Intellinet 507349 Bruksanvisning

Läs nedan 📖 manual på svenska för Intellinet 507349 (16 sidor) i kategorin Audio/video-omvandlare. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
GIGABIT ETHERNET
MEDIA CONVERTER
INSTRUCTIONS
MODELS 506533, 507349
INT-506533/507349-UM-ML1-1015-02
Important: Read before use. Importante: Leer antes de usar.
intellinetnetwork.com
2
ENGLISH
Gigabit Ethernet Media Converter English
Thank you for purchasing the Intellinet Gigabit Ethernet Media
Converter. Media converters connect two Ethernet networks over
a longer distance using fiber optic cable.
MODELS
• 506533:
Gigabit Ethernet Media Converter
1000Base-T to 1000Base-SX (SC) Multi-Mode, 550 m (1800 ft.)
•507349:
Gigabit Ethernet Single Mode Media Converter
10/100/1000Base-T to 1000Base-LX (SC) Single-Mode, 20 km
(12.4 mi)
CONNECTIONS
TwistedPair–RJ45
Connect the UTP port of the media converter to an RJ45 port on
the network; e.g., to an Ethernet switch. Cat5e or better cabling is
recommended.
Fiber Optic
As shown above, two fiber optic cables need to be connected
between two ideally identical media converters. Make a
connection from Media Converter 1 TX to Media Converter 2 RX,
and from Media Converter 1 RX to Media Converter 2 TX.
Media Converter 1
Media Converter 2
RJ45
RJ45
TX
TX RX
RX
OPTICAL FIBER
ETHERNET 1 ETHERNET 2
Twisted Pair
Twisted Pair
ENGLISH 3
Maximum length and fiber cable specification depend on the
model. (See Models.)
POWER
Plug the power adapter into the 5 V DC input jack on the media
converter, then connect it to a regular power outlet. Only use
the included power adapter or one with matching specifications
(output of 5 V DC, at least 1 A).
LEDS
PWR The power adapter is connected when lit.
1000M – 1000 Mbps link on the twisted pair connection when lit.
Link/Act(TP=RJ45;FP=Fiber) – Active link when lit; data traffic
when flashing; no active network link when unlit.
FDX/COL(forTP/RJ45) – Full duplex connection when lit; data
collisions when flashing; half duplex when unlit.
SD(forFP/Fiber) – Fiber optic signal is detected when lit; no
signal when unlit.
For specifications, go to intellinetnetwork.com.

Produktspecifikationer

Varumärke: Intellinet
Kategori: Audio/video-omvandlare
Modell: 507349

Behöver du hjälp?

Om du behöver hjälp med Intellinet 507349 ställ en fråga nedan och andra användare kommer att svara dig




Audio/video-omvandlare Intellinet Manualer

Audio/video-omvandlare Manualer

Nyaste Audio/video-omvandlare Manualer