Jung 1202URE Bruksanvisning

Jung Växla 1202URE

Läs nedan 📖 manual på svenska för Jung 1202URE (6 sidor) i kategorin Växla. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/6

Relay switch insert 2-channel

Light Management

Relay switch insert 2-channel

Art.-No.: 1202 URE

Operationsmanual

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Failure to observe the instructions may cause damage to the device and result in fire and

other hazards.

Danger of electric shock. Always disconnect before carrying out work on the devise or

load. At the same time, take into account all circuit breakers that supply dangerous

voltage to the device or load.

Danger of electric shock. Device is not suitable for disconnection from supply voltage.

Danger of electric shock on the SELV/PELV installation. Not suitable for switching SELV/

PELV voltages.

Danger of electric shock. Do not operate the insert without a cover.

These instructions are an integral part of the product, and must remain with the end

customer.

2 Device components

picture 1

(1) Flush-mounted insert

(2) Frame

(3) Pushbutton cover

(4) Adjuster for run-on time of output HLK

(5) Connection terminals for mains voltage and output Kanal 1

(6) Connection terminals for output for HVAC HLK

3 Function

Intended use

- Output for switching light Kanal 1

- Output for switching light, fans, air conditioners, thermostats and motors HLK

1/6

32541323

J:0082541323 30.07.2010

- Operation with suitable cover

- Installation in appliance box to DIN 49073 acc.

Product characteristics

- Output with potential-free NO contact for switching a second electric circuit, not SELV HLK

or PELV

- Switch-on delay of output can be switched off HLK

- Run-on time of output adjustable HLK

- Connection of extensions possible

Function with motion detector or presence detector cover

Output Kanal 1

- Output is switched on if motions are detected and the brightness is below the threshold set

on the cover.

- Output remains switched on as long as motions are detected.

- Output is switched off if no more motions are detected and the run-on time set on the cover

has elapsed.

Output HLK

- Switch-on delay switched on: output is switched on independently of the brightness after

3 minutes if additional motions are detected approx. 2.5 to 3 minutes after the initial

detection.

- Switch-on delay switched off: output is switched on independently of brightness if motion is

detected.

- Output remains switched on as long as motions are detected.

- Output is switched off if no more motions are detected and the run-on time set on the insert

has elapsed.

Behaviour after a mains voltage failure

- Less than 0.2 seconds: switching state is retained

- longer than 0.2 seconds: both channels switch off. The behaviour after mains voltage

return depends on the cover used (see instructions for the cover).

4 Operation

Switching on with pushbutton cover (see Accessories)

Operation on the main device, 2-wire extension or on the installation button is identical.

i Extension operation is only possible if there is a cover fitted on the main device.

Outputs are switched off.

o Press the button.

Output switches on. Kanal 1

When the switch-on delay for output is switched off, output switches on directly. HLK HLK

When the switch-on delay for output is switched on, output switches on with a HLK HLK

time delay, if output is switched on for longer than 3 minutes. Kanal 1

Switching off with pushbutton cover (see Accessories)

Outputs are switched on.

o Press the button.

Output switches off. Kanal 1

Output switches off after the run-on time set on the insert elapses. The run-on time HLK

begins as soon as output has switched off. Kanal 1

Switching on in combination with motion detector or presence detector

Operation is performed with a 2-wire extension or an installation button. Only an overview of the

behaviour is provided here. For additional information, please refer to the instructions for the

cover in question. Operation with an extension is only possible is there is a cover fitted on the

main device.

Outputs are switched off.

2/6

32541323

J:0082541323 30.07.2010

Light Management

Relay switch insert 2-channel

o Press extension.

Output switches on. Kanal 1

When the switch-on delay for output is switched off, output switches on directly. HLK HLK

When the switch-on delay for output is switched on, output switches on after a HLK HLK

time delay of 3 minutes, if no additional motions are detected for approx. 2.5 to 3 minutes

after the extension is operated.

Switching off in combination with motion detector or presence detector

i Combination with motion detector: outputs cannot be switched off.

i Combination with presence detector: the output cannot be switched off. HLK

Outputs are switched on.

o Press extension.

Output switches off for 3 minutes. Any motions that are detected extend the time. Kanal 1

During these 3 minutes output can only be switched on again via the extension. Kanal 1

5 Information for electrically skilled persons

5.1 Fitting and electrical connection

DANGER!

Electrical shock when live parts are touched.

Electrical shocks can be fatal.

Before carrying out work on the device or load, disengage all the

corresponding circuit breakers. Cover up live parts in the working environment.

Connecting and mounting the insert

picture 2: Connection diagram with optional extensions

(1) Flush-mounted insert

(7) Extension insert, 2-wire

(8) Extension insert, 3-wire

(9) Installation button, NO contact

i Outputs and are not protected internally. For device protection, connect a Kanal 1 HLK

10 A miniature circuit breaker upstream.

3/6

32541323

J:0082541323 30.07.2010

Light Management

Relay switch insert 2-channel

Produktspecifikationer

Varumärke:	Jung
Kategori:	Växla
Modell:	1202URE
Färg på produkten:	Stainless steel, White
Inbyggd display:	Nee
Vikt:	1100 g
Bredd:	165 mm
Djup:	170 mm
Höjd:	190 mm
Håll varm funktion:	Ja
Tillgångar:	200 W
På / Av knapp:	Ja
Non-stick beläggning:	Ja
Volym:	0.9 l
AC-ingångsspänning:	230 V