Konig SAS-AHD1008 Bruksanvisning

Konig Röstinspelning SAS-AHD1008

Läs nedan 📖 manual på svenska för Konig SAS-AHD1008 (49 sidor) i kategorin Röstinspelning. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/49
Security
Sets
SAS-AHDxx
User manual
Main Board Sensor Industrial Embedded Microprocessor
Operating System Embedded LINUX operating system
Signal Support AHD, IPC, CVBS, TVI, CVI (5 in 1)
Video Coding H.264
Video Format 4CH / 8CH 1080p
Video Frame PAL: 1 - 25 FPS / NTSC: 1 - 30 FPS
Double Stream Support
Interface USB Port (2x), RS485, SATA HDD (max 8 GB), VGA, HDMI, CVBS,
BNC (4x / 8x), RCA input, RCA output
Recording Mode Automatic / Manual / Scheduled / Motion Detection / Alarm Recording
Recording Resolution Self-adaption
Playback 4CH 1080p
Playback Mode Instant / Search / Event
Backup Mode USB / Network
Protocol Support TCP/IP, UDP, PPPoE, DHCP, DDNS, NTP etc.
P2P Cloud N_EYE Pro APP / www.yunyis.com
Supported access Mobile App (iOS / Android), UTC control, 3G, WIFI
Power 12 VDC
Power Consumption < 15W (no HDD)
Operating conditions -10 - 55 °C / 10 - 90% humidity
Phyiscal 255 x 215 x 45 mm / < 1,5 KG (no HDD)
Sensor
System
Recording
Manage
Network
Power
Others
Figure Figure "A" "B"
Figure "C"
2
English
1. Connect
- Connect the cameras to the recorder with the coaxial cables using BNC connector
- Use the power splitter to power the cameras
- Connect the DVR to a TV or monitor using the preferred connector
- Connect the mouse using USB
- Connect the recorder to the internet using an Ethernet cable (if desired)
- Finally power up the recorder with the included power adapter.
2. Start Up
Press the start button and make sure the TV/monitor is set to the right input source. It will enter the real-time monitoring screen as
shown in gure : "A"
3. Navigation
Right-click anywhere to access the “Right-click menu”.
At rst attempt login is required, default username is admin, default password is 123456
Use the left mouse button to navigate through the menu, right click in the menu to go back.
4. Shutdown
- Right-click anywhere to access the “Right-click menu”, choose “Shut down system” and “Close”, or
- Long press the startup button at the front panel (not recommended as it may damage the hard disk)
5. Recovery
At sudden system power o, the recording video will be stored automatically and after reboot, the recorder will automatically
resume to the status before power o.
6. Recording
In the Record Cong menu you can set each camera’s recording schedule. By selecting the preferred recording mode and clicking
individual timeslots or dragging to set a larger timezone or to cover multiple days at once.
White means that no recording will be done in this timeslot, blue means constant recording is done and green means that
recording will only happen after motion is being detected.
After a schedule is nished, it can easily be copied to one or more cameras. See gure "B"
7. Motion detection
In right-click menu - main menu - system settings - output mode the motion detection can be enabled and dierent settings can
be set:
- 3 dierent sensitivity settings
- exact action(s) to take: Record one or more channels, take snapshot, send Email or show triggered camera fullscreen.
- Area setting (motion mask): if set only motion in the highlighted areas trigger the set action(s).
8. Playback
When watching back earlier recordings, you get the interface like gure :"C"
The 4 grey timelines at the bottom represent the 4 dierent channels. Dierently coloured areas indicate dierent types of
recording (scheduled, manual, alarm or triggered by motion detection).
Drag the timeline left or right to scroll in time, use the mouse’s scroll-wheel to zoom the timeline.
Double click on a specic time to play back the recording starting from the selected time.
9. Mobile Application
To access the DVR on your smartphone make sure the DVR is connected to the router and the network is congured correctly.
Download and open the App “N_EYE PRO”, login or register your account or use local login if you only need access from within
the local network. Add device using the plus sign and select Network Device. Scan the QR-tag shown at the DVR under P2P Cloud
or copy the requested network parameters. The App can automatically detect the number of cameras on this DVR. After saving you
will see all cameras added. On the top-right corner specic cameras can be switched on and o. Other options in the App include
playback and manual recording on smartphone.
3

Produktspecifikationer

Varumärke: Konig
Kategori: Röstinspelning
Modell: SAS-AHD1008

Behöver du hjälp?

Om du behöver hjälp med Konig SAS-AHD1008 ställ en fråga nedan och andra användare kommer att svara dig


Röstinspelning Konig Manualer

Konig

Konig SEC-DVR408 Bruksanvisning

27 Augusti 2024
Konig

Konig SAS-AHD1008 Bruksanvisning

22 Augusti 2024
Konig

Konig DMR-STICK6 Bruksanvisning

17 Augusti 2024
Konig

Konig SEC-DVRPEN11 Bruksanvisning

5 Augusti 2024

Röstinspelning Manualer

Nyaste Röstinspelning Manualer

Irradio

Irradio VR 602M Bruksanvisning

5 Mars 2025
Hikvision

Hikvision DVR-204G-K1 Bruksanvisning

31 December 2025
M-Audio

M-Audio Fast Track C400 Bruksanvisning

30 December 2025
Philips

Philips Voice Tracer LFH0662 Bruksanvisning

27 December 2024
Philips

Philips SpeechMike Air LFH3025 Bruksanvisning

22 December 2024
M-Audio

M-Audio Fast Track C600 Bruksanvisning

16 December 2024
Yamaha

Yamaha PockeTrak C24 Bruksanvisning

15 December 2024
Philips

Philips SpeechMike Premium Air SMP4000 Bruksanvisning

24 Oktober 2024
Philips

Philips Pocket Memo LFH9370 Bruksanvisning

24 Oktober 2024
Philips

Philips SpeechAir PSP2000 Bruksanvisning

24 Oktober 2024