Kuassa A360 Bruksanvisning

Kuassa Programvara för ljud A360

Läs nedan 📖 manual på svenska för Kuassa A360 (76 sidor) i kategorin Programvara för ljud. Denna guide var användbar för 15 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/76
Thank you for choosing a product from Kuassa!
A wrapper, integrator, a host, or just lets say it’s a
playground for guitarist. Mix, integrate, explore and
perform with Kuassa Amplikations and Efektors you
own, automatically added as building blocks inside
Amplikation 360.
YOUR EXPERIENCE WITH AMPLIFIKATIONS AND
EFEKTORS JUST GET BETTER
Amplikation 360 is a modular “playground” for
stacking pedals, amps, and cabs to create the perfect
sound you want. Immediately combine every Kuassa
guitar plug-ins you own inside Amplikation 360. Try
routing Matchlock‘s Amp with Caliburn‘s Cabinet,
add a series (and parallel routings) of Efektor pedals to
get that spacey shoegazing wall of sound, bigger than
live djent riffs, or even a trippy psychedelic leads.
Amplikation 360 is the answer for a fast patch design,
thanks to its uniquely intuitive, single screen graphic
interface. Amplikation 360 is also among the very few
guitar amp sims which are really enjoyable to bring on
a live performance. Create preset within minutes, plug
any midi pedal controller and set the midi channels
quickly and use “Live” mode to quickly switch scenes
smoothly without glitch/popping.
Amplikation 360 is a PLAYGROUND for our existing
users, our fans to unify and heighten your already great
experience to a new level with our products.
Mac OSX 10.11 or later
Note for MacOS X users: you will be asked for your password upon installation.
For Mac installer(.pkg) format, double-click the installer and follow the instructions. The installer automatically poin to your
Mac’s default VST/VST3/AU/AAX plug-ins and Standalone path (see below). Alternatively you can customize the installation
target to specic folder.
Here are the default folders installation path for each of our supported platforms in Mac OSX:
• Mac Audio Unit (Amplikation360.component) : /Library/Audio/Plug-Ins/Components/
• Mac VST (Amplikation360.vst) : /Library/Audio/Plug-Ins/VST/Kuassa/
• Mac VST3 (Amplikation360.vst3) : /Library/Audio/Plug-Ins/VST3/
• Mac AAX (Amplikation360.aaxplugin) : /Library/Application Support/Avid/Audio/Plug-Ins/
• Mac Standalone (Amplikation360.app) : /Applications/Kuassa/
Windows VISTA or later
For Windows Installer (.exe), double-click the installer and follow the instructions. The installer automatically points to your
system's default plugins path (see below). Alternatively you can point the installation target to specic folder. Most VST
host already have a “Plugins” or “VSTplugins” folder inside its installation directory, or you can point the host to read any
folder you choose.
Here are the default folders installation path for each of our supported platforms:
• Windows 64-bit VST (Amplikation360.dll) : C:\Program Files\Steinberg\VstPlugins\Kuassa
• Windows 64-bit VST3 (Amplikation360.vst3) : C:\Program Files\Common Files\VST3
• Windows 64-bit AAX (Amplikation360.aaxplugin) : C:\Program Files\Common Files\Avid\Audio\Plug-Ins
• Windows 64-bit Standalone (Amplikation360.exe) : C:\Program Files\Kuassa
Mac OSX 10.11 or later
On a Mac, simply delete the plug-in located on the corresponding Plug-ins folder, and delete other folders and le resources
located at,
Folders:
• /Library/Application Support/Kuassa/Libraries/Cabinets/
• /Library/Application Support/Kuassa/Libraries/LookUpTables/
• /Library/Application Support/Kuassa/Default Presets/Amplikation360/
• /Users/[User Name]/Music/Kuassa/Presets/Amplikation360/
Files:
• /Library/Application Support/Kuassa/Misc/Amplikation360 EULA.txt
• /Library/Application Support/Kuassa/User Manuals/Amplikation360 Manual.pdf
• /Users/[User Name]/Music/Kuassa/Settings/Amplikation360.setting
• /Users/[User Name]/Library/Application Support/Kuassa/Amplikation360.settings
Windows VISTA or Later
Use “Add/Remove programs” or “Programs and Features” from the Windows Control Panel. If Amplikation 360 does not
listed, delete the .dll/.vst3/.aaxplugin le from your VST plug-in folder. After Uninstallation, manually delete other Amplikation
360 le resources at,
Folder:
• C:\Users\[User Name]\Documents\Kuassa\Presets\Amplikation360\
Files:
• C:\Users\[User Name]\Documents\Kuassa\Settings\Amplikation360.setting
• C:\Users\[User Name]\AppData\Roaming\Kuassa\Amplikation360.settings
1On demo mode, you will
see this demo label
when you rst start the module.
2To start the authorization
process, click the [File] button
on the Global Panel
, there, you will nd
a selection box titled “Register
Product...”
3Locate the License File.
You can import multiple licenses at once.
5If your authorization is successful, demo label
will disappear. You will also notice that the
generated noise on the demo version of
module is now gone.
4After you locate the License File, a pop-up
box conrming that you are successfully
authorize your plug-in will show.
GLOBAL PANEL
2
5
6
7 8 91 10 12 13 1411
3 4
TUNING FORK: Click to show or hide the Tuner interface.
KUASSA LOGO : Clicking on the logo will show the About box.
TUNING PITCH: Sets center tuning frequency.
TUNER DISPLAY: Shows the accuracy of the tuner. Tune your instrument until the needle sits on the center.
TUNER MUTE: Mutes the output sound.
TUNER NOTE DISPLAY: Shows the tuner’s exact note in cents.
INPUT KNOB: Sets the input level from your interface.
INPUT SELECTOR AND METER: Click to select the active input channel from your interface. Input level will be displayed on the meter bars.
FILE BUTTON: Click to see options for Preset Management, Lock Input Channel, Lock Midi Address, Interface view, Register Product and opens up
User Manual.
PRESET DISPLAY: Displays current active preset. Use the small up/down arrow to select next/previous preset.
TEMPO AND BPM SYNC: Sets the tempo manually, or sync with the host’s tempo.
OUTPUT LIMITER: Enable or disable the output limiter function. This will compress the sound to prevent overloading.
OUTPUT KNOB: Adjusts the overall output volume from the entire chain.
POWER BUTTON : Turns on or off the whole effect chain.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
GLOBAL PANEL Functions:
MODULE LIST VIEW
MODULE SELECTOR: Select the type of modules to use.
MODULE DISPLAY: Displays the current available modules from the selected type.
MODULE DESCRIPTION: Short description of the module.
You can change position or hide the panel by clicking
on the File button > Module List View.
1.
2.
3.
MODULE LIST VIEW Functions:
21
1
2
3
3
PLAYGROUND AREA
PLAYGROUND AREA: This is your working area. Drag and drop modules from the Module Display to this space, or right click to select a module from
the cascading menu. To remove unused modules, drag and drop it back to the upper menu bar or to the Module Display area.
A360 MODULES: Modules in use will be shown here. Modules can be moved, rearranged, and removed by dragging and dropping. Right clicking
on the module will also show options for adding, replacing, or removing modules.
1.
2.
PLAYGROUND AREA Functions:
2 2
1
POWER SWITCH: Turns the amp On or Bypass.
CHANNEL: Select between Clean and Lead channel
GAIN: Sets the input level & the amount of distortion. Rotate clockwise for more
distortion.
LOW: Adjusts the low frequency tone.
MID: Adjusts the middle frequency tone.
HIGH: Adjusts the high frequency tone.
PRESENCE: Adjusts the presence level of the amp.
VOLUME: Adjusts the output level from this amplier.
PREFS BUTTON: Shows oversampling option.
OVERSAMPLING: Increases the internal sampling frequency to reduce aliasing
artefacts at the cost of higher CPU usage.
For a more detailed information, please refer to Amplikation Vermilion Manual.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Parameter Functions:
Vermilion A: Tube amp, warm, thick overdrive,
dynamic.
Vermilion B: Solid state, mellow, crunchy. Vermilion C: Clean, Sparkling, tight.
VERMILION TYPES :
25 6 7 8
9
1
10
3 4
POWER SWITCH: Turns the amp On or Bypass.
CHANNEL: Select between Clean and Lead channel.
GAIN: Sets the input gain and the amount of distortion. Rotate clockwise for
more distortion.
LOW: Adjusts the low frequency tone.
MID: Adjusts the middle frequency tone.
HIGH: Adjusts the high frequency tone.
PRESENCE: Adjusts the presence level of the amp.
BIAS: Sets the operating voltage of the power amplier section.
SAG: Controls the amount of dropout/compression when a large signal and fast
transient hits the power amp section.
MASTER: Adjusts the output level from the amplier.
PREFS BUTTON: Shows oversampling option.
OVERSAMPLING: Increases the internal sampling frequency to reduce aliasing
artefacts at the cost of higher CPU usage.
For a more detailed information, please refer to Amplikation Caliburn Manual.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Parameter Functions:
Caliburn A: Big, crunchy, and chimey. Caliburn B: Bold, fat, but still clear. Caliburn C: Heavy and dirty with long sustain.
CALIBURN TYPES :
2
567
8
9
1 10
11
12
3 4
POWER SWITCH: Turns the amp On or Bypass.
CHANNEL : Select between Clean and Boosted channel.
LOW : Adjusts the low frequency tone.
MID : Adjusts the middle frequency tone.
HIGH : Adjusts the high frequency tone.
VOLUME: Adjusts the output level from the amplier.
BRIGHT: Adds extra brightness.
BIAS : Sets the operating voltage of the power amplier section.
SAG : Controls the amount of dropout/compression when a large signal and fast
transient hits the power amp section.
PREFS BUTTON: Shows oversampling option.
OVERSAMPLING : Increases the internal sampling frequency to reduce aliasing
artefacts at the cost of higher CPU usage.
For a more detailed information, please refer to Amplikation Matchlock Manual.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Parameter Functions:
Matchlock A: Crystal clear, spanky, and bright
clean tone.
Matchlock B: Probably the most used amp for
the blues.
Matchlock C: Bell-like clean tones. Articulate,
punchy, and slightly compressed.
MATCHLOCK TYPES :
2
5 6
7
8
9
1
10
11
3 4
Clarent A: Thick and clean. A powerful choice
for playing with effect pedals.
Clarent B: Meaty and crunchy. Delivers
punchy, mid-forward distortion on channel 2.
Clarent C: Modern high gain type sound.
Pushing massive distortion with long sustain.
CLARENT TYPES :
2
5 6 7
8
9
1
10
3 4
11
POWER SWITCH: Turns the amp On or Bypass.
CHANNEL : Select between Low Gain and High Gain channel.
GAIN: Sets the input gain and the amount of distortion. Rotate clockwise for more
distortion.
LOW : Adjusts the low frequency tone.
MID : Adjusts the middle frequency tone.
HIGH : Adjusts the high frequency tone.
MASTER: Adjusts the output level from the amplier.
BIAS : Sets the operating voltage of the power amplier section.
SAG : Controls the amount of dropout/compression when a large signal and fast
transient hits the power amp section.
PREFS BUTTON: Shows oversampling option.
OVERSAMPLING : Increases the internal sampling frequency to reduce aliasing
artefacts at the cost of higher CPU usage.
For a more detailed information, please refer to Amplikation Clarent Manual.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Parameter Functions:
Lancaster A: Breaks up and overdrives early.
Raw and raucous.
Lancaster B: Fat and slightly compressed.
Sounds thick with overdrive or distortion.
Lancaster C: Cleaner sound with huge head-
room, instantly recognizable for that loud
jangly tone.
Lancaster TYPES :
2 5 6 7
8
9
1
10
3 4
11
POWER SWITCH: Turns the amp On or Bypass.
NORMAL VOLUME : Sets the input gain of the Normal Channel. This goes straight
into the Top Boost channel, stacks with the TB Volume/Gain control.
TOP BOOST VOLUME : Sets the input gain of the Top Boost Channel. You can use
the Normal Channel volume/gain to drive this one.
LOW : Adjusts the low frequency amount for the top boost channel.
HIGH : Adjusts the high frequency amount for the top boost channel.
TONE CUT : Adjusts the high pass frequency.
MASTER : Adjusts the output level from the amplier.
BIAS : Sets the operating voltage of the tubes inside the amp.
SAG : Controls the amount of dropout/compression when a large signal and fast
transient hits the power amp section.
PREFS BUTTON: Shows oversampling option.
OVERSAMPLING : Increases the internal sampling frequency to reduce aliasing
artefacts at the cost of higher CPU usage.
For a more detailed information, please refer to Amplikation Lancaster Manual.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Parameter Functions:
Rectifor A: Low gain. Clean and pristine
sound. Covers a wide frequency spectrum.
Rectifor B: : Vintage tone. Raw, expressive,
and crunchy. Very musical saturation.
Rectifor C: Aggressive high gain sound. Dark,
thick, tight, and responsive.
Rectifor TYPES :
POWER SWITCH: Turns the amp On or Bypass.
GAIN: Sets the input gain and the amount of distortion. Rotate clockwise for more
distortion.
LOW : Adjusts the low frequency tone.
MID : Adjusts the mid frequency tone.
HIGH : Adjusts the high frequency tone.
PRESENCE: Adjusts the presence level of the amp.
MASTER : Adjusts the output level from the amplier.
BIAS : Sets the operating voltage of the tubes inside the amp.
SAG : Controls the amount of dropout/compression when a large signal and fast
transient hits the power amp section.
PREFS BUTTON: Shows oversampling option.
OVERSAMPLING : Increases the internal sampling frequency to reduce aliasing
artefacts at the cost of higher CPU usage.
For a more detailed information, please refer to Amplikation VVV Manual.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Parameter Functions:
2 5 6 7
8
9
1
10
3 4
11
2 5 6 87
13 4
VVV A:
Mark I, Beautiful and rich clean
channel. Tight Lead Channel with 80s
avor.
VVV B:
Mark II, Thick and full
midrange with tight low end that
delivers the famous brown sound.
VVV C:
Mark III: Deep and aggressive
with monstrous gain that will please all
metalheads.
VVV TYPES :
POWER SWITCH: Turns the amp On or Bypass.
GAIN: Sets the input gain and the amount of distortion. Rotate clockwise for more
distortion.
LOW : Adjusts the low frequency tone.
MID : Adjusts the mid frequency tone.
HIGH : Adjusts the high frequency tone.
PRESENCE: Adjusts the presence level of the amp.
RESO: Adjusts the resonance level of the amp.
MASTER : Adjusts the output level from the amplier.
BIAS : Sets the operating voltage of the tubes inside the amp.
SAG : Controls the amount of dropout/compression when a large signal and fast
transient hits the power amp section.
PREFS BUTTON: Shows oversampling option.
OVERSAMPLING : Increases the internal sampling frequency to reduce aliasing
artefacts at the cost of higher CPU usage.
For a more detailed information, please refer to Amplikation VVV Manual.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Parameter Functions:
9
10
11
12
POWER SWITCH: Turns the amp On or Bypass.
GAIN: Sets the input level & the amount of saturation. Rotate clockwise for more
distortion.
COMPRESS: Compress the dynamics of input signal. Variable ratio.
COMPRESS ON/OFF Button.
CONTOUR: Cuts the mid-range frequencies while boosting lows & highs.
LOW: Adjusts the low frequency, +/- 10 db.
BOOST LOW: Adds more low frequency content.
LO MID: Adjusts the low mid frequency, +/- 10 db.
100-1K FREQ SELECT: Select frequency between 100-1K Hz for the Low Mid
Frequency Knob.
HI MID: Adjusts the high mid frequency, +/- 10 db.
500-5K FREQ SELECT: Select frequency between 500-5K Hz for the High Mid
Frequency Knob.
HIGH: Adjusts the high frequency, +/- 10 db.
BOOST HIGH: Adds more high frequency content.
MASTER: Adjusts the output level from the amplier.
PREFS BUTTON: Shows oversampling option.
OVERSAMPLING: Increases the internal sampling frequency to reduce aliasing
artefacts at the cost of higher CPU usage.
For a more detailed information, please refer to Cerberus Bass Amp Manual.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Parameter Functions:
Cerberus Valve: Tube avored. Warm, mellow,
slightly compressed.
Cerberus Fet: Solid-state powered. Thick,
punchy, dynamic.
Cerberus Drive: Overdriven, from mild drive to
gritty fuzz.
CERBERUS TYPES :
2
5
6
7
8
9
1
10 12
14
15
13
11
16
3
4
For a more detailed information, please refer to
Pillar Power Amp
Manual.
Pillar Power Amp : Simple tube driven power amp simulator.
Parameter Functions:
1
5
6
2
3 4
1. VOLUME: Adjusts the overall output level.
2. ATTEN.: Output level attenuator.
3. PREFS BUTTON: Shows input, Dry/wet, and oversampling option.
4. BYPASS SWITCH: Turns the effect on or off.
5. INPUT BOOST : Adjust the level of input signal.
6. OVERSAMPLING : Select from no oversampling up to 8X oversampling.
Parameter Functions:
Amplikation Lite’s DSP engine is based on one
of the amps featured in Kuassa Amplikation
One with a xed tonestack and power amp
output type.
LITE TYPES :
25 6 7 8
9
1
10
3 4
POWER SWITCH: Turns the amp On or Bypass.
CHANNEL: Select between Clean, Rhythm, and Lead channel.
GAIN: Sets the input level & the amount of distortion. Rotate clockwise for more
distortion.
LOW: Adjusts the low frequency tone.
MID: Adjusts the middle frequency tone.
HIGH: Adjusts the high frequency tone.
PRESENCE: Adjusts the presence level of the amp.
MASTER: Adjusts the output level from the amplier.
PREFS BUTTON: Shows oversampling option.
OVERSAMPLING: Increases the internal sampling frequency to reduce aliasing
artefacts at the cost of higher CPU usage.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
POWER BUTTON: Turns the Cabinet Modeler completely On or Bypass.
CABINET ON/OFF BUTTON: Enables or disables the particular cabinet.
CABINET SELECTOR: Choose models of speaker cabinets.
MIC ANGLE: Switches between straight or angled miking.
MIC SELECTOR: Provides microphone to use.
MONO/STEREO SELECTOR: Use this to toggle between mono or stereo
cabinet modes.
PHASE BUTTON: Inverts the waveform polarity.
PHASE DELAY: Delays the cabinet impulse response. Maximum is 1 ms.
MIC POSITION: Indicates the position of the microphone. Move it
freely with your mouse. Double-click to reset to center position.
CABINET VOLUME SLIDER: To adjust the volume of the corresponding
cabinet. Parameter only shown in stereo mode.
CABINET PAN ( Mode): To adjust the panning position of the corre-
sponding cabinet. Parameter only shown in stereo mode.
CABINET MIX BALANCE ( Mode): Adjusts mix volume balance
between the left and right cabinets. Double-click on the slider to reset
to center position.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Parameter Functions:
Cabinet Modeler: Contains
all cabinets and mics from
every Amplikation Series
available
Metal US (4x12)
Modern US (4x12)
Modern British (4x12)
Vintage British (4x12)
Standard British (4x12)
Black Tolex (2x12)
Red Tolex (1x12)
Blonde Vintage (1x10)
Iron Grill (1x10)
Cloth Grill (1x8)
Lead British (4x12)
Classic British (4x12)
Reissue British (4x12)
Custom G12 (4x12)
Custom V30 (4x12)
Concerto (1x12)
Black Deluxe (1x12)
Hot-Rodded (1x12)
Black Twin (2x12)
Tweed Bass (4x10)
Crush Cube (1x8)
Single Rocker (1x12)
Dual Rocker (2x12)
Metal Rocker (2x12)
Heavy Duty (4x12)
Pathwalker (1x8)
Heritage (1x12)
AC Tone (2x12)
Full Range (2 x12)
NT Tone (2 x12)
Hybrid (2x12)
Roadster (2x12)
Lone King (4x10)
Closed Back (4x12)
Half Back (4x12)
Shefeld (1x12)
Combo Fifty (2x12)
Oversized Fifty (2x12)
Heavy Fifty (4x12)
Heavy Ultra (4x12)
Pillar 1x12
Pillar 4x12
PIllar Bass
D.I (Bass)
German (1x12) (Bass)
California (4x10) (Bass)
Classic USA (8x10) (Bass)
Creme
Creme
Creme
Creme
Creme
Vermilion
Vermilion
Vermilion
Vermilion
Vermilion
Caliburn
Caliburn
Caliburn
Caliburn
Caliburn
Matchlock
Matchlock
Matchlock
Matchlock
Matchlock
Clarent
Clarent
Clarent
Clarent
Clarent
Lancaster
Lancaster
Lancaster
Lancaster
Lancaster
Rectifor
Rectifor
Rectifor
Rectifor
Rectifor
VVV
VVV
VVV
VVV
VVV
Pillar
Pillar
Pillar
Cerberus
Cerberus
Cerberus
Cerberus
CABINET TYPES : AMP :
2
5
6
7
8
9
1
10
12
11
3
4

Produktspecifikationer

Varumärke: Kuassa
Kategori: Programvara för ljud
Modell: A360

Behöver du hjälp?

Om du behöver hjälp med Kuassa A360 ställ en fråga nedan och andra användare kommer att svara dig


Programvara för ljud Kuassa Manualer

Kuassa

Kuassa Efektor Harmo Nitron Bruksanvisning

21 September 2024
Kuassa

Kuassa Efektor Whammo Bruksanvisning

21 September 2024
Kuassa

Kuassa Kratos Maximizer 2 Bruksanvisning

20 September 2024
Kuassa

Kuassa Creme Bruksanvisning

20 September 2024
Kuassa

Kuassa A360 Bruksanvisning

20 September 2024
Kuassa

Kuassa Efektor TR3604 Tremolo Bruksanvisning

20 September 2024
Kuassa

Kuassa Lancaster Bruksanvisning

20 September 2024
Kuassa

Kuassa EVE-MP5 Bruksanvisning

20 September 2024

Programvara för ljud Manualer

Nyaste Programvara för ljud Manualer

Eventide

Eventide DeBoom Bruksanvisning

12 Mars 2025
Modalics

Modalics Time Oddity Chorus Bruksanvisning

29 Januari 2025
Minimal Audio

Minimal Audio Cluster Delay Bruksanvisning

29 Januari 2025
Minimal Audio

Minimal Audio Rift Bruksanvisning

29 Januari 2025
Air

Air Flex Beat Bruksanvisning

28 Januari 2025
MeldaProduction

MeldaProduction MGuitarArchitect Bruksanvisning

28 Januari 2025
Audio Ease

Audio Ease Altiverb 8 Bruksanvisning

27 Januari 2025
Waves

Waves DeEsser Bruksanvisning

16 Januari 2025
Waves

Waves Clavinet Bruksanvisning

16 Januari 2025
Waves

Waves CLA Unplugged Bruksanvisning

16 Januari 2025