JLab GO Air POP Bruksanvisning

JLab Öronpropp GO Air POP

Läs nedan 📖 manual på svenska för JLab GO Air POP (3 sidor) i kategorin Öronpropp. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/3

We love that you are rocking JLab!

We take pride in our products and fully stand behind them.

GO AIR POP

EARBUDS

YOUR WARRANTY

All warranty claims are subject to JLab authorization

and at our sole discretion. Retain your proof of

purchase to ensure warranty coverage.

Reach out to us at support@jlab.com

or visit jlab.com/contact

Remove tab and close door.

ADDING NEW ADDITIONAL BLUETOOTH DEVICES: /

Turn OFF Bluetooth from any previously connected

device. Turn ON Bluetooth from new device.

Take earbuds out of the case.

Earbuds will automatically enter Bluetooth Pairing.

Select “JLab GO Air Pop” in device settings to connect.

BLUETOOTH PAIRING

One earbud blink blue/white will indicating

ready to pair to your device.

Red light on case indicates charge.

Remove earbuds from case.

Select “JLab GO Air Pop” in your device's

Bluetooth settings to connect.

Voice prompt “You’re connected” followed by

blinking white lights will indicate you are connected.

Bluetooth

Settings

JLab GO Air Pop

jlab.com/register

Product updates How-to tips|

FAQs & more

Earbuds will power off when placed in the case

and start charging the earbuds.

Earbuds will auto power on and connect to

your device when removed.

LEFT RIGHT

VOLUME DOWN: Single tap

SIRI (iOS) or “OK GOOGLE”

(ANDROID): Double tap

TRACK BACK: Press & hold 1+ sec

VOLUME UP: Single tap

PLAY PAUSE: / Double tap

TRACK FORWARD: Press & hold 1+ sec

VOICE PROMPTS

“Hello”: Power ON

“Ready to Pair”: GO Air Pop is

ready to pair to Bluetooth device

“Bluetooth Connected”:

Earbud is connected to device

“Battery Full”: 100-75%

“Battery Medium”: 75-25%

“Low Battery”: Less than 25%

(When power decreases to 10%,

“Low Battery” will play one time)

“Goodbye”: Power OFF

BUTTON FUNCTIONS

Tap either the right or left earbud 3 times for different EQ settings (GO Air Pop will cycle 3 EQ settings).

CUSTOM EQ3 SOUND MODES

JLab SIGNATURE

JLab C3™ signature

sound with amplified

bass and vocals

BALANCED

Even sound with

no additional

enhancements

BASS BOOST

Amplified bass

and sub-bass

CH NARGI G EARBUDS

1 2

ANSWER CALL: Single tap

HANGUP: Double tap

REJECT INCOMING CALLS: Press & hold 1+ sec

EQ CHANGE: Triple tap

Blinks 4x Red

Case less than 25%

(charge case)

Solid Red

Case 100-25%

FITTING

Connect the GO Air Pop into a computer or USB 5V 1A (or less) output device.

CH NARGI G CASE

Place the earbud in the

ear canal and slightly

rotate to adjust for best fit.

Try all ear tips for best

fit and proper seal.

CAUTIONS

• Avoid extreme heat, cold, and humidity.

• Avoid dropping or crushing the earbuds.

• Wax may build up in the earbud tips, lowering the sound quality.

Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.

• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.

• If you experience regular discomfort while using this product, discontinue use and consult your physician.

• We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.

• The left or right earbud can be used independently for music and phone

calls. Simply choose one and take out of the case to connect.

• Only ONE Bluetooth device can be connected at a time. Turn off

Bluetooth on unwanted devices and turn on Bluetooth on chosen device to

connect.

• Fully dry off earbuds before putting in the charging case to avoid any

damage to the case. The earbuds are sweat/water resistant but the case is

not.

Fully dry off the earbuds before

putting in the charging case to

avoid any damage to the case.

The earbuds are sweat/water

resistant but the case is not.

QUICK TIPS

WARNING

Shop products Product alerts Burn-in your headphones| |

JLab Store + Burn-in Tool

JLAB.COM

Instructional videos at: JLAB.COM/MANUALS

TROUBLESHOOTING

Connection failure or earbuds disconnected from each other (Manual Reset)

1 Keep the earbuds in the charging case and forget “JLab GO Air Pop” from your Bluetooth device settings.

2 Quick tap 7x on one earbud in charging case. Earbud blinks blue 4 times.

3 Quick tap 7x on other earbud in charging case. Earbud blinks blue 4 times.

4 Take both earbuds out of the charging case.

One earbud will be solid white and other will blink blue/white indicating ready to pair to your device.

Charging

Blinks Blue

Fully Charged

Solid Blue

Produktspecifikationer

Varumärke:	JLab
Kategori:	Öronpropp
Modell:	GO Air POP
Färg på produkten:	Wit
Vikt:	254 g
Bredd:	77.5 mm
Djup:	15 mm
Höjd:	157.5 mm
Användarmanual:	Ja
Husmaterial:	Kunststof
LED-indikatorer:	Bezig met opladen
Batterikapacitet:	10000 mAh
Typ av förpackning:	Hangende doos
Medföljande kablar:	USB Type-C
Snabbladdning:	Ja
Batteri/Batterispänning:	3.7 V
Trådlös laddning:	Ja
Antal per paket:	1 stuk(s)
Laddningskälla:	USB
USB-strömförsörjning:	Ja
Laddare kompatibilitet:	Activity tracker, Headphones/Headset, Mobile phone/Smartphone
Antal samtidigt anslutna enheter (max):	4
Ingångsgränssnitt:	USB Type-C
USB A-utgångsportar:	2
Antal USB Type-C-portar:	2
Batteriteknik:	Lithium-Polymeer (LiPo)
Snabbladdningsteknik:	Quick Charge 3.0
Total-uteffekt:	18 W
USB Type-C-kontakt:	Ja
Ladda powerbank och enhet samtidigt:	Ja
Ström trådlös laddning:	10 W
USB Typ-A-anslutning:	Ja