Kress KUB30.9 Bruksanvisning
Kress
Skruvmaskin
KUB30.9
Läs nedan 📖 manual på svenska för Kress KUB30.9 (12 sidor) i kategorin Skruvmaskin. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/12
SAFETY AND OPERATING MANUAL
Lithium-Ion Brushless Impact Wrench
KUB30 KUB30.2 KUB30.9
MAINTENANCE
Remove the battery pack from the machine
before carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or
maintenance. Never use water or chemical cleaners to
clean your power tool. Wipe it with a dry cloth. Wipe
clean with a dry cloth. Always store your power tool
in a dry place. Keep the motor ventilation slots clean.
Keep all working controls free of dust.
FOR BATTERY TOOLS
The ambient temperature range for the use and stor-
age of tool and battery is 0°C-45°C.
The recommended ambient temperature range for the
charging system during charging is 0°C-40°C.
Positec Australia Pty Limited
10 Corporate Blvd Bayswater, VIC 3153, Australia
Lithium-Ion Brushless Impact Wrench
KUB30 KUB30.2 KUB30.9
3
PRODUCT SAFETY
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may result
in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
h) Do not let familiarity gained from
frequent use of tools allow you to become
complacent and ignore tool safety
principles. A careless action can cause severe
injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better and
safer at the rate for which it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
Produktspecifikationer
| Varumärke: | Kress |
| Kategori: | Skruvmaskin |
| Modell: | KUB30.9 |
Behöver du hjälp?
Om du behöver hjälp med Kress KUB30.9 ställ en fråga nedan och andra användare kommer att svara dig
Skruvmaskin Kress Manualer
14 September 2024
13 September 2024
Skruvmaskin Manualer
- Skruvmaskin Bosch
- Skruvmaskin AEG
- Skruvmaskin DeWalt
- Skruvmaskin Silverline
- Skruvmaskin Ferm
- Skruvmaskin Ozito
- Skruvmaskin Gude
- Skruvmaskin Makita
- Skruvmaskin Black And Decker
- Skruvmaskin Vonroc
- Skruvmaskin Stanley
- Skruvmaskin Skil
- Skruvmaskin Yato
- Skruvmaskin Hilti
- Skruvmaskin Ryobi
- Skruvmaskin Festool
- Skruvmaskin Metabo
- Skruvmaskin Parkside
- Skruvmaskin Worx
- Skruvmaskin Meec Tools
- Skruvmaskin Milwaukee
- Skruvmaskin Hikoki
- Skruvmaskin Tacklife
- Skruvmaskin Hazet
- Skruvmaskin Einhell
- Skruvmaskin Maktec
- Skruvmaskin Steren
- Skruvmaskin Craftsman
- Skruvmaskin Power Craft
- Skruvmaskin Powerplus
- Skruvmaskin Porter-Cable
- Skruvmaskin Cotech
- Skruvmaskin Beta
- Skruvmaskin Kraftwerk
- Skruvmaskin Powerfix
- Skruvmaskin Matrix
- Skruvmaskin Fieldmann
- Skruvmaskin Basetech
- Skruvmaskin Laserliner
- Skruvmaskin Truper
- Skruvmaskin Cocraft
- Skruvmaskin Meister Craft
- Skruvmaskin Toolcraft
- Skruvmaskin Batavia
- Skruvmaskin Fein
- Skruvmaskin Park Tool
- Skruvmaskin Elu
- Skruvmaskin Goon
- Skruvmaskin Sthor
- Skruvmaskin Wiha
- Skruvmaskin Alpha Tools
- Skruvmaskin SW-Stahl
- Skruvmaskin Cleco
- Skruvmaskin MSW
- Skruvmaskin Weidmüller
- Skruvmaskin Einhell Bavaria
- Skruvmaskin Wera
- Skruvmaskin Rodcraft
- Skruvmaskin Ingersoll Rand
- Skruvmaskin Bavaria By Einhell
- Skruvmaskin Chicago Pneumatic
- Skruvmaskin Facom
- Skruvmaskin TAURUS Titanium
Nyaste Skruvmaskin Manualer
27 Oktober 2024
24 Oktober 2024
20 Oktober 2024
18 Oktober 2024
17 Oktober 2024
15 Oktober 2024
12 Oktober 2024
10 Oktober 2024
7 Oktober 2024
5 Oktober 2024