JL Audio SlamPak SLPK-YA-19FXC-Gw Bruksanvisning

JL Audio Inte kategoriserad SlamPak SLPK-YA-19FXC-Gw

Läs nedan 📖 manual på svenska för JL Audio SlamPak SLPK-YA-19FXC-Gw (14 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/14
I N S T A L L A T I O N G U I D E
for the
SLPK-YA-19FXC
SKU# 94670 & 94671
&
SLPK-YA-19FXC-SUB
SKU# 94674
2019-Up Yamaha FX
Thank you for choosing a JL Audio SlamPak™ for your marine sound system.
With proper installation, your new marine audio sound system
will deliver years of listening pleasure.
We strongly recommend that you have your new SlamPak™ installed by your
authorized JL Audio dealer. The installation professionals employed by your
dealer have the necessary tools and experience to disassemble and reassemble
your vessel properly. If you prefer to perform your own installation, please read
this installation guide completely before beginning the process.
If you choose to perform the installation yourself, it is absolutely
vital that the SlamPak™ be properly mounted to the vessel
according to these instructions. Failure to mount the enclosures
properly presents two problems:
1) A loose enclosure presents a serious safety hazard in the event of a
collision, rollover, or sudden deceleration.
2) The sub-bass performance will suffer due to the movement of the
enclosure caused by the force exerted by the woofer(s).
INSTALL AT ION
DIFFICULTY:
ESTIMATED TIME:
3-4 HOURS
Continued on Next Page
55
OUT
OF
SlamPak
SLPK-YA-19FXC / SLPK-YA-19FXC-SUB INSTR_SKU# 011531
MX600/3 Amplifier (x1) VEX Speaker Enclosure (x2) 50A Circuit Breaker (x1)
Rear Logo Appliqué (x2)
Port VEX Adaptor (x1)
Starboard VEX Adaptor (x1)
Port VEX Adaptor Gasket (x1)
Starboard VEX Adaptor Gasket (x1) Back Plate (x2) Amplifier Bracket (x1)
7/16 - 14 x 7/8” Stainless Steel
Hex Head Bolt (x4)
7/16 Stainless Steel
Split Lock Washer (x4)
8-32 Stainless Steel
Flat Washer (x3)
8-32 Stainless Steel
Locknut (x3)
1/4 - 20 x 1Stainless Steel
Hex Cap Screw (x8)
1/4” Stainless Steel
Flat Washer (x10)
1/4” Stainless Steel
Oversized Flat Washer (x6)
1-4 - 20 Stainless Steel
Nylon Insert Locknut (x8) 11Cable Ties (x10)
I N C L U D E D H A R D W A R E
Continued on Next Page
Page 2 • JL Audio, Inc., 2020
SLPK-YA-19FXC / SLPK-YA-19FXC-SUB INSTR_SKU# 011531
SLPK-YA-19FXC Equipment and Hardware
M6 - 1 x 20mm Stainless Steel
Socket Cap Screw (x4)
MBT-CRXv2
Bluetooth Controller (x1)
NOTE: For optimum performance
and reliability, all amplifier controls
have been preset for this SlamPak™
and sealed beneath the control
panel cover. No further adjustment
is necessary.
I N C L U D E D H A R D W A R E
Continued on Next Page
Page 3 • JL Audio, Inc., 2020
SLPK-YA-19FXC / SLPK-YA-19FXC-SUB INSTR_SKU# 011531
SLPK-YA-19FXC Equipment and Hardware (cont.)
SLPK-YA-19FXC-SUB Equipment and Hardware
Clear Sheet
Drilling Template (x1)
NOT SHOWN
Power Harness (x1)
Amplifier Harness (x1)
1.5’ 2-Channel
RCA Interconnect (x1)
8 AWG Power Cable Extension (x1)
Subwoofer Enclosure (x1) Long Bracket (x2) Short Bracket (x2) Latch Bracket (x1)
#6 x 1/2” Stainless Steel
Pan Head Screw (x4)
5/16 - 18 x 1Stainless Steel
Hex Head Bolt (x4)
5/16” Stainless Steel
Split Lock Washer (x4)
5/16” Stainless Steel
Flat Washer (x4) Loctite® Threadlocker (x1)
Loctite® Threadlocker (x1)
2-Pack 1” Heat Shrink (x1)
2-Pack 2” Heat Shrink (x2)

Produktspecifikationer

Varumärke: JL Audio
Kategori: Inte kategoriserad
Modell: SlamPak SLPK-YA-19FXC-Gw

Behöver du hjälp?

Om du behöver hjälp med JL Audio SlamPak SLPK-YA-19FXC-Gw ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad JL Audio Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer