La Crosse Technology WS9180 IT plus Bruksanvisning
La Crosse Technology
Väderstation
WS9180 IT plus
Läs nedan 📖 manual på svenska för La Crosse Technology WS9180 IT plus (4 sidor) i kategorin Väderstation. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/4
19
LCD Display
Outdoor Reception
Signal icon*
MIN/MAX indoor
temperature
SET key
Minutes (flashing)
Hours (flashing)
MAX record
Outdoor reception
signal icon
MIN/MAX outdoor
temperature
Alarm icon (ON)
Alarm time
WIRELESS 868 MHz WEATHER STATION
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this Weather Station with wireless 868 MHz transmission of
outdoor temperature and display of indoor temperature, weather forecast icons and weather
tendency indicators. It is further featuring a DCF-77 radio controlled clock and alarm function.
With four easy to use function keys, this innovative product is ideal for use in the home or
office.
FEATURES:
The Weather station
•
DCF-77 Radio controlled time function with manual time setting options
•
DCF time reception ON/OFF
•
24 hour display
•
Alarm function with snooze
•
Time zone +/- 12 hours
•
Temperature display in degree Celsius (°C)
•
Indoor and outdor temperature with MIN/MAX records
•
Manual reset of MIN/MAX records
•
3 weather forecast with weather tendency indicator
•
Signal reception intervals at 4 seconds
•
Low battery indicator
•
Wall mounting or table standing (foldout stand)
The Outdoor Temperature Transmitter
•
Remote transmission of outdoor temperature to weather
station by 868 MHz signals
•
Shower proof casing
•
Wall mounting and table-standing
SETTING UP:
Note: This weather station receives only one outdoor transmitter.
1. First, insert the batteries into the Temperature transmitter. (see “Install and replace
batteries in the temperature transmitter“).
2. Immediately after and within 30 seconds, insert the batteries into Weather station (see
“I ”). Once the batteries are in nstall and replace batteries in the weather station
place, all segments of the LCD will light up briefly. Following the time as 0:00 and the
weather icon will be displayed. If these are not displayed after 60 seconds, remove the
batteries and wait for at least 30 seconds before reinserting them.
3. After inserting the batteries, the Weather station will start receiving data from the
transmitter. The outdoor temperature and the signal reception icon should then be
displayed on the Weather station. If this does not happen after 3 minutes, the batteries
will need to be removed from both units and reset from step 1.
4. In order to ensure sufficient 868 MHz transmission however, this should under good
conditions be a distance no more than 100 meters between the final position of the
weather station and the transmitter (see notes on “ ” and “Mounting 868 MHz
Reception”).
5. Once the remote temperature has been received and displayed on the weather station,
the DCF time (radio controlled time) code reception is automatically started. This takes
typically between 3-5 minutes in good conditions.
HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION
The weather station uses 3 x AAA, IEC LR3,
1.5V batteries. When batteries will need to be
replaced, the low battery icon will appear on
the LCD. To install and replace the batteries,
please follow the steps below:
1. Lift up the battery compartment cover.
2. Insert batteries observing the correct
polarity (see marking).
3.
Replace compartment cover.
HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
TRANSMITTER
The temperature transmitter uses 2 x AA, IEC LR6, 1.5V battery. To
install and replace the batteries, please follow the steps below:
1. Remove the battery compartment cover at the back of the
transmitter.
2. Insert the batteries, observing the correct polarity (see marking).
3. Replace the battery compartment cover on the unit.
Note:
In the event of changing batteries in any of the units, all units need to be
reset by following the setting up procedures. This is because a security
code is assigned by the transmitter at start-up and this code must be
received and stored by the Weather station in the first 3 minutes of power being supplied to it.
DCF RADIO CONTROLLED TIME
The time base for the radio controlled time is a Cesium Atomic Clock operated by the
Physikalisch Technische Bundesanstalt Braunschweig which has a time deviation of less than
one second in one million years. The time is coded and transmitted from Mainflingen near
Frankfurt via frequency signal DCF-77 (77.5 kHz) and has a transmitting range of
approximately 1,500 km. Your radio-controlled weather station receives this signal and
converts it to show the precise time in summer or wintertime.
The quality of the reception depends greatly on the geographic location. In normal cases,
there should be no reception problems within a 1,500 km radius of Frankfurt.
DCF reception is done twice daily at 02:00 and 03:00 am. If the reception is not successful at
03:00 am, then the next reception takes place the next hour and so on until 06:00am, or until
the reception is successful. If the reception is not successful at 06:00 am, then the next
attempt will take place the next day at 02:00 am.
If the tower icon flashes, but does not set the time or the DCF tower does not appear at all,
then please take note of the following:
•
Recommended distance to any interfering sources like computer monitors or TV sets is
a minimum of 1.5 - 2 meters.
•
Within ferro-concrete rooms (basements, superstructures), the received signal is
naturally weakened. In extreme cases, please place the unit close to a window and/ or
point its front or back towards the Frankfurt transmitter.
•
During nighttime, the atmospheric disturbances are usually less severe and reception is
possible in most cases. A single daily reception is adequate to keep the accuracy
deviation below 1 second.
FUNCTION KEYS:
Weather station:
The weather station has four easy to use function keys.
SET key
•
Press the key to enter manual setting modes: Time zone, Time reception ON/OFF and
Manual time
•
Stop the alarm
+ key
•
To make adjustment for various settings
•
Stop the alarm
ALARM key
•
Enter the alarm setting mode
•
Switch the alarm ON/ OFF
•
Stop the alarm
MIN/MAX RESET key
•
Press and hold to reset the MIN/MAX temperature records
•
Activate the snooze
•
Exit manual setting modes
LCD SCREEN:
* When the outdoor signal is successfully received by the Weather Station, this icon will be
switched on. (If not successful, the icon will not be shown in LCD) So user can easily see
whether the last reception was successful (icon on) or not (icon off).
MANUAL SETTINGS:
The following manual settings can be done in the setting mode:
•
Time zone
•
Time reception DCF ON/OFF
•
Manual time
Press and hold the key for about 3 seconds to advance to the setting mode: SET
TIME ZONE SETTING:
The time zone default is "0 hour. To set a different time zone: "
1. The current time zone value starts flashing.
2. Use the key to set the time zone. The range runs from 0, -1, -2… +
-12, 12, 11, 10… 2, 1, 0, in consecutive 1-hour intervals.
3.
Confirm with the key and enter the . SET Time reception On/Off setting
TIME RECEPTION ON/OFF SETTING
In area where reception of the radio-controlled time (DCF time) is not possible, the time
reception function can be turned OFF. The clock will then work as a normal Quartz clock.
(Default setting is ON).
1. The digit “ON” digit will start flashing on the LCD.
2. Use the key to turn OFF the time reception function if necessary. +
3. Confirm with the key and enter the . SET Manual time setting
Note:
If the Time Reception function is turned OFF manually, the clock will not attempt any
reception of the radio-controlled time (DCF time) as long as the Time Reception OFF function
is activated. The Time Reception icon and the DCF icon will not be displayed on the LCD.
MANUAL TIME SETTING
In case the weather station is not able to detect the radio-controlled time (DCF time) signal
(disturbances, transmitting distance, etc.), the time can be manually set. The clock will then
work as a normal Quartz clock.
To set the clock:
1. The hour digits start flashing in the time display section.
2. Use the key to adjust the hours and then press key to go to the minute setting. + SET
3. The minute will be flashing. Press the key to just the minutes. +
4.
Confirm with the key and exit the setting mode.SET
Note :
The unit will still try to receive the signal despite a manual setting. When the signal is
received, the manually set time will automatically be replaced by the received time. During
reception attempts, the DCF tower icon will flash. If reception has been unsuccessful, the
DCF tower icon will not appear but reception will still be attempted.
ALARM SETTING
To set alarm:
1. Press and hold for about 3 seconds until the alarm time display flashes. ALARM
2. The hour digit and the alarm icon will be flashing. Press the key to adjust the hour. +
3. Press button once and minute digit will be flashing. User shall then press ALARM +
button to set the minute.
4. Press button once to confirm the setting. ALARM
5.
To activate/ deactivate the alarm function, press the button once. The display ALARM
of the alarm icon represents that the alarm is "ON".
Note: The duration of alarm sounding is 85 seconds
TO ACTIVATE THE SNOOZE FUNCTION AND STOPPING THE ALARM:
1. When the alarm is sounding, press the key to activate the snooze MIN/MAX RESET
function. The alarm will stop and re-activate after the snooze interval of 10 minutes.
2.
To stop the alarm completely, press any keys other than the key.MIN/MAX RESET
WEATHER FORECAST AND TENDENCY
THE WEATHER FORECASTING ICONS :
There are 3 weather icons in the second section of LCD which can be displayed in any of the
following combinations :
For every sudden or significant change in the air pressure, the weather icons will update
accordingly to represent the change in weather. If the icons do not change, then it means
either the air pressure has not changed or the change has been too slow for the Weather
station to register. However, if the icon displayed is a sun or raining cloud, there will be no
change of icon if the weather gets any better (with sunny icon) or worse (with rainy icon) since
the icons are already at their extremes.
The icons display weather forecasts in terms of getting better or worse, and not necessarily
sunny or rainy as each icon indicates. For example, if the current weather is cloudy and the
rainy icon is displayed, it does not mean that the product is faulty because it is not raining. It
simply means that the air pressure has dropped and the weather is expected to get worse but
not necessarily rainy.
Note:
After setting up, readings for weather forecasts should be disregarded for the next 12-24
hours. This will allow sufficient time for the Weather Station to collect air pressure data at a
constant altitude and therefore result in a more accurate forecast.
Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather
forecasting feature is estimated to have an accuracy level of about 75% due to the varying
areas the Weather Station has been designed for use in. In areas that experience sudden
changes in weather (for example from sunny to rain), the Weather Station will be more
accurate compared to use in areas where the weather is stagnant most of the time (for
example mostly sunny).
If the weather station is moved to another location significantly higher or lower than its initial
standing point (for example from the ground floor to the upper floors of a house), remove the
batteries and re-insert them after about 30 seconds. By doing this, the Weather Station will
not mistake the new location as being a possible change in air-pressure when really it is due
to the slight change of altitude. Again, disregard weather forecasts for the next 12 to 24 hours
as this will allow time for operation at a constant altitude.
THE WEATHER TENDENCY INDICATOR
Working together with the weather icons are the weather tendency indicators (located on the
left and right hand side of the weather icons). When the indicator points upwards, it means
that the air-pressure is increasing and the weather is expected to improve, but when indicator
points downwards, the air-pressure is dropping and the weather is expected to become
worse.
Taking this into account, you will see how the weather has changed and how it is expected to
change. For example, if the indicator is pointing downwards together with cloud and sun
icons, then the last noticeable change in the weather was when it was sunny (sun icon only).
Therefore, the next change in the weather will be the cloud with rain icons since the indicator
is pointing downwards.
Note:
Once the weather tendency indicator has registered a change in the air pressure, it will
remain permanently visualized on the LCD.
INDOOR TEMPERATURE AND MIN/MAX RECORDS
The indoor temperature and indoor MIN/MAX records are displayed on the last section of the
LCD.
Note: The MIN/MAX indoor temperature range is -9ºC to + 38ºC with 1 C resolution. °
OUTDOOR TEMPERATURE AND MIN/MAX RECORDS
The outdoor temperature and outdoor MIN/MAX records are displayed on the last section of
the LCD.
Note: The MIN/MAX outdoor temperature resolution is range -40ºC to + 60ºC with 1 C °
resolution.
RESETTING THE INDOOR AND OUTDDOR MIN/MAX RECORDS
Note: All the MIN/MAX records will be reset at the same time.
1. In normal display mode, press and hold the key for 3 seconds. This MIN/MAX RESET
will reset the indoor and outdoor MIN/MAX temperatures.
868 MHz RECEPTION CHECK
The weather station should receive the temperature data within 3 minutes after set-up. If the
temperature data is not received 3 minutes after setting up (not successfully continuously, the
outdoor display shows “- - -” ), please check the following points:
1. The distance of the weather station or transmitter should be at least 1.5 to 2 meters
away from any interfering sources such as computer monitors or TV sets.
2. Avoid positioning the weather station onto or in the immediate proximity of metal
window frames.
3. Using other electrical products such as headphones or speakers operating on the same
signal frequency (868MHz) may prevent correct signal transmission and reception.
4. Neighbours using electrical devices operating on the 868MHz signal frequency can also
cause interference.
Note:
When the 868MHz signal is received correctly, do not re-open the battery cover of either the
transmitter or weather station, as the batteries may spring free from the contacts and force a
false reset. Should this happen accidentally then reset all units (see above) Setting up
otherwise transmission problems may occur.
The transmission range is about 100 m from the transmitter to the weather station (in open
space). However, this depends on the surrounding environment and interference levels. If no
reception is possible despite the observation of these factors, all system units have to be
reset (see ). Setting up
POSITIONING THE WEATHER STATION:
The weather Station may be hung onto wall easily or free standing.
Choose a sheltered place. Avoid direct rain and sunshine.
Before wall mounting, please check that the outdoor temperature values
can be received from the desired locations.
Wall mounting
1. Fix a screw (not supplied) into the desired wall, leaving the head
extended out by about 5mm.
2. Remove the stand from the Weather Station by pulling it away from
the base and hang the station onto the screw. Remember to ensure
that it locks into place before releasing.
Free standing
With the foldout stand, the weather station can be placed onto any flat
surface.
POSITIONING THE TEMPERATURE TRANSMITTER:
The Transmitter is supplied with a holder that may be attached to a
wall with the two screws supplied. The Transmitter can also be
position on a flat surface by securing the stand to the bottom to the
Transmitter.
To wall mount:
1. Secure the bracket onto a desired wall using the screws and
plastic anchors.
2. Clip the remote temperature sensor onto the bracket.
Note:
Before permanently fixing the transmitter wall base, place all units in the
desired locations to check that the outdoor temperature reading is
Function keys
Foldout stand
Battery compartment cover
Hanging hole
Time
Indoor
Temperature in °C Outdoor
Temperature in °C
Weather tendency
indicator
Weather forecast icon
Low battery
indicator
(weather station)
Low battery
indicator
(transmitter)
MIN/MAX
RESET key ALARM key
+ key
Time zone (flashing)
flashing
Rainy
Cloudy with
sunny intervals
Sunny
Indoor
Temperature
MIN record
Indoor
icon
MAX record
Outdoor
Temperature
MIN record
Outdoor icon
Radio
controlled time
reception icon
Alarm icon
«
Instant Transmission+» is the u
p and coming state
-
of
-
the
-
art new wireless
transmission technology, exclusively designed and developed by LA CROSSE
TECHNOLOGY.
“IT +” offers you an immediate update of all your outdoor data measured from the
transmitters: follow your climatic variations in real-time!
Function keys
20
receivable. In event that the signal is not received, relocate the transmitters or move them
slightly as this may help the signal reception.
CARE AND MAINTENANCE:
•
Extreme temperatures, vibration and shock should be avoided as these may cause
damage to the unit and give inaccurate forecasts and readings.
•
Precautions shall be taken when handling the batteries. Injuries, burns, or property
damage may be resulted if the batteries are in contact with conducting materials, heat,
corrosive materials or explosives. The batteries shall be taken out from the unit before
the product is to be stored for a long period of time.
•
Immediately remove all low powered batteries to avoid leakage and damage. Replace
only with new batteries of the recommended type.
•
When cleaning the display and casings, use a soft damp cloth only. Do not use
solvents or scouring agents as they may mark the LCD and casings.
•
Do not submerge the unit in water.
•
Special care shall be taken when handling a damaged LCD display. The liquid crystals
can be harmful to user's health.
•
Do not make any repair attempts to the unit. Return them to their original point of
purchase for repair by a qualified engineer. Opening and tampering with the unit may
invalidate their guarantee.
•
Never touch the exposed electronic circuit of the device as there is a danger of electric
shock should it become exposed.
•
Do not expose the units to extreme and sudden temperature changes, this may lead to
rapid changes in forecasts and readings and thereby reduce their accuracy.
SPECIFICATIONS:
Recommended operating temperature range : 5ºC to 40ºC
Temperature measuring range:
Indoor : -9.9ºC to +37.8ºC with 0.1ºC resolution
(“ ” displayed if outside this range) OF.L
Outdoor : -39.9ºC to +59.9ºC with 0.1ºC resolution
(“ ” displayed if outside this range) OF.L
Indoor temperature checking interval : every 16 seconds
Outdoor data reception : every 4 seconds
Power consumption:
Weather station : 3 x AAA, IEC, LR3, 1.5V
Temperature transmitter : 2 x AA, IEC, LR6, 1.5V
Battery life cycle (Alkaline batteries recommended) : appr. 12 months
Dimensions (L x W x H) :
Weather station : 170.8 x 28.3 x 127mm
Temperature transmitter : 38.2 x 21.2 x 128.3 mm
LIABILITY DISCLAIMER:
•
The electrical and electronic wastes contain hazardous substances. Disposal of
electronic waste in wild country and/or in unauthorized grounds strongly damages the
environment.
•
Please contact your local or/and regional authorities to retrieve the addresses of legal
dumping grounds with selective collection.
•
All electronic instruments must from now on be recycled. User shall take an active part
in the reuse, recycling and recovery of the electrical and electronic waste.
•
The unrestricted disposal of electronic waste may do harm on public health and the
quality of environment.
•
As stated on the gift box and labeled on the product, reading the “User manual” is
highly recommended for the benefit of the user. This product must however not be
thrown in general rubbish collection points.
•
The manufacturer and supplier cannot accept any responsibility for any incorrect
readings and any consequences that occur should an inaccurate reading take place.
•
This product is designed for use in the home only as indication of the temperature and
other weather data.
•
This product is not to be used for medical purposes or for public information.
The specifications of this product may change without prior notice.
•
This product is not a toy. Keep out of the reach of children.
No part of this manual may be reproduced without written authorization of the
manufacturer.
R&TTE Directive 1999/5/EC
Summary of the Declaration of Conformity : We hereby declare that this wireless transmission device
does comply with the essential requirements of R&TTE Directive 1999/5/EC.
Produktspecifikationer
| Varumärke: | La Crosse Technology |
| Kategori: | Väderstation |
| Modell: | WS9180 IT plus |
Behöver du hjälp?
Om du behöver hjälp med La Crosse Technology WS9180 IT plus ställ en fråga nedan och andra användare kommer att svara dig
Väderstation La Crosse Technology Manualer
8 Oktober 2024
29 September 2024
29 September 2024
27 September 2024
25 September 2024
22 September 2024
22 September 2024
22 September 2024
20 September 2024
17 September 2024
Väderstation Manualer
- Väderstation Braun
- Väderstation Daewoo
- Väderstation Honeywell
- Väderstation Ade
- Väderstation Alecto
- Väderstation Ascot
- Väderstation Lexibook
- Väderstation Nedis
- Väderstation Pyle
- Väderstation Taylor
- Väderstation Livoo
- Väderstation OBH Nordica
- Väderstation Hyundai
- Väderstation Renkforce
- Väderstation ECG
- Väderstation Clatronic
- Väderstation Lowrance
- Väderstation Sencor
- Väderstation Blaupunkt
- Väderstation Elro
- Väderstation EMOS
- Väderstation Extech
- Väderstation Denver
- Väderstation Hama
- Väderstation Cresta
- Väderstation Brigmton
- Väderstation Velleman
- Väderstation GlobalTronics
- Väderstation GoGEN
- Väderstation AcuRite
- Väderstation Muse
- Väderstation Auriol
- Väderstation Ventus
- Väderstation Technoline
- Väderstation Cotech
- Väderstation Davis
- Väderstation Netatmo
- Väderstation Bresser
- Väderstation TFA
- Väderstation Clas Ohlson
- Väderstation Irox
- Väderstation Konig
- Väderstation Trevi
- Väderstation Orion
- Väderstation EVE
- Väderstation UPM
- Väderstation Fluke
- Väderstation Minox
- Väderstation Gira
- Väderstation Jung
- Väderstation Krontaler
- Väderstation Balance
- Väderstation Day
- Väderstation ELV
- Väderstation Dexford
- Väderstation EQ3
- Väderstation Saxon
- Väderstation IT
- Väderstation Garni
- Väderstation HomeMatic
- Väderstation Eurochron
- Väderstation La Crosse
- Väderstation Durabase
- Väderstation Meade
- Väderstation Brandson
- Väderstation Levenhuk
- Väderstation Digi-tech
- Väderstation Oregon Scientific
- Väderstation Unitec
- Väderstation TFA Dostmann
- Väderstation Greisinger
- Väderstation Ease Electronicz
- Väderstation Rebel
- Väderstation Mebus
- Väderstation Saphir
- Väderstation Paget Trading
- Väderstation PeakTech
- Väderstation Chauvin Arnoux
- Väderstation Techno Line
- Väderstation Uzoli
- Väderstation Xeecom ApS
- Väderstation Marathon
- Väderstation Ea2 LABS
- Väderstation Hesdo
- Väderstation Weinberger
- Väderstation Majestic
- Väderstation EMOS SELECT
- Väderstation Prologue
- Väderstation Gewiss
- Väderstation National Geographic
- Väderstation Browin
- Väderstation ClimeMET
- Väderstation Thierry Mugler
- Väderstation Otio
- Väderstation Baldr
- Väderstation Setti+
- Väderstation Bearware
Nyaste Väderstation Manualer
20 Oktober 2024
18 Oktober 2024
15 Oktober 2024
6 Oktober 2024
5 Oktober 2024
5 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024