La Crosse WS6118 Bruksanvisning
Läs nedan 📖 manual på svenska för La Crosse WS6118 (13 sidor) i kategorin klocka. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/13
15
LCD2
display
LCD1
display
Battery cover
Hanging holes
Foldable stand
MOONPHASE WALL CLOCK
Instruction Manual
FEATURES:
MOONPHASE WALL CLOCK:
• DCF-77 Radio controlled time with manual setting option
• 12/24 hour time display
• Time display: hour, minute, second
• Alarm setting with snooze function
• Calendar display
Function keys
« Instant Transmission+» is the up and coming state-of-the-art new wireless
transmission technology, exclusively designed and developed by LA CROSSE
TECHNOLOGY.
“IT +” offers you an immediate update of all your outdoor data measured from the
transmitters: follow your climatic variations in real-time!
16
• Weekday display (4 languages to choose from: German, English, French, and Spanish)
• Display 12 Moon phases throughout the year
• Time zone setting
• ºC or ºF temperature display selectable
• Indoor temperature display
• Outdoor temperature display
• Wireless transmission at 868MHz
•
Signal reception intervals at 4 seconds
• Low battery indicator
• Wall mount or freestanding
OUTDOOR TEMPERATURE TRANSMITTER:
• Remote transmission of outdoor temperature to Weather Station
by 868 MHz
• Wall mounting case
• Mounting at a sheltered place. Avoid direct rain and sunshine
TO INSTALL AND REPLACE BATTERIES IN THE MOONPHASE WALL CLOCK
The Moonphase wall clock uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the
batteries, please follow the steps below:
1. Insert finger or other solid object in the space at the bottom center of the battery
compartment and lift up to remove the cover.
2. Insert batteries observing the correct polarity (see marking inside battery compartment).
3. Replace compartment cover.
DO NOT SET THE CLOCK.
TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE
TRANSMITTER
The transmitter uses 2 x AA, IEC LR6, 1.5V batteries. To install and replace the batteries, please
follow the steps below:
1. Remove the cover.
17
2. Insert the batteries, observing the correct polarity (see battery compartment marking).
3. Replace the battery cover on the unit.
Alkaline batteries are recommended for use in both units. Avoid using rechargable
batteries.
SETTING UP:
1. Insert the 2 x AA, IEC LR6, 1.5V batteries into the transmitter (See “To install and
replace batteries in the Temperature Transmitter” above).
2. Within 3 minutes, insert 2 x AA, IEC LR6, 1.5V batteries into the Moonphase wall clock as
indicated above (see "To install and replace batteries in the Moonphase wall clock“
above).
3. Once the batteries are in place, all segments of the LCD will light up briefly. Then the
indoor and outdoor temperature - -.-°C, the time as 0:00, the date as 1/1, and weekday will
be displayed.
4. Do not press any buttons for 10 minutes
5. The Moonphase wall clock will start receiving data from the transmitter. The remote
temperature will then be displayed on the Moonphase wall clock. If the outdoor
temperature is not displayed 90 seconds after inserting the batteries into the receiver, all
batteries are needed to be removed and wait for at least 1 minute for reset from step 1.
6. The DCF time code reception will automatically start. This takes typically between 3 - 5
minutes in good conditions. This time period is an excellent opportunity to locate the
transmitter in suitable location outdoors. In order to ensure sufficient 868MHz transmission
however, this should under good conditions be no more than 100 meters from where the
Moonphase wall clock will be finally positioned (see notes on “Positioning” and “868MHz
Reception”).
7. If after 10 minutes the DCF time has not been received, use the SET key to manually enter
the set mode and change either the time or date in order to activate the DCF reception.
When this is successful, the received time will override the manually set time. The date is
also updated with the received time (Please refers to notes on “DCF Radio controlled
time” and “Manual time setting”).
Note:
In the event of changing batteries of the unit ensure that the batteries do not spring free from the
contacts. Always wait at least 1 minute after removing the batteries before reinserting, otherwise
start up and transmission problems may occur.
Produktspecifikationer
| Varumärke: | La Crosse |
| Kategori: | klocka |
| Modell: | WS6118 |
Behöver du hjälp?
Om du behöver hjälp med La Crosse WS6118 ställ en fråga nedan och andra användare kommer att svara dig
klocka La Crosse Manualer
10 September 2024
klocka Manualer
- klocka Casio
- klocka IKEA
- klocka Braun
- klocka Fysic
- klocka Alecto
- klocka Amplicom
- klocka Ascot
- klocka Invicta
- klocka Ecom
- klocka Nedis
- klocka Taylor
- klocka Livoo
- klocka RCA
- klocka United Office
- klocka Karlsson
- klocka Elro
- klocka Hama
- klocka Cresta
- klocka GlobalTronics
- klocka La Crosse Technology
- klocka Marquant
- klocka AcuRite
- klocka Muse
- klocka Auriol
- klocka Ventus
- klocka Fisher Price
- klocka Technoline
- klocka AV:link
- klocka Audiovox
- klocka Davis
- klocka McIntosh
- klocka Balance Time
- klocka Valcom
- klocka Hager
- klocka Chacon
- klocka TFA
- klocka Irox
- klocka Trevi
- klocka Gira
- klocka Krontaler
- klocka Balance
- klocka Geemarc
- klocka IHome
- klocka Dormakaba
- klocka BBrain
- klocka Eurochron
- klocka Sempre
- klocka Global Tronics
- klocka Oregon Scientific
- klocka TFA Dostmann
- klocka Antelope Audio
- klocka Equity
- klocka Mebus
- klocka Focus Electrics
- klocka Techno Line
- klocka Gingko
- klocka Weinberger
- klocka CyberData Systems
- klocka Electronics International
- klocka Antelope
- klocka Bearware
Nyaste klocka Manualer
26 Oktober 2024
19 Oktober 2024
18 Oktober 2024
11 Oktober 2024
7 Oktober 2024
6 Oktober 2024
5 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024