JBL Cinema SB350 Bruksanvisning

JBL Soundbar Cinema SB350

Läs nedan 📖 manual på svenska för JBL Cinema SB350 (6 sidor) i kategorin Soundbar. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/6
JBL CINEMA
SB350
Home Cinema 2.1 soundbar with wireless subwoofer
OwNErS MANuAL
4
JBL CINEMA SB350
TABLE OF CONTENTS
INTRODUCTION 5
ITEMS INCLUDED 5
JBL CINEMA SB350 TOP PANEL CONTROLS 6
JBL CINEMA SB350 SOUNDBAR REAR PANEL CONTROLS AND CONNECTIONS 6
JBL CINEMA SB350 SUBWOOFER CONTROLS AND CONNECTIONS 7
REMOTE CONTROL FUNCTIONS 7
PLACING THE JBL CINEMA SB350 8
OPERATION 9
TURNING THE JBL CINEMA SB350 ON AND OFF 9
OPERATING THROUGH BLUETOOTH
® 9
ADJUSTING THE SYSTEM VOLUME 10
SURROUND MODE BUTTON 10
PROGRAMMING JBL CINEMA SB350 TO RESPOND TO YOUR TV REMOTE 10
TROUBLESHOOTING 11
SPECIFICATIONS 12
6
JBL CINEMA SB350 SOUNDBAR
REAR PANEL CONTROLS AND
CONNECTIONS
(Software
update only)
HDMI TV
(ARC)
Aux-in OpticalPower
Input AC Remove Caps
Power Switch: The power switch turns the JBL CINEMA SB350
ON/OFF. This switch must be turned on before you can operate the system.
Once this switch is turned on, the system will enter Standby mode
(the top-panel power indicator will be amber).
Power Input AC: Connect the supplied AC power cable to
this input.
HDMI TV (ARC): Connect your television to this input using the
supplied HDMI® cable only if your television HDMI input supports Audio
Return Channel (ARC) feature, the audio signal from the television will
be automatically sent back to the soundbar with this single cable. If your
television does not support ARC, you need to use the optical or analog
connections based on your television’s compatibility. Please refer to your
television user guide to confirm HDMI ARC support.
Pairing Button and LED: Press the Pairing button to
initiate wireless pairing between the soundbar and the wireless subwoofer.
See Pairing the Units for Wireless Operation, on page 9 for more information.
EQ Switch: Use this switch to adjust the soundbar’s bass for either
wall or table mounting.
Aux input (Analog Audio in): You can connect an
analog audio device to the CINEMA SB350 by using the supplied 3.5 mm
to RCA cable.
Optical (Digital Audio in): If your TV, disc player or
cable/satellite tuner has an optical digital output, use the included optical
cable to connect it here. Once a Dolby Digital audio stream is sensed by the
soundbar, its Dolby Digital decoding becomes active.
USB Port: For software update only.
JBL CINEMA SB350 TOP PANEL
CONTROLS
1 2 4 53
Optical audio in
Aux-in Analog
HDMI TV (ARC)
LED
Color
Power Button: The Power button toggles the JBL CINEMA SB350
between ON and Standby. When the JBL CINEMA SB350 is in Standby mode
(the button LED indicator is amber), press this button to turn the system
ON (the button LED indicator turns white). The subwoofer will remain on for
approximately ten minutes after the soundbar goes into Standby mode. If the
system is in MUTE mode, the power indicator will also blink white.
NOTE: The JBL CINEMA SB350 and wireless subwoofer
will switch into standby mode after 10 minutes of inactivity.
Auto turn-on: The JBL CINEMA SB350 has a signal detector that
automatically turns the unit ON when it senses an audio signal on the HDMI
®
input or paired Bluetooth source (when using HDMI, TV must support HDMI
ARC). The auto turn-on mode gets activated for analog or optical inputs only
when the JBL CINEMA SB350 detects an audio signal on the input it was on
before going into automatic Standby mode.
NOTE: If the JBL CINEMA SB350 is put in standby using
the power button, this will deactivate the auto turn-on
feature on the analog and optical inputs.
Source Button: The Source can be changed by pressing the
Source Selection Button. Cycle through options to select your preferred Source
in this order: AUX > OPTICAL > HDMI ARC > AUX.
Volume Up/Down Buttons: Press the ( – ) button to
reduce the volume, press the ( + ) button to increase the volume.
NOTE: Pressing both Volume buttons at the same time will
mute the system. Pressing either Volume buttons while the
system is muted will restore the sound.
Surround Mode Button: The surround mode button
turns Harman Display Surround processing ON and OFF. The surround mode
indicator turns amber when Harman Display Surround is active and turns
white when Harman Display Surround is not active (normal stereo sound –
see page 10 for more details).
Bluetooth® (BT): The Bluetooth button is used to set the JBL
CINEMA SB350 into Bluetooth mode. You can pair the system with Bluetooth-
enabled devices using this button (see page 9).
NOTE: JBL CINEMA SB350’s Bluetooth device name is
CINEMA SB350.
1) Power switch
2) Power input AC
3) HDMI ARC TV
4) Subwoofer wireless pairing button and LED indicator
5) Wall / Table EQ
6) Analog Audio in
7) Optical Audio in
8) USB port
USB
32 5
7
6
8
1
4
1) Power on / Standby
2) Source selection
3) Volume +/-
4) Surround mode
5) Bluetooth source /
Pairing

Produktspecifikationer

Varumärke: JBL
Kategori: Soundbar
Modell: Cinema SB350

Behöver du hjälp?

Om du behöver hjälp med JBL Cinema SB350 ställ en fråga nedan och andra användare kommer att svara dig




Soundbar JBL Manualer

Soundbar Manualer

Nyaste Soundbar Manualer