Icom IC-M32 Bruksanvisning

Icom mottagare IC-M32

Läs nedan 📖 manual på svenska för Icom IC-M32 (40 sidor) i kategorin mottagare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/40

INSTRUCTION MANUAL

iM32

VHF MARINE TRANSCEIVER

This device complies with Part 15 of the FCC

Rules. Operation is subject to the condition that

this device does not cause harmful interfer-

ence.

SAFETY TRAINING INFORMATION

Your Icom radio generates RF electromagnetic energy during

transmit mode. This radio is designed for and classified as

“Occupational Use Only”, meaning it must be used only during

the course of employment by individuals aware of the haz-

ards, and the ways to minimize such hazards. This radio is

NOT intended for use by the “General Population” in an un-

controlled environment.

This radio has been evaluated for compliance at the distance of 2.5 cm with

the FCC RF exposure limits for “Occupational Use Only”. In addition, your Icom

radio complies with the following Standards and Guidelines with regard to RF

energy and electromagnetic energy levels and evaluation of such levels for ex-

posure to humans:

• FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance

with FCC Guidelines for Human Exposure to Radio Frequency Electro-

magnetic Fields.

• American National Standards Institute (C95.1-1992), IEEE Standard for

Safety Levels with Respect to Human Exposure to Radio Frequency Elec-

tromagnetic Fields, 3 kHz to 300 GHz.

• American National Standards Institute (C95.3-1992), IEEE Recommended

Practice for the Measurement of Potentially Hazardous Electromagnetic

Fields– RF and Microwave.

• The following accessories are authorized for use with this product. Use of

accessories other than those speciﬁed may result in RF exposure levels

exceeding the FCC requirements for wireless RF exposure.; Belt Clip (MB-

68/74/74N/87), Rechargeable Ni-Cd Battery Pack (BP-224) and Alkaline

Battery Case (BP-223).

To ensure that your expose to RF electromagnetic en-

ergy is within the FCC allowable limits for occupational

use, always adhere to the following guidelines:

CA U TIO N

W AR N IN G

• DO NOT operate the radio without a proper antenna attached, as this may

damaged the radio and may also cause you to exceed FCC RF exposure

limits. A proper antenna is the antenna supplied with this radio by the man-

ufacturer or antenna speciﬁcally authorized by the manufacturer for use

with this radio.

• DO NOT transmit for more than 50% of total radio use time (“50% duty

cycle”). Transmitting more than 50% of the time can cause FCC RF expo-

sure compliance requirements to be exceeded. The radio is transmitting

when the “TX indicator” lights red. You can cause the radio to transmit by

pressing the “PTT” switch.

• ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body

when transmitting and only use the Icom belt-clips which are listed on

page 32 when attaching the radio to your belt, etc., to ensure FCC RF ex-

posure compliance requirements are not exceeded. To provide the recipi-

ents of your transmission the best sound quality, hold the antenna at least

5 cm (2 inches) from your mouth, and slightly off to one side.

The information listed above provides the user with the information needed to

make him or her aware of RF exposure, and what to do to assure that this radio

operates with the FCC RF exposure limits of this radio.

Electromagnetic Interference/Compatibility

During transmissions, your Icom radio generates RF energy that can possibly

cause interference with other devices or systems. To avoid such interference,

turn off the radio in areas where signs are posted to do so. DO NOT operate

the transmitter in areas that are sensitive to electromagnetic radiation such as

hospitals, aircraft, and blasting sites.

Occupational/Controlled Use

The radio transmitter is used in situations in which persons are exposed as

consequence of their employment provided those persons are fully aware of

the potential for exposure and can exercise control over their exposure.

IN CASE OF EMERGENCY

If your vessel requires assistance, contact other vessels and

the Coast Guard by sending a distress call on Channel 16.

❍USING CHANNEL 16

DISTRESS CALL PROCEDURE

1. “MAYDAY MAYDAY MAYDAY.”

2. “THIS IS ...........................” (name of vessel)

3. Your call sign or other indication of the ves-

sel.

4. “LOCATED AT .....................” (your position)

5. The nature of the distress and assistance re-

quired.

6. Any other information which might facilitate

the rescue.

RECOMMENDATION

CLEAN THE TRANSCEIVER THOROUGHLY WITH FRESH

WATER after exposure to saltwater, and dry it before opera-

tion. Otherwise, the transceiver’s keys, switches and con-

trollers may become inoperable due to salt crystallization.

Produktspecifikationer

Varumärke:	Icom
Kategori:	mottagare
Modell:	IC-M32
Färg på produkten:	Zwart
Vikt:	3620 g
Bredd:	437 mm
Djup:	249 mm
Höjd:	43 mm
Nuvarande:	2.6 A
På / Av knapp:	Ja
Processorfamilj:	Intel
Ethernet LAN:	Ja
Antal USB 2.0-portar:	6
VGA (D-Sub) port(ar):	1
Antal Ethernet LAN (RJ-45)-portar:	2
Certifiering:	UL, FCC, cUL, ICES-003, VCCI, CE, CB, C-tick
Nätförsörjning:	200 W
Hållbarhetscertifikat:	RoHS
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Förvaringstemperatur:	-40 - 70 °C
Processoruttag:	BGA 1023
Maximalt internminne:	16 GB
CPU-konfiguration (max):	1
Förvaringsfuktighet:	5 - 95 procent
Bostadstyp:	Rack (1U)
ETC:	Ja
Minnesformfaktor:	240-pin DIMM
Ethernet-gränssnittstyp:	Fast Ethernet, Gigabit Ethernet
Chipset moderkort:	Intel® QM77 Express
PCI Express x16-platser:	1
Gränssnitt för lagringsenheter som stöds:	Serial ATA II, Serial ATA III
Seriell port(ar):	2
Minnesspänning:	1.35, 1.5 V
LAN-kontroller:	Intel 82574L, Realtek RTL8201F
Typer av RAID:	0, 1,5, 10
Minnesbuss:	72 Bit
Antal SATA III-kontakter:	2
Kompatibla processorer:	Intel® Core™ i5
Antal processorer som stöds:	1
Antal DIMM-platser:	2
Stöder DIMM-modulfunktioner:	2GB, 4GB, 8GB
Antal lagringsenheter som stöds:	4
Storlekar för lagringsenheter stöds:	2.5, 3.5 "
Minnestyper som stöds:	DDR3-SDRAM
Hot-swap hårddiskfack:	Nee
AC-ingångsspänning:	100 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Drifttemperatur (TT):	10 - 35 °C
Relativ luftfuktighet i drift (VV):	8 - 90 procent
BIOS-typ:	AMI
BIOS-minnesstorlek:	16 Mbit
ACPI-version:	2.0
Antal SATA II-kontakter:	4
DC-utgångsström (+ 12 V):	16 A
Stöd för Intelligent Platform Management Interface (IPMI).:	Ja
IPMI LAN (RJ-45) port:	Ja
DC-utgångsström (+5 V):	8 A
BIOS-funktioner:	SMBIOS 2.3