Klein Tools LAN Scout Jr. VDV526-052 Bruksanvisning

Klein Tools Kablar för PC och kringutrustning LAN Scout Jr. VDV526-052

Läs nedan 📖 manual på svenska för Klein Tools LAN Scout Jr. VDV526-052 (16 sidor) i kategorin Kablar för PC och kringutrustning. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/16
Instruction
Manual
Español pág. 9
English p. 1
Português pág. 17
Français p. 25
LAN Scout™ Jr.
VDV526-052
• EaSY to rEaD
LcD ScrEEN
• Data caBLE tEStING
• DEtEctS SHortS,
opENS, rEVErSaLS,
MISWIrES, aND
SpLIt paIrS
• toNE GENErator
• auto poWEr-off
ENGLISH

2
LAN Scout™ Jr.


The Klein Tools LAN Scout™ Jr. is a portable data cable tester. It tests and
troubleshoots RJ45 terminated cables and provides built-in tone generation
for cable tracing.
  4.6" x 2.3" x 1.1" (11.7 x 5.8 x 2.8 cm)
  4.0 oz. (115 grams) with battery and remote
  0°C to 50°C / 32°F to 122°F
  -20°C to 60°C / -4°F to 140°F
  10% to 90%, non-condensing
  between any two connectors pins without damage:
 66V DC or 55V AC
 : 6V alkaline batteries - 4 x LR44
 3.5 years
 80 hours
  Shielded or Unshielded; Cat-7, Cat-6x, Cat-5E, Cat-5,
Cat-4, Cat-3
  0 to 1000 feet (305 meters)
 :
1.5 feet (0.5 meters)

To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
• The LAN Scout™ Jr. is designed for use on unenergized cabling
systems. Connecting the LAN Scout™ Jr. to live AC power may damage
it and pose a safety hazard for the user.
• Poorly terminated RJ plugs have the potential to damage the jack on
the LAN Scout™ Jr. Visually inspect a RJ plug before inserting it into
the tester. The contacts should always be recessed into the plastic
housing of the plug. Plugging 6-position plugs into the 8-position jack
on the tester has the potential to damage the outer-most contacts of
the jack unless the plug is specically designed for
that purpose.
4

The LAN Scout™ Jr. has a single button to both start a test and select other
functions and options. Presses of less than about 1 second (short press) and
more than 1 second (long press) are recognized differently.
 With the LAN Scout™ Jr. off, each short
press of the button causes a cable test to be executed and the results
displayed for 20 seconds before powering off. “TEST” is displayed
while testing is being performed. If another short press occurs before
the 20 second time out another test and 20 second time out begin.
If the button is pressed and held until “LOOP” is displayed and then
released, tests are run continuously and the display updated. The LAN
Scout™ Jr. will turn off automatically if there is no test result change
for 5 minutes. A long press of the button will cause the LAN Scout™
Jr. to exit cable test loop mode and enter mode selection as discussed
below.
 Starting with the LAN Scout™ Jr. off, a
long press of the button will cause the LAN Scout™ Jr. to enter mode
selection. In mode selection the LAN Scout™ Jr. cycles through cable
test and tone generator modes. The mode displayed when the button
is released will begin execution. From powered off, the modes in order
are:
  Cable test that loops continuously until it times out or
is exited by a long press that reenters mode selection. Used to
troubleshoot intermittent problems.
  The next four modes
are all tone generator modes with different sounds. The “Hi Lo”
tones are made up of two frequencies with different timings. “Hi”
and ”Lo” are single frequency. Once in a tone mode, short presses
change the pins carrying tone. The pins with tone are displayed. In
a tone mode, the Jr. will turn off automatically 30 minutes after the
last button press or by exiting to mode select with a long press.
  When the button is released with “OFF” displayed, the Jr. will
power off. Once in one of the above modes, OFF is the rst mode
offered upon exiting to mode select. To select a different mode
other than OFF, continue to hold the button down and the next
mode in rotation will be displayed next.
  The cable test mode is the single cable test mode with 20
second timeout that a short press from powered off executes.


Produktspecifikationer

Varumärke: Klein Tools
Kategori: Kablar för PC och kringutrustning
Modell: LAN Scout Jr. VDV526-052

Behöver du hjälp?

Om du behöver hjälp med Klein Tools LAN Scout Jr. VDV526-052 ställ en fråga nedan och andra användare kommer att svara dig


Kablar för PC och kringutrustning Klein Tools Manualer

Klein Tools

Klein Tools LAN Scout Jr. VDV526-052 Bruksanvisning

9 September 2024

Kablar för PC och kringutrustning Manualer

Nyaste Kablar för PC och kringutrustning Manualer

Rocstor

Rocstor Y10A295-B1 Bruksanvisning

11 December 2024
Rocstor

Rocstor Y10A101-B2 Bruksanvisning

11 December 2024
Rocstor

Rocstor Y10A296-B1 Bruksanvisning

11 December 2024
Avenview

Avenview FO8K-DP-50-MM Bruksanvisning

11 December 2024
Intenso

Intenso W140A3C Bruksanvisning

10 December 2024
Audio-Technica

Audio-Technica AT-SC700BB Bruksanvisning

7 December 2024
Audio-Technica

Audio-Technica AT-IC500X Bruksanvisning

7 December 2024
Audio-Technica

Audio-Technica AT-TC1000 Bruksanvisning

6 December 2024
Audio-Technica

Audio-Technica AT-IC1000 Bruksanvisning

6 December 2024
Audio-Technica

Audio-Technica AT-IC700R Bruksanvisning

6 December 2024