ILive IAHP86B Bruksanvisning

ILive Headset IAHP86B

Läs nedan 📖 manual på svenska för ILive IAHP86B (2 sidor) i kategorin Headset. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

FCC WARNINGS

Warning: Changes or modications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

ADDITIONAL WARNINGS AND PRECAUTIONS

• To avoid hearing damage, make sure that the volume on your music player is turned down before

connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume

until you reach a comfortable listening level.

• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed

of according to state and local guidelines. They should never be disposed of in normal household

waste, and they should never be incinerated, as they might explode. Contact your local government for

disposal or recycling practices in your area.

• WARNING: This product may contain chemicals known to the State of California to cause birth defects,

or other reproductive harm (California Prop 65). Wash hands after handling.

• This product meets and complies with all Federal regulations.

Orientation

Wireless Noise Canceling Headphones

User’s Guide for Model IAHP86B v1547-01

Includes

• Micro-USB to USB charging cable

• 3.5mm audio cable

• Hard carrying case

Features

• Supports Bluetooth

• Wireless range: 33 feet

• Built-in microphone

• Micro-USB port for battery recharge

• Aux in (3.5mm audio input)

• Folding adjustable headband

• On-ear controls

• DC battery power: built-in

rechargeable lithium ion battery

• Battery life: approx. 8 hours

Noise Canceling

Indicator Light

Noise Canceling

ON/OFF

RIGHT EARCUP CONTROLS

Power/Pair/Play/Pause/Speakerphone

Press and hold for to turn the unit on and begin pairing.4 sec.

Press and hold to turn OFF.

Volume +/-

Press to adjust volume level.

Aux In

Bluetooth

LED Indicator

Mic

Micro-USB

Charging Port

LEFT EARCUP CONTROLS

To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit

the support section at: www.iLiveElectronics.com

Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas

frecuentes, visite la sección de apoyo en: www.iLiveElectronics.com

Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des

questions fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com

For Warranty Information and the most up-to-date version of this User’s Guide, go to www.iLiveElectronics.com

Customer Service: | Email Support: | Email Parts: 1-888-999-4215 prodinfo@dpiinc.com partsinfo@dpiinc.com

of their respective owners. Specications are subject to change without notice.

International Support

Protect for Today

Sustain for Tomorrow

Made

Green

Charging the Battery

Requires a Micro-USB to USB cable (included).

1. Using a Micro-USB to USB cable (included), connect the larger USB plug

to the of a powered on computer or USB power adaptor (not USB port

included).

2. Connect the smaller into the on the unit. Micro-USB plug Micro-USB port

The unit will now charge.

Aux In

Aux In mode will function even if the headphones are not powered ON.

To conserve battery power, keep them powered OFF when using Aux In.

Requires a 3.5mm audio cable (included).

1. Connect a 3.5mm audio cable to the on the unit and the Aux In

audio output on an audio device.

2. Use the controls on the connected device to select and play audio.

Noise Canceling

The Noise Canceling feature will electronically mute background noise. It can be

used with the Bluetooth or Aux In modes to enhance the quality of any music or

audio that is playing through the headphones.

Noise Canceling mode will function even if the headphones are not powered ON.

To conserve battery power, it is recommended to power the headphones OFF if

you want to use the Noise Canceling feature without playing audio.

Bluetooth Wireless Audio

Pairing to a Device and Playing Audio

After initial pairing, the unit will stay paired unless unpaired manually by the user,

or erased due to a reset of the device. If your device should become unpaired or

you nd it is unable to connect, repeat the steps listed here.

1. Press and hold the Power/Pair button on the unit for approximately

4 seconds to power the unit on and begin pairing. The pairing indicator

will begin ashing red and blue.

When pairing, remain within 3 feet of the unit.

2. Using the controls on your Bluetooth device, select the in your IAHP86

Bluetooth settings/device menu. If your device requests a password, enter

the default password 0 0 0 0 .

Refer to the user’s manual for your specic device for instructions on pairing

and connecting Bluetooth devices.

3. When successfully paired, the will turn solid blue and pairing indicator

an audible chime will sound through the unit. Audio played through the

connected Bluetooth device will now be heard through the headphones.

4. Use the controls on the connected device to select and begin playing audio.

5. To play or pause audio, use the controls on the connected Bluetooth device,

or press the Play/Pause button on the headphones.

Using the Speakerphone

1. When a call is received, a ringtone will sound through the unit.

2. Press the button to accept the call, or accept the call using the

controls on the connected phone.

3. The incoming call received through the device will now be heard through

the headphones.

4. To end the call, press the button or end the call using the controls on

the connected device.

STATUS INDICATOR

Power On Flashing blue light

Charging Solid red light

Charging Complete No light

Pairing Flashing red and blue lights

Pairing Complete Solid blue light

Produktspecifikationer

Varumärke:	ILive
Kategori:	Headset
Modell:	IAHP86B
Färg på produkten:	Wit
Inbyggd display:	Nee
Vikt:	63 g
Bredd:	71 mm
Djup:	42 mm
Höjd:	40 mm
Förpackningens vikt:	1100 g
Strömförsörjning:	15V, 4A
LED-indikatorer:	Ja
Fjärrkontroll:	IR
Anslutningsteknik:	Bedraad
Certifiering:	WEEE, CE/EMC, C-TICK, FCC
Avsedd för:	Thuis
Hållbarhetscertifikat:	RoHS
Ljudutgångskanaler:	2.0 kanalen
Frekvensomfång:	80 - 22000 Hz
Signal-brusförhållande:	98 dB
Total harmonisk distorsion (THD):	1 procent
Fjärrkontroll ingår:	Ja
AC-ingångsspänning:	100-240 V
AC-ingångsfrekvens:	50 - 60 Hz
Strömförbrukning (typiskt):	50 W
Ingångskänslighet:	500 mV
Toppeffekt per kanal:	- W
Synkronisering av ingångsimpedans:	50000 Ohm
Förstärkarklass:	D
RMS uteffekt per kanal (8 Ohm):	25 W
Utgångsimpedans:	8 Ohm