Kanto Yaro 2 Bruksanvisning

Kanto mottagare Yaro 2

Läs nedan 📖 manual på svenska för Kanto Yaro 2 (12 sidor) i kategorin mottagare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/12
User Manual
YARO2 AMPLIFIER
Supporting your digital lifestyle™
English
2
Important Safety Precautions
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
• Protect the power-supply cord from being walked on or
pinched, particularly at plugs, convenience receptacles and
the point where they exit from the apparatus.
• Only use attachments / accessories specified by the
manufacturer.
• Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, the
apparatus does not operate normally, or the apparatus has
been dropped.
• Apparatus shall be connected to a MAINS socket outlet with
a protective earthing connection.
• An appliance input coupler is used as the disconnect device
- the disconnect device shall remain readily operable.
• Batteries or battery packs shall not be exposed to excessive
heat such as sunshine, fire or the like.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE BACK PANEL.NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
DANGEROUS VOLTAGE
The lightning flash with arrowhead, within an
equilateral triangle, is intended to alert the user of
the presence of non-insulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
ATTENTION
The exclamation point within an equilateral
triangle is intended to alert the user of
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the apparatus.
FCC Notice:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Industry Canada Notice:
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
This device complies with Canadian ICES-003 and RSS-210
Le pré sent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence
L’ exploitation est autorisé e aux deux conditions suivantes:
(1)l’ appareil ne droit pas produire de brouillage, et
(2)l’ utilisateur de l’ appareil doit accepter tout brouillage radioé lectrique subi, mê me si le brouillage est susceptible d’ en le
fonctionnement .
3
Supporting your digital lifestyle
™
Introduction
Thank you for choosing , designed by Kanto in Canada. outputs 35W RMS per YARO2 YARO2
channel into 4 Ohm speakers, for remarkably bold and clean sound. Excellent sensitivity and
frequency response provide deep thumping lows and clear, scintillating highs. is an YARO2
amazingly flexible audio system that can accept three input sources and connect to a subwoofer
for enhanced low frequency response. Additionally, it is equipped with a high-quality USB DAC
for digital connection to your computer. operates on a multi-voltage auto-switching YARO2
power source from 110 V to 240 V and can be used worldwide.
We recommend you read all instructions carefully before using the system and keep them for
future reference. Kanto cannot be liable for damage or injury caused by incorrect setup or use of
this product.
This system was carefully tested and inspected during production, and before packaging and
shipping. After unpacking, please check for any damage. It is rare that a unit is damaged
during shipping, but if this happens contact your retailer immediately. You can also call Kanto
directly at 1-888-848-2643 or email support@kantoliving.com.
What’s In the Box?
User
Manuals
x3
x2
‘AAA’
Batteries
YARO2
Amplifier
Remote
Control
AUX USBOPT
BALANCE
TREBLEBASS
YAROV2
Speaker
Wire
x2
AC/DC
Adapter
3.5mm AUX
Cable
Optical
Cable
USB
Cable
x8
Self-Adhesive
Rubber Feet

Produktspecifikationer

Varumärke: Kanto
Kategori: mottagare
Modell: Yaro 2

Behöver du hjälp?

Om du behöver hjälp med Kanto Yaro 2 ställ en fråga nedan och andra användare kommer att svara dig


mottagare Kanto Manualer

Kanto

Kanto Yaro 2 Bruksanvisning

8 September 2024

mottagare Manualer

Nyaste mottagare Manualer

Boss

Boss Acoustic Singer Pro Bruksanvisning

17 December 2024
Boss

Boss Acoustic Singer Live LT Bruksanvisning

17 December 2024
Boss

Boss Acoustic Singer Live Bruksanvisning

17 December 2024
Boss

Boss WAZA-AIR BASS Bruksanvisning

17 December 2024
Ram Audio

Ram Audio DALIMa 10Q Bruksanvisning

17 December 2024
Vimar

Vimar 20590.N Bruksanvisning

16 December 2024
Vimar

Vimar 20590.B Bruksanvisning

16 December 2024
Vimar

Vimar 14590 Bruksanvisning

16 December 2024
Vimar

Vimar 19590.M Bruksanvisning

16 December 2024
Vimar

Vimar 14590.SL Bruksanvisning

16 December 2024