Joy-it SBC-ESP01-RM Bruksanvisning

Joy-it Inte kategoriserad SBC-ESP01-RM

Läs nedan 📖 manual på svenska för Joy-it SBC-ESP01-RM (7 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
ESP 01S RELAY MODULE -
Remotely controllable relay module
1. GENERAL INFORMATION
Dear customer,
thank you very much for choosing our product.
In following, we will introduce you to what to observe while starting up
and using this product.
Should you encounter any unexpected problems during use, please do
not hesitate to contact us.
To use the ESP-01S relay module, you must first program the ESP 01S -
supplied on the product.
For this, we recommend programming the ESP 01S with the ESP8266 -
PROG from .3
2. PROGRAMMING THE ESP 01S RELAY MODULE -
First, the Arduino development environment must be prepared for use
with the ESP8266.
To do this, the following URL is entered in the global settings of the pro-
gram as an :additional board administrator URL
https://arduino.esp8266.com/stable/package_esp8266com_index.json
Next, an additional board library must be installed. Open the board ma-
nager and install the library. ESP8266
Please note that your Arduino development environment must be
restarted if the board library is not displayed.
Once you have successfully installed the board, you can select the Gene-
ric ESP8266 Module from the list of available boards.
Your Arduino development environment is now prepared for the use with
an ESP8266.

Produktspecifikationer

Varumärke: Joy-it
Kategori: Inte kategoriserad
Modell: SBC-ESP01-RM

Behöver du hjälp?

Om du behöver hjälp med Joy-it SBC-ESP01-RM ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Joy-it Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer