Joy-it RB-Heatsink5 Bruksanvisning

Joy-it Inte kategoriserad RB-Heatsink5

Läs nedan 📖 manual på svenska för Joy-it RB-Heatsink5 (5 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
ACTIVE COOLING UNIT FOR RASPBERRY PI 5
RB-Heatsink5
Joy-IT powered by SIMAC Electronics GmbH - Pascalstr. 8 - D-47506 Neukirchen-Vluyn - www.joy-it.net
Dear customer
Thank you for choosing our product. In the following, we will show you
what you need to bear in mind during commissioning and use. Should you
encounter any unexpected problems during use, please do not hesitate to
contact us.
First insert the fan unit into the heat sink and mount it using the four screws
provided.
Now completely remove the protective lm from the thermal pads and place
them on your Raspberry Pi.
ATTENTION! There is a protective lm on both the front and back of the heat
conducting pads. Both must be removed before tting.
1. GENERAL INFORMATION
2. ASSEMBLY
Now place the heat sink on your Raspberry Pi.
Now mount it from the underside of your Raspberry Pi using the two
enclosed screws and washers.
Now insert the fan cable into the fan connection of your Raspberry Pi.
The fan is now ready for use. A separate installation and/or conguration is
not required.

Produktspecifikationer

Varumärke: Joy-it
Kategori: Inte kategoriserad
Modell: RB-Heatsink5

Behöver du hjälp?

Om du behöver hjälp med Joy-it RB-Heatsink5 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Joy-it Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer