Ikan PT4700 Bruksanvisning

Läs nedan 📖 manual på svenska för Ikan PT4700 (6 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/6
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re toofilmmakers
PT4500-SDI / PT4700-SDI
Quick Start Guide
High Bright Beam Splitter Teleprompter w/ 3G-SDI, HDMI, & VGA
Whats Included
1 x Teleprompter Base
1 x Bracket with Glass
1 x Teleprompter Hood with Boot
1 x Monitor
1 x AC Adapter with Cord
1 x PrompterPro Software
1 x Counterweight Set (2 x 2.5 lbs)
2 x D-Ring ¼-20” Screws
2 x Hex Keys
3 x Different Height Risers
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re toofilmmakers
1
2
-
2
4
V
H
D
M
I
V
G
A
Assembly Steps
Step 1
Remove the monitor mounts from the teleprompter base using the included larger 4mm hex key to loosen from the 15mm rods.
Step 2
Attach the monitor mounts on the back of the monitor’s VESA compatible threads using the 4 included screws and provided 2mm hex key.
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re toofilmmakers
Step 3
After the monitor mounts are attached, adjust the 15mm rods to accommodate the monitor. Leave about 1 inch of room for the teleprompter bracket.
Make sure the 15mm rods go through both set of monitor mounts. Please ensure that all screws are properly tightened after inserting the monitor.
*SAFETY NOTE* Make sure to leave at least 2 inches of the rods inside the teleprompter base.
Step 4
While sliding the teleprompter bracket into the slot of the teleprompter base pull on the red knob to allow the bracket to fully slide in.
Teleprompter Base

Produktspecifikationer

Varumärke: Ikan
Kategori: Inte kategoriserad
Modell: PT4700

Behöver du hjälp?

Om du behöver hjälp med Ikan PT4700 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Ikan Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer