Kramer VM-10H2 Bruksanvisning

Kramer mottagare VM-10H2

Läs nedan 📖 manual på svenska för Kramer VM-10H2 (29 sidor) i kategorin mottagare. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/29
P/N: 2900-300619 Rev 1 www.kramerAV.com
USER MANUAL
MODEL:
VM-10H2
4K HDMI 2.0 1:10 DA
Kramer Electronics Ltd.
VM-10H2 Contents
i
Contents
Introduction 1
Getting Started 1
Overview 2
Typical Applications 3
Controlling Your VM-10H2 3
Firmware Update 3
Defining the VM-10H2 4K HDMI 2.0 1:10 DA 4
Mounting VM-10H2 5
Connecting the VM-10H2 6
Connecting to VM-10H2 via RS-232 6
Operating the VM-10H2 7
Setting the DIP-Switches 7
Acquiring and Setting the Current EDID 8
Default EDID 9
Technical Specifications 11
Default Communication Parameters 11
Protocol 3000 12
Understanding Protocol 3000 13
Kramer Protocol 3000 Syntax 14
Protocol 3000 Commands 15
Kramer Electronics Ltd.
VM-10H2 Introduction
1
Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world
of unique, creative, and affordable solutions to the vast range of problems that confront the
video, audio, presentation, and broadcasting professional a daily basis. In recent years, we on
have redesigned and upgraded most of our line, making the best even better!
Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging materials for
possible future shipment.
Review the contents of this user manual.
Go to www.kramerav.com/downloads/VM-10H2 to check for up-to-date user manuals,
application programs, and to check if firmware upgrades are available (where appropriate).
Achieving the Best Performance
For optimum range and performance, use the recommended Kramer cables available
at www.kramerav.com/product/VM-10H2.
Do not secure the cables in tight bundles or roll the slack into tight coils.
Avoid interference from neighboring electrical appliances that may adversely influence
signal quality.
Position your Kramer away from moisture, excessive sunlight and dust. VM-10H2
This equipment is to be used only inside a building. It may only be connected to other
equipment that is installed inside a building.
Safety Instructions
Caution:
This equipment is to be used only inside a building. It may only be connected to other
equipment that is installed inside a building.
For products with relay terminals and GPI\O ports, please refer to the permitted rating
for an external connection, located next to the terminal or in the User Manual.
There are no operator serviceable parts inside the unit.
Warning:
Use only the power cord that is supplied with the unit.
Disconnect the power and unplug the unit from the wall before installing.
Do not open the unit. High voltages can cause electrical shock! Servicing by qualified
personnel only.
To ensure continuous risk protection, replace fuses only according to the rating
specified on the product label which located on the bottom of the unit.

Produktspecifikationer

Varumärke: Kramer
Kategori: mottagare
Modell: VM-10H2

Behöver du hjälp?

Om du behöver hjälp med Kramer VM-10H2 ställ en fråga nedan och andra användare kommer att svara dig




mottagare Kramer Manualer

mottagare Manualer

Nyaste mottagare Manualer