Joy-it RB-JoyPi-Addon Bruksanvisning
Joy-it
Inte kategoriserad
RB-JoyPi-Addon
Läs gratis den bruksanvisning för Joy-it RB-JoyPi-Addon (15 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 15 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 8 recensioner. Har du en fråga om Joy-it RB-JoyPi-Addon eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/15
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
JOYPI EXPANSION KIT
RB-JoyPi-Addon
1. GENERAL INFORMATION
Dear Customer,
thank you for choosing our product. In the below, we will show you what
you need to know about commissioning and use of the product.
If you encounter any unexpected problems during use, please feel free to
contact us.
These instructions only refer to the expansion pack for the JoyPi. If you
have any questions about the basic functions of the JoyPi, you can down-
load the main JoyPi manual here.
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
2. ASSEMBLY
First, screw the spacers to the port doubler as seen in the picture below.
Your Raspberry Pi should already be screwed into the JoyPi.
Now you can plug the port doubler onto the Raspberry Pi.
The port doubler is not screwed to the Raspberry Pi, because
the port doubler has to be removed again when you want to
close the JoyPi.
Finally, you only need to connect the GPIO strip of the JoyPi, with the
GPIO strip of the port doubler with the supplied cable.
www.joy-it.net
Pascalstr. 8 47506 Neukirchen-Vluyn
3. INSTALLATION
For the commissioning of the ADC and the pressure and temperature sen-
sor, it is necessary to install the corresponding libraries.
In our prepared image, which you can download here, they are already
installed. If you use your own image, you can install the libraries with the
following commands.
adafruit/Adafruit_CircuitPython_ADS1x15
adafruit/Adafruit_CircuitPython_BMP280
The sample scripts we prepared, are also already present on the image.
You can also download the script directory manually here, or save it to
your desktop with the following commands:
Also, if you are using your own image, you need to enable I2C. To do this,
enter the following command in the terminal:
Now go to 3Interfacing Options and enable I5 I2C.
sudo pip3 install adafruit-circuitpython-ads1x15
sudo apt-get install python3-smbus i2c-tools -y
cd Desktop/
wget https://joy-pi.net/files/files/downloads/joypi/Joy-Pi.zip
sudo raspi-config
unzip Joy-Pi.zip
sudo pip3 install adafruit-circuitpython-bmp280
Produktspecifikationer
| Varumärke: | Joy-it |
| Kategori: | Inte kategoriserad |
| Modell: | RB-JoyPi-Addon |
Behöver du hjälp?
Om du behöver hjälp med Joy-it RB-JoyPi-Addon ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Joy-it Manualer
8 April 2025
8 April 2025
31 Januari 2025
29 Januari 2025
29 Januari 2025
15 Januari 2025
2 Januari 2025
28 December 2024
5 December 2024
5 December 2024
Inte kategoriserad Manualer
- Moki
- Silva
- Eventide
- Ices
- Klein Tools
- Toa
- Ideal
- Goobay
- Envitec
- Sylvania
- Rexing
- Gentrax
- Beringer
- Neno
- Raidsonic
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025