Joy-it SBC-OLED01 Bruksanvisning

Joy-it Övervaka SBC-OLED01

Läs nedan 📖 manual på svenska för Joy-it SBC-OLED01 (7 sidor) i kategorin Övervaka. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
OLED DISPLAY 128X64
SBC OLED01-
1. GENERAL INFORMATION
Dear customer,
Thank you for purchasing our product. In the following, we will show you
which things should be noted during the use.
Should you encounter any unexpected problems, do not hesitate to
contact us.
2. I2C ADRESSE
On the backside of the OLED display is a resistor, with which you can set
the I2C address of the display to 0x3D. In the delivery state, the display is
accessible via the I2C address 0x3C.
To do change the address, re solder the resistor marked in the figure.-
3. USAGE WITH ARDUINO
3.2 Code example
Before you can transfer the code example to your Arduino using your
Arduino IDE, you must first install the additional libraries Adafruit GFX
Library Adafruit_SSD1306 (released under the BSD License) and
(released under the ) from BSD License Adafruit.
These libraries allow you to use the display as easily and quickly as pos-
sible. You can search for and install them under
Sketch
Include Library
Manage Libraries
.
You can download our code examples . You can upload the code to here
your Arduino using the button. Make sure that you have selected Upload
Port Board and correctly under
Tools
.
3.1 Connection
OLED Arduino Voltage translator
GND GND GND
VCC VCCb 5V
- 3,3 V VCCa
- A5 B2
SCL - A2
- A4 B1
SDA - A1
i

Produktspecifikationer

Varumärke: Joy-it
Kategori: Övervaka
Modell: SBC-OLED01

Behöver du hjälp?

Om du behöver hjälp med Joy-it SBC-OLED01 ställ en fråga nedan och andra användare kommer att svara dig




Övervaka Joy-it Manualer

Övervaka Manualer

Nyaste Övervaka Manualer