Konig OSP-SX118SA Bruksanvisning

Konig Subwoofer OSP-SX118SA

Läs nedan 📖 manual på svenska för Konig OSP-SX118SA (58 sidor) i kategorin Subwoofer. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/58
OSP-SX110ta/OSP-SX112ta
OSP-SX115sa/OSP-SX118sa
MANUAL (p. 2 )
Active Speaker System 15” + 12”
ANLEITUNG (S. 6 )
Aktives Lautsprechersystem 15” + 12”
MODE D’EMPLOI (p. 10 )
Système de Haut-parleurs Actif 15” + 12”
GEBRUIKSAANWIJZING (p. 14 )
Actief luidsprekersysteem 38 en 30,5 cm (15
en 12 inch)
MANUALE (p. 18 )
Sistema casse attive 15” + 12” MANUAL DE USO (p. 22 )
Sistema de altavoces activo 15” + 12”
HASZNÁLATI ÚTMUTATÓ (o. 26. )
15” + 12”-os aktív hangszórórendszer KÄYTTÖOHJE (s. 30 )
Aktiivikaiutinjärjestelmä 15” + 12”
BRUKSANVISNING (s. 34 )
Aktivt högtalarsystem 15” + 12” NÁVOD K POUŽITÍ (s. 38 )
Systém aktivních reproduktorů 15” + 12”
MANUAL DE UTILIZARE (p. 42 )
Sistem activ de difuzoare 15” + 12” ΕΓΧΕΙΡΙ∆ΙΟ XPHΣ ΣH (σελ. 46 )
Ενεργό Σύστημα Ηχείων 15” + 12”
BRUGERVEJLEDNING (p. 50 )
Aktivt højttalersystem 15” + 12”
VEILEDNING (p. 54 )
Aktivt høyttalersystem 15” + 12”
2
ENGLISH
Active Speaker System 15” + 12”
Rear Panel Description – Top Speaker
01. Mic/line input XLR/1/4 TRS (tip-ring sleeve) input jack
02. Mic gain Adjust microphone level
03. EQ control high EQ setting for high frequencies
04. Peak indicator The peak indicator prevents the amplifier outputs from overdriving the
transducers. It lights up when the limiter is activated. It is okay for the peak
indicator to blink occasionally, but if it blinks frequently or lights up continuously,
turn down the level control.
05.Master volume This knob adjusts all signal input or mic level.
06. EQ low control EQ setting for low frequencies
07. Low cut/full range
switch
When the switch is turned off, the top speaker can be used as a full range
speaker.
08. Through
(full range output)
Male XLR-type connector that produces exactly the same signal that is connected
to the main input jack. Use it to daisy-chain several active systems of the same
signal source together.
09. Main input Female XLR-type connector that accepts a balanced line-level signal from a
mixing console or other signal source.
10. Power switch Use this switch to turn the system on and off. Make sure the signal source level
control is turned down before you turn it on.
11. Power in This is where you connect the AC line cord to provide AC power. Plug the line cord
into an AC socket properly configured for your particular model.
12. Fuse holder When a problem occurs in this system, the fuse will cut off the power. To replace,
use a standard fuse as specified.
13. Power out AC power out to top system or another active system which is equipped with
powercon-3.
3
Rear Panel Description – Sub Speaker
01. Full range input Female XLR-type connector that accepts a balanced line-level signal from a
mixing console or other signal source
02. Subwoofer level
control
Adjusts the subwoofer level. Use this as a starting point for setting the balance
between the subwoofer and the main speaker.
03. Frequency control With this control you can adjust the bass frequency from 40 Hz to 200 Hz to
balance the bass and top speakers.
04. Limit peak indicator The peak indicator prevents the amplifier outputs from overdriving the
transducers. It lights when the limiter is activated. It is okay for the peak indicator
to blink occasionally, but if it blinks frequently or lights continuously, turn down the
level control.
05. Through
(full range output)
Male XLR-type connector that produces exactly the same signal that is connected
to the main input jack. Use it to daisy-chain several active systems of the same
signal source together.
06. Power switch Use this switch to turn the system on and off. Make sure the signal source level
control is turned down before you turn it on.
07. Power in This is where you connect the AC line cord to provide AC power. Plug the line cord
into an AC socket properly configured for your particular model.
08. Fuse holder When a problem occurs in this system, the fuse will cut off the power. To replace,
use a standard fuse as specified.
09. Power out AC power out to top system or another active system which is equipped with
powercon-3.
TIPS
Do not expose electronic circuitry to moisture!
When the system is placed outdoors, be sure to protect it from rain. Keep drinks and all other liquids well
away from the cabinets to protect their electronic components from short circuits.
Ensure that the ducts on the enclosures rear panels are free of dirt and the system is properly ventilated,
otherwise electronic components may overheat and suffer damage.

Produktspecifikationer

Varumärke: Konig
Kategori: Subwoofer
Modell: OSP-SX118SA

Behöver du hjälp?

Om du behöver hjälp med Konig OSP-SX118SA ställ en fråga nedan och andra användare kommer att svara dig


Subwoofer Konig Manualer

Konig

Konig OSP-SX118SA Bruksanvisning

8 Augusti 2024

Subwoofer Manualer

Nyaste Subwoofer Manualer

Phase Technology

Phase Technology IW200-II Bruksanvisning

4 April 2025
Wet Sounds

Wet Sounds ZERO 10 S4 XZ-W Bruksanvisning

2 April 2025
SoundTube

SoundTube CM1001D Bruksanvisning

2 April 2025
JL Audio

JL Audio FS108-W5 Bruksanvisning

1 April 2025
Phase Technology

Phase Technology PL-12p Bruksanvisning

30 Mars 2025
ETON

ETON Graphit 8-2 Bruksanvisning

19 Mars 2025
ETON

ETON Graphit 8-4 Bruksanvisning

19 Mars 2025
ETON

ETON Graphit 10-4 Bruksanvisning

19 Mars 2025
ETON

ETON MW 10 FLAT Bruksanvisning

19 Mars 2025
ETON

ETON PW 8 Bruksanvisning

19 Mars 2025