Konig KN-CP40 Bruksanvisning
Läs nedan 📖 manual på svenska för Konig KN-CP40 (42 sidor) i kategorin Kompass. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/42
MODE D'EMPLOI (p. 7)
Boussole numérique
MANUAL (p. 2)
Digital Compass
MANUALE (p. 13)
Bussola digitale
HASZNÁLATI ÚTMUTATÓ (o. 19.)
Digitális tájoló
MANUAL DE UTILIZARE (p. 30)
Busolă digitală
BRUGERVEJLEDNING (p. 36)
Digitalt kompas
BRUKSANVISNING (s. 25)
Digital kompass
NÁVOD K POUŽITÍ (s. 27)
Digitální kompas
GEBRUIKSAANWIJZING (p. 10)
Digitaal Kompas
ANLEITUNG (s. 4)
Digitalkompass
MANUAL DE USO (p. 16)
Brújula Digital
KÄYTTÖOHJE (s. 22)
Digitaalinen kompassi
ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 33)
Ψηφιακή Πυξίδα
VEILEDNING (σελ. 39)
Digitalt kompa
KN-CP40
2
ENGLISH
1. Features:
1. Four buttons: SET, COMPASS,
HISTORY, ALTI
2. Hour, minute, second display
3. 12/24 hour selectable
4. °C/°F selectable
5. Weather forecast for 4 states:
sunny, semi-sunny, cloudy, rainy
6. Indoor temperature range
(-10°C~50°C), sampling cycle:
30 seconds
7. Compass function
8. Altimeter function
9. Height unit: M/Feet selectable
10. Air pressure history record
11. Air pressure unit: hpa/mmHg/
inHg selectable
2. Power-On And Reset
When Power-On or reset, LCD full display for 3 seconds
LED light on
for 3 seconds
Normal mode
3. Button Function:
Function
Operation
SET HIST COMPASS ALTI
Standard
mode
Press Check date Check history
record
Enter
compass
mode
Altitude height
mode
Hold Enter setting
mode
―Enter
checkout
mode
Test absolute
height
Set mode Press Conrm
setting
Exit setting
mode
One step
forward
One step
forward
Hold 8 steps/―
seconds
forward
8 steps/
seconds
forward
3.1. Normal Mode Set
1. Press “SET” to toggle between time and date.
2. Hold “SET” for 2 seconds to enter setting mode.
3. Hold “SET” for 12 seconds to power off, press any button to power on.
4. When displaying altitude, press “HIST” to check height history record.
5. When displaying barometer, press “HIST” to check air pressure history
record.
6. Press “COMPASS” to enter compass mode.
7. Hold “COMPASS” to enter compass checkout mode.
8. Press “ALTI” to switch display altitude height.
9. Hold “ALTI” to test absolute height.
10. While holding “SET”, again hold “COMPASS” to enter magnetism
deflection angle setting.
11. LED light will come on if any button is pushed.
3
3.2. Setting Mode
1. In normal mode press “SET” for 2 seconds to enter setting mode.
2. There will be 1 Hz flashing during setting.
3. The sequence of settings: 12/24 hour minute year month
date
°C/°F HPA/mmHg/inHg
M/FEET.
4. Press “SET” to confirm the settings.
5. Press “ALTI” once, the setting will go ahead one step; hold the key for
2 seconds, it will run forward by 8 steps/seconds.
6. Press “COMPASS” once, the setting will go back one step; hold for
2 seconds, it will run back by 8 steps/seconds.
7. The system will exit automatically if no key is pressed for 15 seconds,
the set value will be stored.
3.3. Display Mode
1. When displaying the date, if no key is pressed for 15 seconds, it will
exit to time mode.
2. When displaying compass, it will exit automatically if no key is pressed
for 30 seconds.
3. When checking history record, it will exit automatically if no key is
impressed for 15 seconds.
3.4. Compass Mode
1. Press “COMPASS” to enter compass mode.
2. Hold “COMPASS” to enter checkout mode, at this moment place the
product horizontally, then turn it a full circle, finish the checkout, press
“COMPASS” again to exit the check out mode and enter into compass
mode, start testing direction (please follow the steps above strictly to
get correct results).
3. While holding “SET”, again hold “COMPASS” to enter into magnetism
deflection angle setting (range:+/- 90 degree), press “HIST” to exit after
finishing the settings or the menu will exit automatically after
15 seconds.
4. Make sure to keep the compass away from magnetic fields during use.
In order to enhance the accuracy, please repeat the steps of checkout
mode when changing the environment or replacing the batteries.
3.5. Altitude Mode
1. Press “ALTI” to enter testing altitude height mode (abs), in this mode
the height is measured and the display is refreshed every 5 seconds.
2. In normal mode, hold “ALTI” to enter test relative height mode (rel.),
the height will be cleared, and start testing the height from ZERO to
destination.
3. Height measure range: - 1000 feet~30000 feet (-305m~9144m),
beyond this range it will display “Err”.
3.6. Barometer Mode
1. This mode in also under normal mode, the air pressure value is
displayed for current condition, air pressure being measured every
30 seconds and the display refreshed.
2. While holding “SET”, again hold “ALTI” to enter air pressure value
correct mode.
3. Barometer measuring range: 301 hpa~1051 hpa, beyond this range it
will display “Err”.
Produktspecifikationer
| Varumärke: | Konig |
| Kategori: | Kompass |
| Modell: | KN-CP40 |
Behöver du hjälp?
Om du behöver hjälp med Konig KN-CP40 ställ en fråga nedan och andra användare kommer att svara dig
Kompass Konig Manualer
31 Augusti 2024
Kompass Manualer
Nyaste Kompass Manualer
14 Oktober 2024
25 September 2024
13 September 2024
13 September 2024
13 September 2024
13 September 2024
13 September 2024
18 Augusti 2024
9 Augusti 2024
6 Augusti 2024