Iconbit FTB5200U Bruksanvisning

Iconbit powerbank FTB5200U

Läs nedan 📖 manual på svenska för Iconbit FTB5200U (1 sidor) i kategorin powerbank. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
Keep your power bank operating to the fullest potential, by
following the below steps:
1. Re-charge your power bank once every three months
when it is not in use.
2. Keep the power bank away from any moist environment
and corrosive material.
3. Never wash the power bank with any chemicals, soaps
or detergents.
1. Simply using the attached USB cable to charge the digital
product, One end of the USB cable connect with the "OUT"
port of the power bank, another end connect with the
digital product with converted tip. Press "ON" button once,
it will start to charge and the green LED will indicate the
charging process.
2. Finishing charging or fail to connect the digital product,
the green LED will stop ashing. And the power bank
will turn o automatically after 30 seconds.
3. When on charging process, the green LED ashes quickly
means low power and need to charge the power bank
in time.
Note: If the instantaneous current is oversize when charging
the digital product, the power bank will turn to protected
mode automatically. To relieve the protected mode just
charge the power bank.
The "IN" port is the charging port of the power bank. The
red LED will light on when charge the power bank, after
full charging, the red LED will light o.
1. Turn ON button
2. USB output port
3. DC5V input port

Produktspecifikationer

Varumärke: Iconbit
Kategori: powerbank
Modell: FTB5200U

Behöver du hjälp?

Om du behöver hjälp med Iconbit FTB5200U ställ en fråga nedan och andra användare kommer att svara dig




powerbank Iconbit Manualer

powerbank Manualer

Nyaste powerbank Manualer