KINGrinder K6 Bruksanvisning

Läs nedan 📖 manual på svenska för KINGrinder K6 (4 sidor) i kategorin kaffekvarn. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
White O-ring & Circlip
Brus
KINGRINDER
MANUAL HAND
COFFEE GRINDER
MANUAL
WHAT’S IN THE BOX
Grinder
Handle
PC L Black O-ring
MODLE: K6
There may be different versions; pictures are for reference only.
Brewing methods
K6
Turkish coffee
20 clicks
Espresso
40 clicks
Moka pot
AeroPress
60~70 clicks
Pour-Over
100 clicks
French Press
120 clicks
HOW TO OPERATE THE GRINDER?
Gently rotate the adjustment nut clockwise until it stops at number 0.
The number 0 is the correct zero position, do not over tighten it to
past number 0.
1.
Rotate the adjustment nut counterclockwise to the recommended
grinding clicks (Please refer to the table below).
2.
Place 30~35g of coffee beans on the grinder.3.
Place the handle on and start grinding.4.
RECOMMENDED GRINDER SETTINGS
※One round is equivalent to 60 clicks.
※For reference only; adjustments may be made according to personal preference.
HOW TO CLEAN THE GRINDER?
Disassemble:
Rotate the adjustment nut anti-clockwise for three or four rotations.1.
Holding the burr set while removing the circlip.2.
Take out the components in order. The burr set (attached with the central
shaft), the bearing cover, and the spring from the burr set. The top bearing
cover and the top bearing from the above. In this state, do not rotate the
adjustment nut as it is an unnecessary step.
3.
Assemble:
Put the components in order. Place the spring and the bearing cover into the
burr set and install the burr set back to the grinder.
1.
While holding the burr set, place the top bearing and the top bearing cover.
Note that there are two shapes of the top bearing cover: flat design & curved
design. Ensure that the curved design of the top bearing cover faces upward.
2.
Slide the circlip onto the top bearing cover while still holding the burr set. 3.
Take out the black O-ring .from the groove on the PC lid1.
Insert the provided white O ring.2.
Ensure that on the
the white O-ring is correctly installed into the groove
handle for proper fixation.
3.
HOW TO ASSEMBLE THE PC LID AND HANDLE?

Produktspecifikationer

Varumärke: KINGrinder
Kategori: kaffekvarn
Modell: K6

Behöver du hjälp?

Om du behöver hjälp med KINGrinder K6 ställ en fråga nedan och andra användare kommer att svara dig




kaffekvarn KINGrinder Manualer

kaffekvarn Manualer

Nyaste kaffekvarn Manualer