JL Audio Stealthbox SB-POL-RZG3/10TW3 Bruksanvisning

JL Audio Inte kategoriserad Stealthbox SB-POL-RZG3/10TW3

Läs nedan 📖 manual på svenska för JL Audio Stealthbox SB-POL-RZG3/10TW3 (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

I N S T A L L A T I O N G U I D E

for the

SB-POL-RZG3/10TW3

SKU# 94675

2019 & Up Polaris RZR XP 1000, RZR XP 4 1000,

RZR 900 XC, & RZR 4 900

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your

authorized JL Audio dealer. The installation professionals employed by your

dealer have the necessary tools and experience to disassemble and reassemble

your vehicle properly. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely

vital that the Stealthbox® be properly mounted to the vehicle

according to these instructions. Failure to mount the enclosure

properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the

enclosure caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a

collision or sudden deceleration.

INSTALLATION

DIFFICULT Y:

ESTIMAT ED TIME:

2 HOUR S

Enclosure Type: Sealed

Driver Type: 10TW3-D4

Nominal Impedance: 2 ohms

Continuous Power Handling: 400 watts (RMS method)

Continued on Next Page

OUT

SB-POL-RZG3/10TW3 INSTR_SKU# 011535

I N C LUD E D H A R D W A R E

1 2

Continued on Next Page

Page 2 • JL Audio, Inc., 2019

Note: For optimum performance, JL Audio recommends applying the included Foam Strips (or sound damping material) to surrounding plastic panels to reduce unwanted vibrations.

SB-POL-RZG3/10TW3 INSTR_SKU# 011535

BOM ID DescriptionQty SKU

1* 5 153728 1-4 - 20 x 1-1/2” Stainless Steel Low Prole Cap Screw

2* 1 150867 Black Starboard Bae

3 4 153686 3/8 - 16 x 1-1/2” Stainless Steel Hex Head Bolt

4 4 151745 3/8” Stainless Steel Split Lock Washer

5 4 153732 3/8” Stainless Steel Flat Washer

6 2 154047 Top Bracket

7 2 153735 #8 x 1/2” Stainless Steel Pan Head Screw

8 1 153707 Glove Box Latch

9 1 153676 Bottom Bracket

10 1 153734 1/4” Stainless Steel 5/8” Diameter Flat Washer

11 1 153733 #12 x 3/4” Stainless Steel Phillips Pan Head Screw

12 1 153729 1/4 - 20 x 1” Stainless Steel Serrated Flange Head Bolt

- 1 150249 Foam Strips

* Pre-installed on enclosure

P O W E R R E C O M M E N D AT I O N

JL Audio recommends high quality ampliers such as the JL Audio MX300/1. The diagram below shows the recommended crossover settings for the MX300/1. For a detailed description of the

amplier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

C O N N E C T I O N S

Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your

Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for