Konig CMP-NWIPCAM31 Bruksanvisning

Konig Webbkamera CMP-NWIPCAM31

Läs nedan 📖 manual på svenska för Konig CMP-NWIPCAM31 (129 sidor) i kategorin Webbkamera. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/129

CMP-NWIPCAM22

CMP-NWIPCAM31

MANUAL (p. 2)

IP Wireless Network Camera

ANLEITUNG (S. 11)

IP WLAN-Netzwerkkamera

MODE D’EMPLOI (p. 20)

Caméra à adresse IP de réseau sans fil

GEBRUIKSAANWIJZING (p. 29)

Draadloze IP-netwerkcamera

MANUALE (p. 38)

Videocamere di rete IP wi-fi

MANUAL DE USO (p. 47)

Cámara de Red IP Inalámbrica

HASZNÁLATI ÚTMUTATÓ (o. 56.)

Vezeték nélküli hálózati IP kamera

KÄYTTÖOHJE (s. 65)

Langaton IP-verkkokamera

BRUKSANVISNING (s. 74)

IP Trådlös nätverkskamera

NÁVOD K POUŽITÍ (s. 83)

IP bezdrátová síťová kamera

MANUAL DE UTILIZARE (p. 92)

Cameră video IP cu conectare wireless

ΕΓΧΕΙΡΙΔΙΟ XPHΣ ΣH (σελ. 101)

Ασύρματη κάμερα δικτύου IP

BRUGERVEJLEDNING (s. 110)

IP Trådløst netværkskamera

VEILEDNING (s. 119)

IP trådløstnettverkskamera

ENGLISH

IP Wireless Network Camera

Appearance and Interface

Notes:

y Power Indicator: It will turn RED if the equipment is powered on.

y Status Indicator: Slow flickering (once every 2 seconds) indicates that the device is searching for a

network; flickering (once or twice per second) indicates that the wired network is connected; frequent

flickering (2 to 3 times per second) indicates that the wireless network is connected.

Equipment Interface

y Power Input Socket: Connects to a DC adapter, its output should be 5 V power specification.

y RESET Button: If the RESET button is pressed and held for more than 10 seconds, the equipment will

restart and recover to the default factory settings.

y WIFI Antenna Hole: Installs the WIFI antenna.

y RJ45 Ethernet Socket: The RJ45 Ethernet socket is 10/100M self-adjusting. The equipment can connect

to all kinds of network equipment, such as hub, router, switch, etc.

NOTE: The factory setting IP is 192.168.0.178, the http port is 80, the username is admin, the

password is 123456.

y Audio Input Socket: The audio input socket is designed for connecting an external microphone. The

built-in microphone will be invalid when the external microphone is plugged in.

y Audio Output Socket: The audio output socket is for a line-out audio player, such as headphone,

speaker, etc.

y Alarm Output Socket: The alarm output socket is connected to a relay in the IP camera. The IP camera

will control the switch to trigger the alarm bell or buzzer to alarm. The relay is able to control the switch of

an alarm whose voltage is no more than 36 V and whose current is lower than 2 A. Please refer to Figure

2 for the connection of an external alarm.

Switch

Alarm

Alarm power

Output pins

Figure 2

y Alarm Input Pin: Please refer to the schematic diagram in Figure 3 for how the external detector collects

alarm information.

PIR

Switch

Input pins

PIR Power

Figure 3

The detector should be a switched type (always on or always off). If the detector has detected smoke, or

people or animals entering the area, the detector will switch on or switch off and it will send the external

alarm signal to the IP camera.

Connecting to the Network

LAN IP: 192.168.0.1

WAN IP: 202.96.82.177

Internet

ADSL

Modem

Router-1

PC-1

192.168.0.175

IP Camera-1

192.168.1.139

Home

Figure 4

Connection Instructions

Before visiting the IP Camera, connect it to the network first, supply power to it, and check if the light of the

RJ45 Socket is normal to make sure all of the communication links are fluent. The connection method is like

that of Figure 4.

Setting the IP Address

The IP addresses of the IP Camera and PC should be at the same segment. The example in Figure 5.1

shows that IP Camera-1 can’t be visited. Run BSearch_en.exe in the CD, click the Search button, and then

select IP Camera-1 to reset the IP address, as shown in Figure 5.2.

Setup Instructions:

y Carefully check the “Local PC information” on the top left corner which lists the PC configuration. If there

are several network adapters in the PC, please select the one you are using and make sure the IP

address of the IP Camera is at the same segment of the PC.

y Change the content of “IP config” on the right to make sure that the content is the same as “Local PC

information”. You only need to set the last section of the IP address, you can set it as 139 just like the

example in Figure 5.2.

y If you don’t know how to fill out the contents of “IP config”, you could also tick “Set IP

automatically” to automatically get the IP address from the router.

Produktspecifikationer

Varumärke:	Konig
Kategori:	Webbkamera
Modell:	CMP-NWIPCAM31
Typ av operation:	Buttons, Rotary
Färg på produkten:	Black, Stainless steel
Timer:	Ja
Vikt:	80000 g
Bredd:	900 mm
Djup:	600 mm
Höjd:	925 mm
Grill:	Ja
Ljudnivå:	- dB
Energie-efficiëntieklasse:	B
Belysning inuti:	Ja
Rotisserie:	Ja
Avfrostningsfunktion:	Ja
Brännare/kokzonseffekt 2:	1800 W
Brännare/kokzonseffekt 3:	3000 W
Brännare/kokzonseffekt 1:	900 W
Antal brännare/kokzoner:	- zone(s)
Typ av häll:	Gaskookplaat
Brännare/kokzon typ 1:	Klein
Brännare/kokzon typ 2:	Medium
Typ av brännare/kokzon 3:	Groot
Total inomhuskapacitet (ugnar):	110 l
Ugnens strömkälla:	Electrisch
Antal ugnar:	1
Antal gasbrännare:	5 zone(s)
Ansluten last (elektrisk):	3500 W
Energiförbrukning (konventionell):	- kWu
Energiförbrukning (tvungen konvektion):	- kWu
Ugnsstorlek:	Groot
Total ugnseffekt:	3500 W
Ugn med nettokapacitet:	110 l
Över- och undervärme:	Ja
Skriv timer:	Digitaal
Ugn med bruttokapacitet:	110 l
Typ av brännare/kokzon 4:	Extra groot
Brännare/kokzonseffekt 4:	3600 W
Ugnskraft:	3500 W
Typ produkt:	Vrijstaand fornuis