La Crosse Technology WS-9057U-IT Bruksanvisning

La Crosse Technology Väderstation WS-9057U-IT

Läs nedan 📖 manual på svenska för La Crosse Technology WS-9057U-IT (11 sidor) i kategorin Väderstation. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/11

Weather Station

Model WS-9057U

Instruction Manual

INSTANT TRANSMISSION is the state-o

the-art new wireless transmission

technology, exclusively designed and

developed by LA CROSSE

TECHNOLOGY. INSTANT

TRANSMISSION offers you an

immediate update (every 4 seconds!) of

all your outdoor data measured from the

transmitters: follow your climatic

variations in real-time!

This product offers:

Foldable

Stands

LCD

Displa

Function Keys

INVENTORY OF CONTENTS

1. Wireless Weather Station

2. Thermo/hygro transmitter (TX29UD-TH-IT)

3. Instruction manual

FEATURES:

The Weather Station

Battery

Compartment

Wall Mount

 WWVB Radio controlled time with manual setting option

 Time reception ON/OFF (user selectable)

 12/24 hour time display

 Time zone option ±12 hours

 Daylight saving time (DST On/Off)

 Weekday and day calendar display (year and month only in setting

mode)

 Alarm setting with snooze function

 Display 12 Moon phases throughout the year

 Weather forecasting with weather tendency indicator

 Indoor comfort indicator

 Temperature display in °F/°C

 Indoor and outdoor temperature display with MIN/MAX records and

time of reception

 Humidity data display as RH%

 Indoor and outdoor humidity display with MIN/MAX records

 Relative air pressure hPa/ inHg with adjustable reference value

 Weather icon sensitivity setting

 Relative air pressure history for the past 24 hours (electronic

barometer with barometric pressure trend)

 LCD contrast selectable

 Can receive up to 3 outdoor transmitters

 Wireless transmission at 915 MHz

 Signal reception intervals at 4 seconds

 Low battery indicator

 Table standing or wall mounting



Thermo-Hygro Transmitter

 Remote transmission of outdoor

temperature and humidity to weather station

by 915 MHz signals

 Alternate display of temperature and

humidity display

 Water-resistant casing

 Wall mounting case. (Mount in a sheltered

place. Avoid direct rain and sunshine

SETUP

WHEN ONE TRANSMITTER IS USED

1. First, insert the batteries in the transmitter (see “How to install and

replace batteries in the Thermo-hygro outdoor transmitter” on

page 11).

2. Within 2 minutes of powering up the transmitter, insert the batteries

in the Weather Station (see “How to install and replace batteries

in the Weather Station” on pages 11-12). Once the batteries are

in place, all segments of the LCD will light up briefly and a short

signal tone will sound. Following the indoor temperature/humidity

and the time, as 12:00 will be displayed. If this information is not

displayed on the LCD after 60 seconds, remove the batteries and

wait for at least 60 seconds before reinserting them. Once the

indoor data is displayed user may proceed to the next step.

3. After the batteries are inserted, the Weather station will start

receiving data signal from the transmitter. The outdoor temperature

and humidity data should then be displayed on

the Weather station.

If this does not happen after 2 minutes, the batteries will need to be

removed from both units and reset from step 1.

4. The distance between the Weather Station and the transmitter

should not be more than 300 feet to ensure sufficient 915 MHz

transmission. (see notes on “Positioning” and “915 MHz

Reception”).

Note: In the event of changing batteries of the units, ensure the batteries

do not spring free from the contacts. Always wait at least 1 minute after

removing the batteries before reinserting, otherwise start up and

transmission problems may occur.

WHEN MORE THAN ONE TRANSMITTER IS USED

1. User shall remove all the batteries from the Weather Station and

transmitters, and wait 60 seconds.

2. Insert the batteries in the first transmitter.

3. Within 2 minutes of powering up the first transmitter, insert the

batteries in the Weather Station. Once the batteries are in

place, all

segments of the LCD will light up briefly and a short signal tine will

sound. Following the indoor temperature/humidity and the time as

12:00 will be displayed. If this information is not displayed on the

LCD after 60 seconds, remove the batteries from both units and

wait for at least 60 seconds before reinserting them.

4. The outdoor temperature and humidity data from the first

transmitter (channel 1) and the signal reception icon should be

displayed on the Weather Station. If this does not happen after 2

minutes, the batteries will need to be removed from both units and

reset from step 1.

5. Insert the batteries in the second transmitter as soon as the signal

reception icon and outdoor data are displayed on the Weather

Station. Then within 2 minutes, the channel 2 outdoor data from the

second transmitter and the "channel 2" icon should be displayed on

the Weather Station. If this does not happen after 2 minutes, the

batteries will need to be removed from all the units and reset from

step 1.

Note : User shall insert the batteries into the second transmitter

within 45 seconds after the Weather Station displays the

information of the first transmitter.

6. Insert the batteries in the third transmitter as soon as the "channel

2" icon and outdoor data are displayed on the Weather Station.

Then within 2 minutes, the channel 3 outdoor data from the third

transmitter will be displayed and the channel icon will shift back to

"1" once the third transmitter is successfully received. If this is not

happen, user shall restart the setting up from step 1.

Note : User shall insert the batteries into the third transmitter within

45 seconds after the Weather Station displays the information of

the first transmitter. Or immediately after reception of the second

transmitter is finished.

7. The distance between the Weather Station and the transmitter

should not be more than 300 feet to ensure sufficient 915 MHz

transmission. (see notes on “Positioning” and “915 MHz

Reception”).

IMPORTANT:

Transmission problems will arise if the setting for additional sensors is not

followed as described above. Should transmission problems occur, it is

necessary to remove the batteries from all units and start again the set-up

from step 1.

Notes:

 If the signal reception is not successful on the first frequency of

915MHz for 45 seconds, the frequency is changed to 920MHz and

the learning is tried for another 45 seconds. If it is still not

successful the reception is tried for 45 seconds on 910MHz. This

will also be done during re-synchronization.

 When the weather station is receiving the WWVB time signal, the

outdoor transmitter data signal will temporarily not be received by

the weather station. During this short period of time, the outdoor

readings shown on the weather station will not be renewed until the

WWVB time signal is successfully received.

TO INSTALL AND REPLACE BATTERIES IN THE THERMO-

HYGRO TRANSMITTER

The Thermo-Hygro Transmitter uses 2 x AA, IEC, LR6,

1.5V batteries. To install and replace the batteries,

please follow the steps below:

1. Remove the cover.

2. Insert the batteries, observing the correct polarity

(see marking).

3. Replace the battery cover.

Note:

In the event of changing batteries in any of the units, all units need to be

reset by following the setting up procedures. This is due to a random

security code assigned by the transmitter at start-up. This code must be

received and stored by the Weather Station in the first 3 minutes of power

being supplied to the transmitter.

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER

STATION

The Weather Station uses 2 x C, IEC LR14, 1.5V batteries. To install and

replace the batteries, please follow the steps below:

1. Insert finger or other solid object in the space at the bottom center

of the battery compartment and lift up to remove the cover.

2. Insert batteries observing the correct polarity (see marking).

3. Replace compartment cover.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis

to ensure optimum accuracy of these units.

Please participate in the preservation of the

environment. Return used batteries to an authorized

depot.

DEVICE RESET

The Weather Station and the Thermo-hygro transmitter need to be reset

when one of the following conditions occur:

 Unsuccessful 915 MHz signal reception.

 Malfunction on the units.

 Batteries replacement.

For resetting, remove all batteries from the units. Wait at least for 1

minute before powering up the Weather station again. Proceed from step

1 in “Setting Up”.

ABOUT WWVB RADIO CONTROLLED TIME

The NIST (National Institute of Standards and Technology—Time and

Frequency Division) WWVB radio station is located in Ft. Collins,

Colorado, and transmits the exact time signal continuously throughout the

United States at 60 kHz. The signal can be received up to 2,000 miles

away through the internal antenna in the weather projection station.

However, due to the nature of the Earth’s Ionosphere, reception is very

limited during daylight hours. The wireless weather station will search for

a signal every night when reception is best.

The WWVB radio station receives the time data from the NIST Atomic

clock in Boulder, Colorado. A team of atomic physicists is continually

measuring every second, of every day, to an accuracy of ten billionths of

a second per day. These physicists have created an international

standard, measuring a second as 9,192,631,770 vibrations of a Cesium-

133 atom in a vacuum. For more detail, visit

http://www.boulder.nist.gov/timefreq.htm. To listen to the NIST time, call

(303)499-7111. This number will connect you to an automated time,

announced at the top of the minute in “Coordinated Universal Time”,

which is also known as Greenwich Mean Time (GMT). This time does not

follow Daylight Saving Time changes. After the top of the minute, a tone

Produktspecifikationer

Varumärke:	La Crosse Technology
Kategori:	Väderstation
Modell:	WS-9057U-IT

Behöver du hjälp?

Om du behöver hjälp med La Crosse Technology WS-9057U-IT ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Väderstation La Crosse Technology Manualer

La Crosse Technology CA73071 Bruksanvisning

5 Mars 2025

La Crosse Technology M71633 Bruksanvisning

8 Januari 2025

La Crosse Technology V41CA Bruksanvisning

8 Januari 2025

La Crosse Technology CA74177 Bruksanvisning

27 December 2024

La Crosse Technology S73071 Bruksanvisning

27 December 2024

La Crosse Technology 308-1415FCT-NH Bruksanvisning

27 December 2024

La Crosse Technology V61 Bruksanvisning

8 Oktober 2024

La Crosse Technology 308-1414B Bruksanvisning

29 September 2024

La Crosse Technology WS-7091 Bruksanvisning

29 September 2024

La Crosse Technology 308-1415V4 Bruksanvisning

27 September 2024

Väderstation Manualer

Nyaste Väderstation Manualer

TFA 35.1044.55.IT Bruksanvisning

2 April 2025

Bresser Translucidus NV Bruksanvisning

27 Mars 2025

Bresser ClimaTemp TB Bruksanvisning

27 Mars 2025

Konyks Termo Hygro Bruksanvisning

27 Februari 2025

Sencor SWS 3600 Bruksanvisning

15 Februari 2025

TFA 30.5059.02 Bruksanvisning

5 Februari 2025

Auriol IAN 77437 Bruksanvisning

27 Januari 2025

Bresser Weather Center 5-in-1 Bruksanvisning

27 Januari 2025

Auriol AHFL 433 B2 Bruksanvisning

12 Januari 2025

Alecto WS-1200 Bruksanvisning

8 Januari 2025