Intellinet 508322 Bruksanvisning

Läs nedan 📖 manual på svenska för Intellinet 508322 (16 sidor) i kategorin Audio/video-omvandlare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
Fast Ethernet
Industrial
Media
Converter
Instructions
Model 508322 (IMCI-SMSCF20KM)
or go to: register.intellinet-network.com/r/508322
Scan to
register your
product warranty
Important: Read before use. • Importante: Leer antes de usar.
For additional benets:
Media converters connect two Ethernet networks over a longer distance using fiber optic cable.
For specifications, visit . Register your product at intellinetnetwork.com
register.intellinet-network.com/r/508322 or scan the QR code on the cover.
Features
One 10/100 RJ45 port supporting a maximum distance of 100 m (300 ft.)
One 100Base-FX fiber SC single-mode port supporting a maximum distance of 20 km (12.4 mi.)
IP40 slim-type metal housing to withstand harsh industrial conditions
Option for DIN-rail installation
Two redundant DC inputs (12 - 58 V) with I/O terminal block
Twisted Pair – RJ45
Connect the UTP port of the media converter to an
RJ45 port on the network (e.g., to an Ethernet switch).
Cat5e or better cabling is recommended.
Fiber Optic
As shown, two fiber optic cables need to be connected
between two ideally identical media converters.
Make a connection from Media Converter 1 TX Media Converter 2 RX Media Converter 1 RX to , and from to
Media Converter 2 TX. Maximum length and fiber cable specification depend on the model. (See Models.)
Connections Example
MEDIA VERTECON R 1
MEDIA CONVERT ER 2
RJ45
RJ45
TX
TX RX
RX
OPTICAL FIBER
ET ETHERN 1 E 2TH ERNET
TWISTED PAIR
T PWISTED AIR
Front panel
Item LED Color Status Description
RJ45 Port
Port activity Green
Flashing Sending or receiving data.
On Port is connected.
Off Port is not connected.
Speed Yellow
On 100 Mbps speed.
Off 10 Mbps speed.
P — Power
Power and power-
supply-under-voltage
alarm (priority of
under-voltage alarm is
higher than power LED)
Green
Flashing
every 1s
Equipment power supply is lower than the lower limit of the
input range of DC 12 V, indicating an under-voltage alarm.
On Power channel is powered.
Off Power channel is not powered.
O — Optical Fiber Port
Fiber port and power
supply overvoltage alarm
(priority for overvoltage
alarm is higher than fiber
port Link/Act LED)
Green
Flashing
every 0.5s
The power supply of the device exceeds the upper limit of the
input range of DC 58 V, indicating an overvoltage alarm.
On Fiber port is connected.
Off Fiber port is not connected.
Flashing Sending or receiving data.
A — Alarm Device alarm and data
transmission indicator Red
Flashing Console/RS232/RS485 port is sending data (LED
flashes to the rhythm of data being sent).
On An issue has been detected (temperature, dying gasp, etc.).
Off No alarm issue detected.
N — NMC Management indicator
and data receiving Green
Flashing Console/RS232/RS485 port is receiving data (LED
flashes to the rhythm of data being received).
On Module embedded and initialization is complete.
Off No embedded module.
2
Instructions Fast Ethernet Industrial Media Converter
English
A—Grounding
ATTENTION: When installing unit, connect the chassis ground first; when uninstalling unit, disconnect chassis ground last.
Wire the grounding terminal to an earth-grounding object to prevent power spikes.
B—Terminal Block Installation
NOTE: Ensure all power is off/disconnected before beginning!
1 Loosen appropriate screws. Insert bare power-supply wires into appropriate terminal
slots (positive wire into positive slot; negative wire into negative slot).
2 Tighten appropriate screws to secure wires.
3 Install block into the device and tighten screws.
C—DIP Switch
Desktop Installation
Prior to use, place/position the device:
on a level surface with at least 25 mm (approx. 1”) of clearance for ventilation;
away from sources of electrical noise: radios,
transmitters, broadband amplifiers;
within 100 m (approx. 328’) of network
devices it’s to be connected to.
DIN-Rail Installation
1 Angle spring of mounting clip
over top lip of DIN rail.
2 Push device down till clip clicks onto rail.
3 Ensure installation is stable.
Side Panel
A B C
PWR1/PWR2 INPU DC10 58VT: V-
P2+P1 2-P1+
PW 1 PWR2
3
+
+
-
-
1 2
Switch Position Description
1 — C/D
Console/Data selector
On Enable remote PD reset function.
Off Turn off remote PD reset function.
2 — LGY
Legacy
On Supports standard and non-standard PD power supply.
Off Only supplies power to standard PD; non-standard PD power supplies not supported.
3 — VLAN
Unused
4 — RST
Manual Reset
On Reset the remote PD device after 24 hours.
Off Release reset.
Placement
35 mm
1
2
3
3
InstructionsFast Ethernet Industrial Media Converter
English

Produktspecifikationer

Varumärke: Intellinet
Kategori: Audio/video-omvandlare
Modell: 508322

Behöver du hjälp?

Om du behöver hjälp med Intellinet 508322 ställ en fråga nedan och andra användare kommer att svara dig




Audio/video-omvandlare Intellinet Manualer

Audio/video-omvandlare Manualer

Nyaste Audio/video-omvandlare Manualer