JBL MTC-2P Bruksanvisning

JBL högtalarstöd MTC-2P

Läs nedan 📖 manual på svenska för JBL MTC-2P (1 sidor) i kategorin högtalarstöd. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

8500 Balboa Boulevard

Northridge, CA 91329 USA

Visit us online at www.jblpro.com

A. Screw the metal rod/ball assembly ( ) into the threaded insert ( ) on the 1 2

back of the cabinet ( ) until it is seated against the bottom of the insert.8

B. Next, tighten the “knurled” nut ( ) with a small wrench 3

( ) until it is seated against the back of the cabinet. Tighten the nut 9

until it has “locked” the rod/ball assembly ( ) to the cabinet. Note: the 1

nut may leave marks on the back of the cabinet where the attachment

is made however, the flange of the nut will cover these marks.

C: Mount the wall bracket plate ( ) onto a flat sturdy surface using the 4

appropriate mounting hardware for the surface. A safety cable ( ) 5

(not included) may be attached to the wall bracket via its eyelet ( ) at one of the 6

two lower screw mounting points or to a secondary point off the mounting plate.

D. Next, slip the large molded nut ( ) over the ball on the metal rod/ball assembly ( ). 7 1

E. Holding the cabinet ( ) with both hands, insert the ball on the metal rod/ball assembly ( ) into the cup of the wall plate ( ).8 1 4

F. Orient the speaker into the desired position and hand tighten the molded nut ( ). Once the orientation is finalized, 7

use the metal bar ( ) in one of the holes on the molded nut ( ) to securely tighten.9 7

NOTE: Over tightening can damage the nut. Tighten using the supplied bar and hand-force only. Use of additional tools

such as pliers to tighten the nut will void the warranty.

G. Clip the safety cable to the cabinet's safety bar ( ) on the back of the cabinet.10

H. Mount the power supply holder onto a flat sturdy surface using the appropriate

mounting hardware for the surface. The holder should be oriented horizontally

or vertically with the spring clip ( ) on top. Choose a location in11

proximity to a power out let so the power cable will reach the outlet.

I. Insert the power supply as far as it will go into the holder until

the retaining clip ( ) prevents removal of the power supply. 11

J. Connect the power cable to the power outlet.

* :NOTE When MTC-2P Brackets are installed in mobile vehicles, vibration and sudden movement may cause a shift in position, requiring re-adjustment.

* : CAUTION Unsafe mounting or overhead suspension can result in serious injury and equipment damage. Mounting of speakers should be done by qualified personsin accordance with all applicable local safety and

construction standards. Be certain to follow the instructions provided by the manufacturer of the mounting bracket. Before selecting a mounting bracket, be certain it is capable of supporting the weight of the speaker.

MTC-2P Mounting Brackets

for use with

CONTROL 2P

Compact Powered Reference Monitors

MTC-2P Mounting Brackets included in the MTC-2P Mounting Kit are designed to allow safe mounting of Control 2P Compact

Powered Reference Monitors and the outboard power supply to a suitable mounting surface.

The MTC-2P Mounting Kit contains the following items:

2 MOUNTING BRACKET ASSEMBLIES

1 POWER SUPPLY HOLDER

1 WRENCH

(Safety Cable not included)

To mount a Control 2P speaker and the power supply follow these instructions:

JBL Professional Contact Information Mailing Address:

JBL Professional 8500 Balboa Blvd. Northridge, CA 91329

Shipping Address:

JBL Professional 8370 Balboa Blvd., Dock D Northridge, CA 91329

Customer Service:

Monday through Friday | 8:00am - 5:00pm

Pacific Coast Time in the USA

(800) 8JBLPRO (800.852.5776)

www.jblproservice.com

On the World Wide Web:

www.jblpro.com

Outside the USA: Contact the JBL Professional Distributor in your area. A complete list of

JBL Professional international distributors is provided at our U.S.A.website -www.jblpro.com

En Dehors des Etats-Unis: Contacter votre Distributeur JBL Professional. Une liste c

omplète de nos distributeurs internationaux est disponible sur le site web www.jblpro.com

International: Wenden Sie sich an Ihre örtliche JBL Professional Vertretung. Eine

vollständige Liste der internationalen JBL-Vertretungen fi nden Sie auf userem Website

unter www.jblpro.com

Fuera de los Estados Unidos: Comuníquese con el distribuidor de JBL Professional de

su zona. En nuestro sitio web, www.jblpro.com, encontrará una lista completa de los

distribuidores de JBL International.

P/N 4409747-001 0608 REV A

Francais, Deutsch, Espanol, information at www.jblpro.com

Control 2P Power Supply

Power Supply Holder

MTC2.instructions.111313_Layout 1 11/13/13 11:36 AM Page 1

Produktspecifikationer

Varumärke:	JBL
Kategori:	högtalarstöd
Modell:	MTC-2P
Färg på produkten:	Zwart
Sladdlängd:	1.8 m
LED-indikatorer:	Ja
Certifiering:	UL1449 3, cUL
Respons tid:	0.001 ms
Hållbarhetscertifikat:	RoHS
Antal RJ-11-portar:	3
Förbättrad kabelhantering:	Ja
Fjärrkontroll ingår:	Nee
Överspänningsenergiklassificering:	1650 J
Antal AC-utgångar:	7 AC-uitgang(en)
Nominell inspänning:	125 V
Uttagstyper:	NEMA 5–15R
Kabel (Coax) säkerhet:	Nee
Telefonlinjeskydd:	Ja
Nätverkslinjeskydd:	Nee
Ingångsanslutningar:	NEMA 5-15P
Ljud/video linjeskydd:	Nee
EMI/RFI brusfiltrering:	Ja
EMI/RFI ruisverzwakking:	43 dB