KJB Security Products DVR261WA Bruksanvisning

KJB Security Products övervakningskamera DVR261WA

Läs nedan 📖 manual på svenska för KJB Security Products DVR261WA (1 sidor) i kategorin övervakningskamera. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

1 3 2

3. Assemble & disassemble DVR cover

Disassemble the DVR cover

1. Hold the DVR from the bottom by left hand.

Carefully twist the cover of DVR by right

hand following red arrow pointed direction.

2. Remove the cover by

following red arrow pointed

direction.

1. Align the guiding points on the cover

to the red arrow mark on the DVR before assembly.

Assemble the DVR cover

2. Twist the cover by following

red arrow pointed direction

until it is properly locked.

Warning! Follow instructions below to avoid lens damage.

Right hand

Left hand

4. Charge battery

5. Format memory card

Connect to PC via USB cable

1. Remove the cover from the DVR and connect the supplied USB cable

into the device.

2. Plug the USB cable to PC, the green Charge LED of the device will

illuminate to show the charging is in process.

3. Green LED will turn off when the battery is fully charged.

Charge LED(Green)

When battery is fully charged,

the green LED will turn off.

Power LED(Blue)

Rec LED(Red)

LED bar

1. Long press the Format Button and hold.

2. Use another finger to press the Power On

button for 2 seconds.

3. Power LED will illuminate Blue, hold the Format

button until the Rec LED starts to blink.

4. Release the Format button. Rec LED will go

out after 5 seconds to show the formatting is

completed.

1. Names and parts

2. Package Content

USB cable

4GB

Lock

Adapter

Memory Card

WARNING: DO NOT FILL THE CUP WITH HOT WATER.

TO-GO Cup x 3

1.CMOS Lens

2.USB Port

3.Format Button

4.Continuous Rec(Left)/

Motion Detection Rec

(Right)

5.Reset Button

6.ON/REC Button

Wi-Fi Button

7.Memory Card Slot

8.Vibration On/Off

Switch

5 4

V1.0

PV-CC10W

1080p Coffee Cup Lid Wi-Fi DVR

Quick Guide

LawMate, innovation never stops

8.3 Vibration On/Off

Switch to On/Off to activate/deactivate vibration mode.

8.2 WiFi Operation

With device powered on, short press to turn on Wi-Fi function.

To turn off the WiFi function, just short press

For more information about WiFi connection setup, please refer to

PV Cam Viewer quick guide.

6. Retrieve files from DVR

1. Use memory card reader to download video/photo files.

2. With the device powered on and memory card inserted, connect the

device to PC by USB cable. It will be recognized by PC as an external

drive for user to retrieve the files.

There are two ways to download video/photo files.

Date a time tnd set ing

8. Operation

Please note, memory card needs to be formatted on the device

for the unit to recognize it. Formating memory card by a PC is

not recommended and may result in recording failure.

Please refer to the Synchronize the Time steps on

the PV Cam Viewer for IP Cam quick guide.

8.1 Instant Recording

When the unit is assembled,press the area on the cover for 3

seconds. DVR will power on and start to record automatically after

vibrating once. To turn off the device, press the area on the cover

for 3 seconds and the DVR will be turned off after vibrating twice.

2 3

Produktspecifikationer

Varumärke:	KJB Security Products
Kategori:	övervakningskamera
Modell:	DVR261WA
Färg på produkten:	Black, Blue
Sladdlängd:	2 m
Kontaktledarmaterial:	Goud
Överföringshastighet:	8.16 Gbit/s
Harmoniserad systemkod (HS):	84733080
Könskoppling:	Mannelijk/Mannelijk
Anslutning 1:	HDMI Type A (Standaard)
Anslutning 2:	HDMI Type A (Standaard)