Klein Tools KTB1 Bruksanvisning

Klein Tools powerbank KTB1

Läs nedan 📖 manual på svenska för Klein Tools KTB1 (6 sidor) i kategorin powerbank. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/6

The Klein Tools KTB1 is a lithium-ion powered portable battery

(power bank) designed to charge common mobile devices like

cell phones, tablets, portable batteries, headphones, and other

smaller USB devices. The KTB1 is equipped with Qualcomm

Quick

Charge

technology, delivering up to 75% faster charging versus

conventional USB charging. The rugged, compact design with

impact resistant housing makes the KTB1 a versatile battery for

active, professional, and daily use.

GENERAL SPECIFICATIONS

• Cell Type: 18650

• Cell Chemstry: Li-Ion

• Output Capacity: 36Wh (10050 mAh)

• Charging Time: Full charge in 3 to 7 hours*

• Qualcomm Quick Charge 3.0 USB-A output (18W maximum):

• 3A • 2A • 1.5A 5 - 6V DC: 6 - 9V DC: 9 - 12V DC:

• USB-C input/output (15W maximum): 5V DC, 3A

• Total Maximum Output (all ports): 18W

• Shelf Life: Charge every 3 months

• Life Expectancy: Up to 300 cycles typical (depending on use

& care)

• Charging Requirements:

5V DC, 1A min. recommended

• Operating/Charging Temperature: ° ° ° °32 to 104 F (0 to 40 C)

• Storage Temperature: Up to 3 months: 14° to 104°F (-10° to

40°C)

• Storage Humidity: <75% Relative humidity

• Operating/Storage Altitude: 6562 ft. (2000 m)

• Dimensions: 2.5" x 4.1" x 1.1" (64 mm x 105 mm x 26 mm)

• Weight: 9.5 oz. (270 g)

• Relative Humidity: <85% non-condensing

• Drop Protection: 3.3 ft. (1 m)

• Standards:

UL2056: 2015, UL60950-1, EU 2015/863,

EC 1907/2006, EN55032:2015, EN61000-3-2:2014,

EN61000-3-3: 2013, EN55035: 2017, ICES – 003:2016,

IEC 60950-1: 2005, CAN ICES-3(B)/NMB-3(B)

*Charging time depends on charger output

Specifications subject to change.

WARNINGS

Read, understand, and follow these instructions to ensure safe

operation. Failure to observe these warnings can result in risk of

fire, electric shock, serious injury and/or property damage.

•

Keep these instructions for future reference.

•

DO NOT use the power bank in excess of its output rating.

Overload outputs above rating may result in a risk of fire or

injury to persons.

•

Use of a power supply, charger, or cable not recommended or

sold by power pack manufacturer may result in a risk of fire

or injury to persons.

•

DO NOT use the power bank that is damaged or modified.

Damaged or modified batteries may exhibit unpredictable

behavior resulting in fire, explosion or risk of injury.

•

DO NOT subject to vibration, impacts, or drops. The housing

may not show signs of damage, but internal components may

have been compromised. It is advisable to replace the unit if

any such severe events occur.

•

DO NOT expose power bank to rain or snow.

•

Keep away from high voltage devices.

•

DO NOT attempt to repair battery or charging cable. There are

no user-serviceable parts.

•

Risk of Fire and Burns. Do Not Open, Crush, Heat Above

140 F (60 C), or Incinerate. Follow Manufacturer’s ° °

Instructions.

SYMBOLS ON PRODUCT

Warning or Caution

Risk of Electrical Shock

Read instructions before using

Conformité Européenne. Conforms with European

Economic Area directives

WEEE – Battery disposal

Recyclable

Conforms with BCS regulations of California Energy

Commission

This product has been independently tested by Intertek and

meets applicable published standards

Qualcomm® Quick Charge technology

FEATURE DETAILS (FIG.A)

Battery status indicator

Power button

Auto-sensing Qualcomm® Quick Charge port (USB-A)

Auto-sensing Input/Output USB-C port

CLEANING

Be sure KTB1 is disconnected from all power sources and

devices. Use clean, dry, soft-lint-free cloth to wipe down the

entire unit.

DO NOT use abrasive cleaners or solvents. DO NOT use metal

objects to clean USB ports.

MAINTENANCE

Recharge as needed. There are no pre-designated intervals at

which to recharge as long as you are using regularly. Avoid

discharging completely on a regular basis, as this can impact

overall life.

Regularly inspect ports and charging cable for any debris, dirt,

damage, and corrosion. attempt to fix. Replace KTB1 or DO NOT

cable as needed.

STORAGE

If storing for more than 1 month, charge completely before

storage, and recharge approximately every 3 months to avoid full

discharge.

Store in cool temperatures, mild humidity, and away from direct

sunlight (See General specifications). Leaving in a vehicle or

other confined spaces in extreme hot temperatures can lead

to decrease in service life, overheating, or fire. Extreme cold

temperatures below the specified storage range can also harm

performance and service life.

Keep away from corrosive chemicals and gases.

After taking out of storage, inspect visually to make sure KTB1

and all accessories look satisfactory. Allow unit to return to

ambient conditions before recharging or charging other devices.

Warranty

www.kleintools.com/warranty

DISPOSAL / RECYCLE

Do not place equipment and its accessories in the trash.

Items must be properly disposed of in accordance with

local regulations. Please see www.epa.gov or

www.erecycle.org for additional information.

OPERATING INSTRUCTIONS

SEE OTHER SIDE

CUSTOMER SERVICE

KLEIN TOOLS, INC.

450 Bond Street, Lincolnshire, IL 60069 1-877-775-5346

customerservice@kleintools.com www.kleintools.com

KTB1

10050mAh PORTABLE BATTERY - INSTRUCTIONS

ENGLISH

BOTTOM

BACK

FRONT

SIDE

TOP

3 4

Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and

other countries.

Quick Charge is a trademark of Qualcomm Incorporated. All Qualcomm Incorporated

trademarks are used with permission.

Qualcomm Quick Charge is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.

5013348

High-Speed Charging Powered By:

OPERATING INSTRUCTIONS

Read these instructions carefully before operating and keep for future

reference.

CHARGING KTB1

NOTE: DO NOT attempt to insert other USB connector types into USB-A

or USB-C ports (FIG. B)

NOTE: Charge completely before using. To maximize Li-ion battery

life, see Maintenance and Storage sections (other side).

• Connect the included cable to the USB-C Input/Output port

, then

connect the other end to any powered USB-A port.

• The battery level indicator LEDs

will illuminate (see Table 1).

• A full charge could take 4 to 8 hours, depending on the charger’s output.

TABLE 1

Not Illuminated Solid Green Blinking Green Solid Red Blinking Red

LED Status % Charged

Bottom LED blinking red 0% to 10% charged

Bottom LED blinking green 11% to 25% charged

Bottom LED solid green

Next LED blinking green 26% to 50% charged

Bottom 2 LEDs solid green

Next LED blinking green 51% to 75% charged

Bottom 3 LEDs solid green

Next LED blinking green 76% to 99% charged

All LEDs solid green 100% charged

BATTERY STATUS INDICATORS

Press the power button

to check KTB1's battery level (Table 2).

The indicator LEDs

will turn on, and will automatically turn off after

10 seconds if the power button is not pressed again, or if no device is

connected for charging. If the battery malfunctioned, pressing NOTE:

power button

will indicate error status (Table 3).

TABLE 2

Not Illuminated Solid Green Blinking Green Solid Red Blinking Red

LED Status Charge Remaining

All LEDs solid green 76% to 100%

Bottom 3 LEDs solid green 51% to 75%

Bottom 2 LEDs solid green 26% to 50%

Bottom LED solid green 11% to 25%

Bottom LED blinking red 1% to 10%

No LEDs illuminated 0%

OPERATING INSTRUCTIONS

CHARGING DEVICES

NOTE: For best results, use cable provided with your device.

Auto-Sensing ports: The outputs

will automatically turn on

when a device is connected. Certain devices that require very low NOTE:

current to charge may not be detected by the auto-sensing feature. For

such devices, press the power

button to begin charging. The status

indicator light may shut-off, but charging will continue on such devices.

1. Connect the cable to your device.

2. Connect the charging cable to one of KTB1’s USB ports

The battery status indicator LEDs

illuminate and charging begins.

LEDs will remain illuminated as long as charging is occurring. The

device being charged should also provide indication that charging

has begun.

3. KTB1 will automatically shut down once charging is complete and

current is no longer being drawn by the device.

TROUBLESHOOTING

The KTB1 has built-in advanced protection to prevent damage to the

battery. The battery has protection for Output over-current, Short-

circuit, Voltage drop, and High/Low Temperature. If any of these occur,

refer to Table 3:

TABLE 3

Not Illuminated Solid Green Blinking Green Solid Red Blinking Red

LED Possible Issue

Over-current or short circuit: KTB1 will automatically shut down.

Disconnect KTB1 from the charger or device being charged.

Wait for 5-seconds and then reconnect the device being charged

or battery charger. Press the power button to reset and begin

charging.

High or low temperature: If KTB1 senses abnormal operating

temperatures, high or low, it will shut down. It will not recharge or

charge until the battery returns to normal operating temperatures

(See Operating Temperature in General Specifications section). All

status LEDs will flash green if the power button is pressed. The LED

status will return to normal (See tables 1 & 2) ONLY after KTB1

senses normal temperatures. Disconnect KTB1 from all chargers

and devices.

Voltage drop: If KTB1's voltage level drops (discharge over time

or simply drained completely), it will enter Low Power Protection

Mode. The bottom LED will illuminate solid red for 2 seconds when

the power button is pressed. KTB1 will NOT support any device

charging at this time, and must be recharged to a minimum of 5%

before the output ports will activate for charging.

KTB1 will not recharge if:

1. The cable is not properly connected to charger output or battery input.

Check connection.

2. The charging cable is damaged.

Replace with equivalent cable.

3. The charging port or device is not able to supply the minimum voltage and

current for charging.

Connect to appropriate charging source.

4. The connector on the charger or battery is damaged.

Replace charger or battery.

5. An internal battery fault has occurred inside KTB1, preventing the battery

from recharging. See scenarios above. If none apply, KTB1 may be damaged.

Contact Klein Tools Customer Service. DO NOT ATTEMPT TO REPAIR.

ENGLISH

Type C

Micro-B

Mini-B

Micro-A

Mini-A

FIG. B

VISTA SUPERIOR

3 4

ESPAÑOL

Qualcomm es una marca registrada de Qualcomm Incorporated, registrada en los Estados Unidos

y otros países.

Quick Charge es una marca registrada de Qualcomm Incorporated. Todas las marcas registradas de

Qualcomm Incorporated se usan con permiso.

Qualcomm Quick Charge es un producto de Qualcomm Technologies, Inc. y/o sus subsidiarias.

La KTB1 de Klein Tools es una batería portátil (cargador) de iones

de litio diseñada para cargar dispositivos móviles comunes como

teléfonos celulares, tabletas, baterías portátiles, audífonos y otros

dispositivos USB pequeños. La KTB1 está equipada con la tecnología

Quick ChargeTM de Qualcomm®, para proporcionar una carga 75%

más rápida que la convencional. El diseño resistente y compacto

con carcasa resistente a impactos convierte a la KTB1 en una batería

versátil para el uso diario, activo y profesional.

ESPECIFICACIONES GENERALES

• Tipo de celda: 18650

• Química de la celda: Iones de litio

• Capacidad de salida: 36Wh (10050mAh)

• Tiempo de carga: Carga completa en 3 a 7horas*

• Qualcomm Quick Charge 3.0 salida USB-A (máximo 18W):

• 3A • 2A • 1,5A 5 - 6VCD: 6 - 9V CD: 9 - 12V CD:

• Entrada/salida USB-C (máximo 15W): 5V CD, 3A

• Máximo total de salida (todos los puertos): 18W

• Vida útil de almacenamiento: Carga cada 3meses

• Vida útil esperada: hasta 300ciclos normales (dependiendodeluso y el

cuidado)

• Requisitos de carga:

5V CD, 1A mín. recomendado

• Temperatura de funcionamiento/carga: °32°F a 104 F (0°C a

40 C)°

• Temperatura de almacenamiento: hasta 3meses: 14°F a 104°F

(-10°C a 40°C)

• Humedad de almacenamiento: <75% de humedad relativa

• Altitud para su correcto funcionamiento

y almacenamiento: 6562' (2000m)

• Dimensiones: 2,5" × 4,1" × 1,1" (64mm × 105mm × 26mm)

• Peso: 9,5oz (270g)

• Humedad relativa: <85%, sin condensación

• Protección ante caídas: 3,3' (1m)

• Normas:

UL2056: 2015, UL60950-1, EU 2015/863,

EC 1907/2006, EN55032:2015, EN61000-3-2:2014,

EN61000-3-3: 2013, EN55035: 2017, ICES – 003:2016,

IEC 60950-1: 2005, CAN ICES-3(B)/NMB-3(B)

*El tiempo de carga depende de la salida del cargador

Especificaciones sujetas a cambios.

ADVERTENCIAS

Lea, comprenda y siga estas instrucciones para garantizar un

funcionamiento seguro. El incumplimiento de estas advertencias puede

provocar riesgo de incendio, choque eléctrico, lesiones personales y/o

daños materiales graves.

• Conserve estas instrucciones para consultarlas en el futuro.

• NO use la batería excediendo la capacidad de salida. Las sobrecargas de

salida por encima de la capacidad pueden provocar riesgo de incendio o

lesiones personales.

• Usar una fuente de alimentación, cargador o cable no recomendado ni

vendido por el fabricante de la batería puede provocar riesgo de incendio

o lesiones personales.

• NO use baterías dañadas o modificadas. Las baterías dañadas o

modificadas pueden presentar comportamientos impredecibles que

pueden provocar incendios, explosiones o riesgos de lesiones.

• NO la someta a vibraciones, impactos o caídas. La carcasa puede que no

muestre señales de daño, pero los componentes internos pueden haber

estado comprometidos. Se recomienda reemplazar la unidad si sufre

alguno de estos eventos de gravedad.

• NO exponga la batería a la lluvia ni a la nieve.

• Mantenga la unidad lejos de dispositivos de alto voltaje.

• NO intente reparar la batería o el cable de carga. No contiene piezas que

el usuario pueda reparar.

• Riesgo de incendio y quemaduras. No abra, aplaste, caliente por encima

de 140 F (60 C), o queme. Siga las instrucciones del fabricante.° °

SÍMBOLOS DEL PRODUCTO

Advertencia o precaución

Riesgo de choque eléctrico

Lea las instrucciones antes de usarlo

Conformité Européenne. Cumple con las normas del

ÁreaEconómica Europea

WEEE – Eliminación de la batería

Reciclable

Cumple con las normas BCS de la Comisión de

EnergíadeCalifornia

Este producto p3-ha sido probado de manera independiente

porIntertek y cumple con las normas publicadas vigentes

Tecnología Quick Charge de Qualcomm

DETALLES DE LAS CARACTERÍSTICAS (FIG. A)

Indicador de estado de la batería

Botón de encendido

Puerto de detección automática Quick Charge (carga rápida)

deQualcomm® (USB-A)

Puerto de detección automática Input/Output (entrada/salida)

USB-C

LIMPIEZA

Asegúrese de que la KTB1 está desconectada de cualquier fuente

de energía o dispositivo. Utilice un paño limpio y seco que no

deje pelusas para limpiar toda la unidad.

NO utilice solventes ni

limpiadores abrasivos. NO utilice objetos metálicos para limpiar

los puertos USB.

MANTENIMIENTO

Recargue según sea necesario. No hay intervalos predefinidos

según los cuales se deba recargar, siempre y cuando use la batería

regularmente. Evite descargarla completamente de manera regular, p3-ya

que esto puede afectar su vida útil general.

Inspeccione regularmente los puertos y el cable de carga, verificando

que no tengan residuos, suciedad, daños y corrosión. intente NO

repararla. Reemplace la KTB1 o su cable, según sea necesario.

ALMACENAMIENTO

Si la almacena por más de 1mes, cárguela completamente antes de

almacenarla, y recárguela aproximadamente cada 3meses para evitar

que se descargue completamente.

Almacénela en un ambiente fresco, con humedad leve, y lejos

de la luz solar directa (ver Especificaciones generales). Si la deja

en un vehículo o en otros espacios reducidos bajo temperaturas

extremadamente altas, se puede reducir su vida útil, provocar

sobrecalentamiento o un incendio. Las temperaturas extremadamente

frías, por debajo del rango de almacenamiento especificado también

pueden afectar el rendimiento y la vida útil de la batería.

Manténgala alejada de gases y sustancias químicas corrosivas.

Después de retirarla del almacenamiento, realice una inspección

visual para asegurarse de que la apariencia de la KTB1 y de todos sus

accesorios es correcta. Permita que la unidad regrese a condiciones

de ambiente antes de recargarla o cargar otros dispositivos.

Garantía

www.kleintools.com/warranty

ELIMINACIÓN/RECICLAJE

No arroje el equipo ni sus accesorios a la basura. Los

elementos se deben desechar correctamente de acuerdo

con las regulaciones locales. Visite www.epa.gov o

www.erecycle.org para obtener más información.

INSTRUCCIONES DE FUNCIONAMIENTO

VER EN EL REVERSO

SERVICIO AL CLIENTE

KLEIN TOOLS, INC.

450 Bond Street, Lincolnshire, IL 60069 1-877-775-5346

customerservice@kleintools.com www.kleintools.com

5013348

KTB1

BATERÍA PORTÁTIL DE 10 050 MAH - INSTRUCCIONES

FIG. A

VISTA INFERIOR

VISTA TRASERA

VISTA FRONTAL

VISTA

LATERAL

Carga rápida alimentada por:

Produktspecifikationer

Varumärke:	Klein Tools
Kategori:	powerbank
Modell:	KTB1
Färg på produkten:	Wit
Vikt:	1500 g
Bredd:	508 mm
Djup:	108 mm
Höjd:	127 mm
Pekskärm:	Nee
Inkluderar AC-adapter:	Nee
Mikrofon, linjeingång:	Nee
MIDI ut:	Nee
Equalizerinställningar:	Ja
Rackmontering:	Ja
Frekvensomfång:	2 - 20000 Hz
Strömförsörjning via USB:	Nee
Antal band equalizer:	2
AUX ingång:	Ja
Antal kanaler:	2 kanalen
Apple dockningskompatibilitet:	Niet ondersteund
Internetanslutning krävs:	Nee
Rackkapacitet:	0U
Synkronisering av ingångsimpedans:	4000 Ohm
Bearbetar digitalt ljud:	0 Bit
Maximal ingångsnivå:	0.03 V
Linjesignal-till-brusförhållande (SNR):	80 dB