENUNGSANLEITUNG

H ANDLEIDING

Imported from China by

LOTRONIC S.A.

Avenue Zénobe Gramme 9

B-1480 Saintes

IMPORTANT SAFETY INSTRUCTIONS

1) Read the manual prior to using this unit and keep it for future reference.

2) Adhere to all warnings and instructions marked on the unit and . contained in the manual

3) Don’t place the unit close to water, e.g. in a bathroom, near a wash tub, a swimming pool, etc.

4) The unit must match carriage and rack recommended by the manufacturer.

Sudden stops, great power and rough surface may cause combination turns over.

5) Keep away from heat sources such as radiator, stove and amplifier etc.

6) Operate the unit only with the rated power supply. Please ask your dealer or local power supply

company if you are not sure about your type of power supply. If the unit is operated with batteries or

other power supplies, please refer to this booklet.

7) Do not walk on or squeeze the power cord.

8) Clean this unit with a soft cloth. Prevent water and/or other liquids the housingto enter into .

9) Unplug the power cord if the unit is not used for a long time or during a thunderstorm to prevent

voltage surges to damage the inner circuitry.

10) Prevent objects s and liquid to enter into unit.

11) If one of the following happens, refer to qualified service personnel:

A) Power cord or plug a damaged; or

B) An object or liquid has entered into the unit; or

C) The unit has been exposed to rain ; or

D) do The unit esn’ t work; or

E) The unit has fallen or doesn’t work normally.

12) Repair ---Do not attempt to repair the unit yourself. All repairs must be carried out by a qualified

technician. The user is only allowed to perform manipulations, settings and controls specified in this

manual.

13) Ventilation --- Do not cover the ventilation openings to prevent overheating of the unit. Do not place

the unit on bed, blanket, sofa or similar soft surface. Do not place unit inside a bookcase, a closed

cupboard, etc.

14) Accessories---Not use parts that hare not recommended by the manufacturer in order to avoid

damage.

15) Auxiliary equipment ---Do not place this unit on unstable vehicle, shelf, tripod or table. It will cause

serious harm to child or adult if the unit falls down use the vehicle, shelf, tripod or table. Please

recommended by the manufacturer.

16) Spare parts---If the unit requires sspare part , use only spares recommended by the manufacturer and

that are in all aspects identical to the original parts. .

17) Safety check---After repairing, repairer must test the unit for security.

CONTROLS

1. Power: Press this button to power ON/OFF the unit.

2. L Volume: Use this knob to adjust the volume of left channel of main speaker output

3. R Volume: Use this knob to adjust the volume of right channel of main speaker output.

SA500 & SA1000

1. XLR Line input: Use the XLR connectors to connect to Line signal source to the XLR input of the amplifier.

2. RCA Line input: Use the RCA cables to connect the line signal source to the RCA line input of the amplifier.

3. 1/4” Line input: Use suitable jacks to connect the line signal source to the 1/4” line input of the amplifier.

4. SPEAKON OUTPUT: Connect the speakon outputs to the input of passive speakers.

5. MAIN Speakers output: Connect the main speaker outputs to the input of passive speakers.

Note: If there are four speakers connected to the speakon outputs and main speaker outputs, the impedance

of each speaker must be 8ohms at least to protect the amplifier.

6. Power Cord: Use the power cord provided with the amplifier to connect to the power outlet.

SA2000

1. XLR Line input: Use the XLR connectors to connect to Line signal source to the XLR input of the amplifier.

2. RCA Line input: Use the RCA cables to connect the line signal source to the RCA line input of the amplifier.

3. SPEAKON OUTPUT: Connect the speakon outputs to the input of passive speakers.

4. MAIN Speakers output: Connect the main speaker outputs to the input of passive speakers.

Note: If there are four speakers connected to the speakon outputs and main speaker outputs, the impedance

of each speaker must be 8ohms at least to protect the amplifier.

5. LINK output: Connect the XLR input signal to another amplifier.

6. Power Cord: Use the power cord provided with the amplifier to connect to the power outlet.

Produktspecifikationer

Varumärke:	Ibiza Sound
Kategori:	mottagare
Modell:	SA500

Behöver du hjälp?

Om du behöver hjälp med Ibiza Sound SA500 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

mottagare Ibiza Sound Manualer

Ibiza Sound SA500 Bruksanvisning

6 Augusti 2024

mottagare Manualer

Nyaste mottagare Manualer

Speco Technologies PBM120AT Bruksanvisning

27 Oktober 2024

Fosi Audio V3 Bruksanvisning

26 Oktober 2024

Jensen CAR710-4BC Bruksanvisning

26 Oktober 2024

Onkyo TX-RZ830 Bruksanvisning

24 Oktober 2024

Pioneer VSX-1122K Bruksanvisning

22 Oktober 2024

NAD C 355BEE Bruksanvisning

21 Oktober 2024

Yamaha HTR-5072 Bruksanvisning

21 Oktober 2024

Yamaha RX-A810 Bruksanvisning

20 Oktober 2024

Sherwood R-607 Bruksanvisning

20 Oktober 2024

Denon AVC-S660H Bruksanvisning

19 Oktober 2024