Labelmate CAT-40G Bruksanvisning

Labelmate Inte kategoriserad CAT-40G

Läs nedan 📖 manual på svenska för Labelmate CAT-40G (1 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/1
© LABELMATE User_ 05/17 Original user manual. –TA – – ● KEEP MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE ●
Tension Arm for "CAT-TA" Rewinder
Control Arm for "UCAT-3"/"UCAT-40" Unwinders
• CAT-3-TA/CAT- -TA: On-40G
demand Rewinding Turns
Off When Labels Stop
Coming from Your Printer
• UCAT-3 / UCAT-40: On-
demand Unwinding Turns
On When Printer Needs
Labels
CAT-3- -STANDARD TA
UCAT- 40
SET-UP:
1. The Tension Arm/Control Arm is to be mounted vertically. UCAT-40:
CAT-3-TA / CAT- -TA:40G The Tension Arm can be mounted facing either right or
left, depending on which side the labels are coming from.
UCAT-3: The Control Arm can be mounted facing either right or left, depending on
which side the labels need to go to.
2. Remove and keep the large Screw from the end of the Tension/Control Arm Shaft
(the small Shaft below the main Motor Shaft).
3. Loosen the Set Screw at the end of the Tension/Control Arm and position the Arm
with the Set Screw facing the flat on the Tension/Control Arm Shaft.
4. Tighten the Set Screw facing the flat on the Shaft.
5. -insert and tighten the Tension/Control Arm Shaft Screw snugly into the Re
Tension/Control Arm Shaft.
The Unit is now ready for use.
USE POWER REWINDING (CATs): –
1. Run the label web to be rewound under the Rewinder Tension Arm and onto the take-
up label Core on the Rewinder.
2. Place the Rewinder DIRECTION switch in the desired position according to which
direction you want to rewind the labels.
3. Place the REWIND SLIT Switch in the REWIND position and set the TORQUE –
ADJUST about 1/3 rotation from fully CCW as an initial setting.
4. Start your printer and observe how the labels are being rewound.
5. Adjust the TORQUE Control as needed to provide more or less (faster or slower)
rewind power. As the Rewinder winds up the labels, the Tension Arm will rise,
eventually causing the Rewinder to turn off. As the printer feeds more labels that
need to be rewound, the labels and the Tension Arm will drop down, turning on the
Rewinder again.
6. A weight can be placed on the Tension Arm if desired to control the rewind web
tension.
USE POWER UNWINDING (UCATs): –
Refer to your Unwinder User Manual.
SPRL
290, Chaussée de Ruisbroek, 1620 Drogenbos, BELGIUM
TEL: +32 2.375.69.60 FAX: +32 2.375.38.96 –
brussels@labelmate.com
www.labelmateeurope.com

Produktspecifikationer

Varumärke: Labelmate
Kategori: Inte kategoriserad
Modell: CAT-40G

Behöver du hjälp?

Om du behöver hjälp med Labelmate CAT-40G ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Labelmate Manualer

Labelmate

Labelmate UCAT-40 Bruksanvisning

24 Augusti 2024
Labelmate

Labelmate CAT-4 Bruksanvisning

24 Augusti 2024
Labelmate

Labelmate UCAT-1-CHUCK Bruksanvisning

24 Augusti 2024
Labelmate

Labelmate S-100S Bruksanvisning

24 Augusti 2024
Labelmate

Labelmate CAT-4-ACH Bruksanvisning

24 Augusti 2024
Labelmate

Labelmate Count-200 Bruksanvisning

24 Augusti 2024
Labelmate

Labelmate Count-100 Bruksanvisning

24 Augusti 2024
Labelmate

Labelmate CAT-40G Bruksanvisning

24 Augusti 2024
Labelmate

Labelmate LD-100-U Bruksanvisning

24 Augusti 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024