JL Audio Stealthbox SB-D-CHLGR/12W3v3 Bruksanvisning

JL Audio Inte kategoriserad Stealthbox SB-D-CHLGR/12W3v3

Läs nedan 📖 manual på svenska för JL Audio Stealthbox SB-D-CHLGR/12W3v3 (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

I N S T A L L A T I O N G U I D E

for the

SB-D-CLGR/12W3V3

SKU#94453

2009 & Up Dodge Challenger

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With proper installation, your new vehicle-

specific enclosed subwoofer system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio dealer. The installation

professionals employed by your dealer have the necessary tools and experience to disassemble and reassemble your vehicle

properly. Also, keep in mind that your warranty coverage extends to 2 years if your system is installed or approved by your

authorized JL Audio dealer. If you prefer to perform your own installation, please read this installation guide completely

before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox ® be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

S T E P 1

Clean the trunk out so that you have a good environment to

work in.

Continued on Next Page

S T E P 2

Place the 3” x 3” wax square as shown.

S T E P 3

Thread the included 3/8-16 x 2 1/4” Allen Head Set Screw

into the enclosure with the Allen socket facing out and

approximately 1/4” exposed as shown.

Set the enclosure in place, and press on the enclosure so

that the exposed Allen Head Set Screw marks the 3” x 3” Wax

Square.

SB-D-CLGR/12W3v3 INSTR_SKU# 011294

INS TALLATION

D I F F I C U L T Y :

OUT

ESTIMATED TIME:

1 HOUR

D E T A I L

The hardware discussed in STEP 6 is detailed here. Re-install

the inner fender liner removed in put all of the stuff STEP 5,

you took out of the trunk in back in.STEP 1

C O N G R A T U L A T I O N S !

You have completed the installation for this model!

Enjoy your new Stealthbox®!

Please refer to the Power Recommendation section for an

amplifier recommendation and basic set-up help.

S T E P 6

Using an Allen Wrench, back the 3/8-16 x 2 1/4” Allen Head

Set Screw out of the Stealthbox® as shown, far enough so

that the 3/8 x 1 1/4” Fender Washer, 3/8” Split Lock Washer

and, 3/8-16 Hex Nut can be installed as shown in the DETAIL

below. You may want to hold the Allen Head Set Screw

using the Allen Wrench while tightening this hardware.

S T E P 5

Pull down the rear fender liner so that you have access to the

hole drilled in STEP 4.

Place the Stealthbox® into position, making sure that the

speaker cable is properly attached to the enclosure and that

the 3/8-16 x 2 1/4” Allen Head Set Screw comes through the

hole Drilled in STEP 4.

S T E P 4

Drill a 1/2” hole through the impression made in the 3” x 3”

Wax Square in towards the rear wheel.

*CAUTION*

Before drilling, always make sure that you are not

going to be drilling into any gas lines, brake lines,

tires, transmission lines, electrical wiring, exhaust

systems or anything else that might cause a reduction

in your weekly pay. Always wear eye protection when

drilling.

Page 2 • JL Audio, Inc 2015

SB-D-CLGR/12W3v3 INSTR_SKU# 011294

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered

trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.

#6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign patents pending.

For more detailed information please visit us online at www.jlaudio.com.

(954) 443-1100

w w w . j l a u d i o . c o m

1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y • M I R A M A R , F L O R I D A • 3 3 0 2 5 • U S A

I N C L U D E D H A R D W A R E

1) 3/8-16 x 2-1/4” Allen Head Set Screw 1) 3/8” Split Lock Washer

1) 3/8” x 1-1/4” Fender Washer 1) 3/8 -1 6 Hex Nut

1) 3” x 3” Wax Square 1) 3/8” Flat Washer

S P E C I F I C A T I O N S

Enclosure Type: Acoustic Suspension (sealed)

Driver Type: 12W3v3-2

Nominal Impedance: 2 Ohms

Continuous Power Handling: 500 Watts

P O W E R R E C O M M E N D A T I O N

JL Audio recommends using a high quality amplifier such as the JL Audio XD300/1v2. The diagram below shows

the recommended crossover settings for the XD300/1v2 when being used to power your Stealthbox ®.

The JL Audio XD300/1v2 is a very versatile audio component. Please consult the owner’s manual for even more

detailed information about installing and tuning this amplifier.

M I D / H I G H F R E Q U E N C Y D R I V E R F I T M E N T

A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.

Front Speaker Size / Location: 3 1/2”- Dash / 6”x 9”- Front Doors

Fits JL Audio Models: TR350-CXi, C2-350x - Dash / TR690-TXi, C2-690tx - Doors

Rear Speaker Size / Location: 6 1/2”- Rear Deck

Fits JL Audio Models: TR650CXi, TR650CSi, C2-650x, C2-650, C3-650, C5-650x, C5-650, ZR650CSi

Produktspecifikationer

Varumärke:	JL Audio
Kategori:	Inte kategoriserad
Modell:	Stealthbox SB-D-CHLGR/12W3v3
Färg på produkten:	Zwart
Vikt:	2210 g
Bredd:	348 mm
Djup:	76 mm
Höjd:	358 mm
Blåtand:	Nee
Typ av strömkälla:	DC
Antal USB 2.0-portar:	1
VGA (D-Sub) port(ar):	3
Antal Ethernet LAN (RJ-45)-portar:	1
Ljudingångar:	Ja
Ljudutgång:	Ja
Antal DisplayPorts:	1
Varumärkeskompatibilitet:	DELL
siffra:	1
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A:	2
Kompatibilitet:	Latitude 12 Rugged
Standard enhetstyp:	Tablet