Jensen MPR420 Bruksanvisning

Jensen mottagare MPR420

Läs nedan 📖 manual på svenska för Jensen MPR420 (14 sidor) i kategorin mottagare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/14
INSTALLATION/OWNER'S MANUAL
AM/FM Receiver with Bluetooth
MPR420
2
MPR420 INSTALLATION
Preparation
Please read entire manual before installation.
Before You Start
Disconnect negative battery terminal. Consult a qualified technician for instructions.
Avoid installing the unit where it would be subject to high temperatures, such as from
direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Getting Started
• Remove trim ring from unit.
• Insert the supplied keys into the slots as shown, and slide the unit out of the mounting
sleeve.
• Install mounting sleeve into opening, bending tabs to secure.
• Connect wiring harness and antenna. Consult a qualified technician if you are unsure.
• Certain vehicles may require an installation kit and/or wiring
harness adapter (sold separately).
• Test for correct operation and slide into mounting sleeve to secure.
• Snap trim ring into place.
TYPICAL FRONT-LOAD
MOUNTING METHOD
3
MPR420 INSTALLATION
Wiring Diagram
FUSE
43#DPS DJF#I xvh
Antenna
Connector
When replacing the
fuse, make sure new
fuse is the correct type
and amperage. Using
an incorrect fuse could
damage the radio.
The unit uses
one 10 amp ATC fuse
located beside the wiring
connector.

Produktspecifikationer

Varumärke: Jensen
Kategori: mottagare
Modell: MPR420

Behöver du hjälp?

Om du behöver hjälp med Jensen MPR420 ställ en fråga nedan och andra användare kommer att svara dig




mottagare Jensen Manualer

mottagare Manualer

Nyaste mottagare Manualer