Ion Vinyl Transport Bruksanvisning

Ion hi-fi system Vinyl Transport

Läs nedan 📖 manual på svenska för Ion Vinyl Transport (20 sidor) i kategorin hi-fi system. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/20

Quickstart Guide English ( 2 – 4 )

Guía de inicio rápido Español ( 5 – 7 )

Guide d'utilisation rapide Français ( 8 – 10 )

Guida rapida Italiano ( 11 – 13 )

Schnellstart-Anleitung Deutsch ( 14 – 16 )

Snelstartgids Nederlands ( 17 – 19 )

Vinyl Transport™

Quickstart Guide (English)

Introduction

Box Contents

Make sure that the items listed below are included in the box:

• Vinyl Transport™

• Felt Slipmat

• Power Adapter

• 45 RPM Adapter

• Quickstart Guide

• Safety & Warranty Manual

Support

For the latest information about this product (system requirements, compatibility information, etc.) and

product registration, visit ionaudio.com.

Connection Diagram

Items not listed under the Box Contents are sold separately.

Speakers

Power

OFF

STOP

AUT O

Features

1. Platter – Place your record here.

2. 45 RPM Adapter Holder – Holds the

included 45 RPM adapter. When not using

the adapter, please place it in this holder.

3. Tonearm – The fixed tonearm can be raised

and lowered by hand, or by pressing the

raise / lower lever.

4. Arm Clip – This specially designed arm clip

secures the tonearm while at rest or when

not in use. The arm clip has been designed

to remain in the up position while unlocked.

5. Raise / Lower Lever – Raises and lowers

the tonearm.

6. 33 / 45 / 78 Switch – This switch controls

the RPM of the turntable platter.

Note: For best results when playing 78 RPM vinyl

records, use a 78 stylus (sold separately). Only use a 78

stylus with 78 RPM vinyl records. Purchase the iCT06rs

78 stylus at ionaudio.com/ict06rs.

7. Autostop switch – This switch turns autostop on or off.

When autostop is on, the platter will start spinning

when the tonearm is placed over the record and stop

spinning when the record has reached the end. (When

autostop is off, the platter will always spin regardless of

the position of the tonearm.)

Note: If your vinyl record stops before it reaches the

end of the music, turn Autostop to the off position for

this particular record. This is generally recommended

for 45 RPM records.

8. Volume/Power Knob – To power on Vinyl

Transport, turn this knob clockwise until it clicks.

When powered on, use this knob to adjust the

volume. To turn off Vinyl Transport, turn this knob

counterclockwise until it clicks.

9. Power Indicator – This LED illuminates when the

power is on.

10. Speaker – The record's audio will be played

through this built-in speaker.

11. RCA Output* – The audio from a playing vinyl record is sent to this line-level coaxial audio output. This

must not be connected to phono level devices.

12. Power Cable Input – Use the included adapter to connect to wall power.

IMPORTANT: Remove the plastic cartridge

cover (needle cover) before operating the

turntable.

*WARNING: The RCA outputs are LINE

level. Please only connect these to LINE

level inputs. You may damage your receiver

if you plug in a LINE level device into a

PHONO level input.

MAXMIN

POWER

ON / OFF

OFF

STOP

AUTO

2 3

1010

DC 5V 1A

OUT

R L

IMPORTANT: Place the included felt slipmat

on the platter; then place your record on the

felt slipmat to carefully hold your records.

Produktspecifikationer

Varumärke:	Ion
Kategori:	hi-fi system
Modell:	Vinyl Transport
Färg på produkten:	Aluminium
Användarmanual:	Ja
Anslutningsteknik:	Bedraad
Genomsnittlig effekt:	300 W
Equalizerinställningar:	Ja
Uteffekt:	4 x 55W
Impedans:	22000 Ohm
Ljudutgångskanaler:	4.0 kanalen
Linjeingång:	Ja
Signal-brusförhållande:	85 dB
Mått (B x D x H):	375 x 205 x 52 mm
Total harmonisk distorsion (THD):	0.05 procent
Maximal ingångsnivå:	4 V
Bi-amping:	Ja