Icon Fires SB500 Bruksanvisning
Icon Fires
Härda
SB500
Läs nedan 📖 manual på svenska för Icon Fires SB500 (17 sidor) i kategorin Härda. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/17
Slimline Burner Manual
www.iconfires.com
2
Operating Manual
Thank you for purchasing this Icon Fires product. Icon Fires places the highest priority on safety
of its products. Every care has been taken in designing, manufacturing and assembling your
Icon Fires Burner to ensure it operates effectively, efficiently and safely. Live-fire products must
be treated with care. We ask that you exercise care when using this product and follow the
instructions below. Before using your Icon Fires Burner, please read all the information
contained in this Operation Manual carefully. Icon Fires cannot be held responsible for any
damage or injury caused if these instructions are not followed.
Retain this Manual for future reference.
IMPORTANT SAFEGUARDS
When using this Fireplace, basic precautions should always be followed, including but not
limited to the following. Read all instructions and warnings before using this Fireplace.
WARNING
• DO NOT OVERFILL THE BURNER’S INTENDED CAPACITY.
•
•
•
• USE ONLY THE FUEL FOR WHICH THE SLIMLINE BURNER IS INTENDED.
• DO NOT TOUCH THE EXTERIOR OF THE SLIMLINE BURNER DURING OR AFTER BURNING.
• PARTS OF THIS SLIMLINE BURNER CAN REACH HIGH TEMPERATURES.
• DO NOT HAVE COMBUSTIBLE OBJECTS IN CLOSE PROXIMITY TO THE BURNER.
• UNLESS THE BURNER IS OUTDOORS, DO NOT INSTALL INTO AN AREA WHERE THERE IS A DRAFT
WHICH CAN AFFECT THE FLAME.
ESPECIALLY WHEN INSTALLING IN OLD HEARTHS, MAKE SURE HEARTH IS SEALED.
• NEVER POSITION THE BURNER WITHIN RANGE OF COMBUSTIBLE ITEMS THAT CAN BE
MOVED/BUMPED BY ACCIDENT OR BLOWN BY THE WIND. E.G. CURTAINS, BLANKETS, PAPERS
ETC...
• ONLY USE THE SLIMLINE BURNER IN AREAS WITH GOOD VENTILATION.
• DO NOT COVER THE SLIMLINE BURNER VENT WITH ANY DECORATIVE ITEMS WHETHER THEY ARE
COMBUSTIBLE OR NON-COMBUSTIBLE, INCLUDING BUT NOT LIMITED TO ARTIFICIAL LOGS,
STONES, PEBBLES, GLASS BEADS etc.
• CUSTOMS INSTALLATION: ICON FIRES IS NOT LIABLE FOR ANY INJURIES OR DAMAGES
SUSTAINED BY CUSTOM MADE OR PRIVATELY COMISSIONED FIREBOXES. ICON FIRES
RECOMMENDS USING THE BURNERS IN THE FIREBOXES MANUFACTURED BY ICON FIRES ONLY.
ANY ALTERATIONS TO THE ICON PRODUCT VOIDS ANY WARRANTY OR LIABILITY.
• WARNING: FILLING AND ALCOHOL FUELLED DEVICE WHILE LIT HAS CAUSED SEVERE BURNS
AND DEATHS. WHEN REFILLING FIRST CHECK THE FLAME IS EXTINGUESHED AND THAT THE
DEVICE IS COOL.
CAUTION
• Make sure you have read and understood this manual before using this product.
• Do not overfill or spill fuel when refilling.
• If fuel is spilt onto the surface of the Firebox WIPE IT IMMEDIATELY AND LEAVE TO DRY BEFORE
LIGHTING THE BURNER.
• If fuel is spilled on the stainless steel Burner during filling, wipe with a dry cloth and allow the rest to
evaporate before lighting the Burner.
• If the Burner is accidentally overfilled, follow the steps in the Burner manual to rectify.
• To refill, wait until the Burner is at the room temperature after the flame has been turned off.
3
NOTE: the flame may not be visible to the naked eye in daylight and must be cool before filling.
• NEVER refill over or near an open flame and use a decanter with a flame arrestor only.
• Remove all plastic & packaging before using the Burner.
Trouble shooting and operating tips:
• The hooks on the back of the Sliding Lid Handle can be used to carry the Slimline Burner
by hooking it around the slotted openings in the Vent Plate as shown in the image
below. Not Applicable to Round Burner.
• The first fill will take longer and more fuel as the material inside the Fuel Tank will absorb
the fuel. Subsequent filling should be quicker with less fuel. Take care to not fill the burner
at a faster rate than what the material inside can absorb.
• If the fire does not extinguish the first time by closing the Sliding Lid follow these steps and
repeat if necessary.
o Check that the surface below the sliding plate is clean and free from
obstruction.
o Apply strong downward force and in one quick motion move the sliding plate
towards the closed position. If the flame is still visible repeat this step as a
double motion still applying strong downward force in quick succession.
• Never blow on the flame whilst the Sliding Lid is in an open position.
• If your Slimline Burner does not ignite after it has been closed overnight pour a small
amount of fuel across the length of the Burner Vent with the supplied plastic bottle and
introduce the flame. This should then ignite the stagnant fuel inside the Fuel Tank. For
Round Burner simply add fuel to the tank and ignite.
• VERY IMPORTANT: Take special care when adding fuel to the Slimline Burner, always
close the Sliding Lid for a few minutes before adding fuel to make sure there is no visible
flame in the Burner Vent.
• If after some time you find the Sliding Lid has become ‘sticky’ when attempting to move
it then remove the Sliding Lid from its housing and rub the underside using the green side
of a Scotch Bright scouring pad. Take care to only scrub in the direction of the brushing
lines of the stainless steel. Not applicable to Round Burner.
• Make sure you keep your Burner clean especially the surface that the Sliding Lid slides on
and ensure that any excess fuel on the surface of the Burner is wiped off before use.
Produktspecifikationer
Varumärke: | Icon Fires |
Kategori: | Härda |
Modell: | SB500 |
Behöver du hjälp?
Om du behöver hjälp med Icon Fires SB500 ställ en fråga nedan och andra användare kommer att svara dig
Härda Icon Fires Manualer
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
Härda Manualer
- Härda Altech
- Härda Toolland
- Härda OneConcept
- Härda Landmann
- Härda Dimplex
- Härda Well Straler
- Härda Dovre
- Härda Napoleon
- Härda Faber
- Härda Blumfeldt
- Härda Manor House
- Härda Edilkamin
- Härda Hwam
- Härda Bellfires
- Härda Xaralyn
- Härda Livin Flame
- Härda Spartherm
- Härda Brula
- Härda Stuv
- Härda Haas-Sohn
- Härda Austroflamm
- Härda Thermorossi
- Härda Saey
- Härda M-design
- Härda Element4
- Härda Norsk Kleber
- Härda Blackline
- Härda Kago
- Härda JAcobus
- Härda Italiana Camini
- Härda Brunner
- Härda DRU
- Härda Ruby Fires
- Härda Hergom
- Härda Global Fires
- Härda Mondena
- Härda Godin
- Härda Kalfire
- Härda Barbas
- Härda Big Fire
- Härda Thermocet
- Härda Jydepejsen
Nyaste Härda Manualer
18 Oktober 2024
5 Oktober 2024
26 September 2024
23 September 2024
22 September 2024
21 September 2024
20 September 2024
17 September 2024
16 September 2024
16 September 2024