Kodak i1220 Plus Bruksanvisning

Kodak Scanner i1220 Plus

Läs nedan 📖 manual på svenska för Kodak i1220 Plus (47 sidor) i kategorin Scanner. Denna guide var användbar för 14 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/47
Safety
User Precautions
Place the scanner on a sturdy, level work surface capable of supporting 5.5 kg (12 lbs).
Do not install the scanner in a location subject to dust, humidity or steam. This may cause electrical shock or a fire. Only use
the scanner and power supply indoors in a dry location.
Make sure the electrical power outlet is located within 1.52 meters (5 feet) of the scanner and is easily accessible.
Use only the power cord that was provided with the scanner. Using any other power cord may cause electrical shock and/or
damage the product.
Be sure the power cord is securely plugged into the wall outlet. Failure to do so may cause electrical shock or fire.
Do not damage, knot, cut or modify the power cord. This may cause electrical shock or fire.
The scanner requires a dedicated power outlet. Do not use an extension cord or power strip with the scanner.
Use only the AC adapter that is supplied with the scanner; Model Tectrol NU60-C240250-13 or Model CWT CAE060242. Do
not use the scanner’s AC adapter with any other product.
Leave sufficient space around the power outlet so it can be easily unplugged in case of an emergency.
Do not use the scanner if it becomes inordinately hot, has a strange odor, emits smoke, or makes unfamiliar noises.
Immediately stop the scanner and disconnect the power cord from the power outlet. Contact Kodak Service.
Do not disassemble or modify the scanner or the AC power adapter.
Do not move the scanner with the power cord and interface cable attached. This may cause damage to the cord/cable.
Remove the power cord from the wall outlet before moving the scanner.
Follow the Kodak recommended cleaning procedures. Do not use air, liquid or gas spray cleaners. These cleaners displace
dust, dirt and debris to another location within the scanner, which may cause the scanner to malfunction.
Material Safety Data Sheets (MSDS) for chemical products are available on the Kodak website at: www.kodak.com/go/msds.
When accessing the MSDSs from the website, you will be required to provide the catalog number of the consumable you
want the Material Safety Data Sheet for. See the section entitled, “Supplies and consumables” later in this guide for supplies
and catalog numbers.
Environmental information
The Kodak i1200/i1300 Plus Series Scanners are designed to meet worldwide environmental requirements.
Guidelines are available for the disposal of consumable items that are replaced during maintenance or service; follow local
regulations or contact Kodak locally for more information.
For disposal or recycling information, contact your local authorities or, in the USA, visit the Electronics Industry Alliance
website: www.eiae.org.
The product packaging is recyclable.
Parts are designed for reuse and recycling.
The Kodak i1200/i1300 Plus Series Scanners are Energy Star compliant and are shipped from the factory with the default
time set to 15 minutes.
European Union
This symbol indicates that when the last user wishes to discard this product, it must be sent to appropriate
facilities for recovery and recycling. Please contact your local Kodak representative or refer to www.kodak.com/
go/recycle for additional information on the collection and recovery programs available for this product.
Acoustic emission
Maschinenlärminformationsverordnung – 3, GSGV
Der arbeitsplatzbezogene Emissionswert beträgt <70 dB(A).
[Machine Noise Information Ordinance — 3, GSGV
The operator-position noise emission value is <70 dB(A).]
Power system connection
This product is also designed for Norwegian IT power system with phase-to-phase voltage 230V.
EMC statements
United States: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of these measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for additional suggestions.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment. Where shielded interface cables have been provided with the product or specified additional
components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to
ensure compliance with FCC regulation.
Korea: As this equipment has obtained EMC registration for household use, it can be used in an area including residential
areas.
Japan: This is a Class B product based on the standard of the Voluntary Control Council for interference by information
Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio
interference. Install and use the equipment according to the instruction manual.

Produktspecifikationer

Varumärke: Kodak
Kategori: Scanner
Modell: i1220 Plus

Behöver du hjälp?

Om du behöver hjälp med Kodak i1220 Plus ställ en fråga nedan och andra användare kommer att svara dig




Scanner Kodak Manualer

Scanner Manualer

Nyaste Scanner Manualer