Lancom LX-7500 Bruksanvisning
Lancom
Åtkomstpunkt
LX-7500
Läs nedan 📖 manual på svenska för Lancom LX-7500 (4 sidor) i kategorin Åtkomstpunkt. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/4
Hardware Quick Reference
Mounting & connecting
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their
owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors
and / or omissions. 0824
Before initial startup, please make sure to take notice of the information regarding the intended use in the
enclosed installation guide!
Please note that support for third-party accessories is not provided.
Please observe the following when setting up the device
→Donotplaceanyobjectsonthetopofthedeviceorstackseveraldevices
→Lockablewallandceilingmountingusingthesuppliedwallmount
i
LANCOM LX-7500
Wall mounting
Depending on the wall material structure, select 4 suitable pan
head screws M4x35 ➀ and, if necessary, suitable dowels for
mounting the retaining plate ➁ on a sufficiently load-bearing
wall.
Mount the retaining plate ➁ ➀ with the screws through the
holes marked in the illustration to the wall.
The access point is already prepared for mounting on the
mounting plate.
Insert the access point into the mounting plate so that the locking
mechanisms on the device and mounting plate are opposite each
other and the screws M6x10 ➃ already pre-assembled on the
device reach into the keyhole-shaped recesses of the retaining
plate. Then push the device towards the locking mechanism up
to the stop.
Ensure that the appliance is locked by tightening the locking
screw ➂ in the direction of the device and then turn it 90°
clockwise.
To remove the device, turn the locking screw ➂ 90°
counterclockwise and pull it away from the device. The device
can now be removed from the retaining plate in the opposite
direction to the locking direction.
➃
➂
Ceiling mounting
Depending on the ceiling material structure, select 4 suitable
pan head screws M4x35 ➀ and, if necessary, suitable dowels
for mounting the retaining plate ➁ on a sufficiently load-bearing
ceiling.
Mount the retaining plate ➁ ➀ with the screws through the
holes marked in the illustration to the ceiling.
The access point is already prepared for mounting on the
mounting plate.
Insert the access point into the mounting plate so that the locking
mechanisms on the device and mounting plate are opposite each
other and the screws M6x10 ➃ already pre-assembled on the
device reach into the keyhole-shaped recesses of the retaining
plate. Then push the device towards the locking mechanism up
to the stop.
Ensure that the appliance is locked by tightening the locking
screw ➂ in the direction of the device and then turn it 90°
clockwise.
To remove the device, turn the locking screw ➂ 90°
counterclockwise and pull it away from the device. The device
can now be removed from the retaining plate in the opposite
direction to the locking direction.
➃ ➂
➀
USB 3.0 interface
Connect compatible USB devices to the USB interface either
directly or via a suitable USB cable.
➁
Kensington Lock holder
For mechanical theft protection of the access point
➂
Reset button
Pressed up to 5 seconds: Device restart
Pressed longer than 5 seconds:
Configuration reset and device restart
RESET
➃
TP-Ethernet interfaces ETH1 / ETH2
Connect the ETH1 or ETH2 interfaces to other network
components using suitable Ethernet cables.
➁ ➃➂
➀
➀
➁
➂
➂
➁
➀
LED description & technical details
LANCOM LX-7500
Hardware Quick Reference
🄰 🄱
🄰 Power
🄱 WLAN Link
Hardware
Interfaces
Wi-Fi
Other radio technologies
Package content
Produktspecifikationer
| Varumärke: | Lancom |
| Kategori: | Åtkomstpunkt |
| Modell: | LX-7500 |
Behöver du hjälp?
Om du behöver hjälp med Lancom LX-7500 ställ en fråga nedan och andra användare kommer att svara dig
Åtkomstpunkt Lancom Manualer
26 September 2024
26 September 2024
19 September 2024
4 September 2024
4 September 2024
29 Augusti 2024
28 Augusti 2024
Åtkomstpunkt Manualer
- Åtkomstpunkt Bosch
- Åtkomstpunkt Huawei
- Åtkomstpunkt Allnet
- Åtkomstpunkt Allied Telesis
- Åtkomstpunkt Airlive
- Åtkomstpunkt Edimax
- Åtkomstpunkt Renkforce
- Åtkomstpunkt Sitecom
- Åtkomstpunkt TP Link
- Åtkomstpunkt Fortinet
- Åtkomstpunkt Totolink
- Åtkomstpunkt Cisco
- Åtkomstpunkt Engenius
- Åtkomstpunkt Netis
- Åtkomstpunkt Digitus
- Åtkomstpunkt Draytek
- Åtkomstpunkt Linksys
- Åtkomstpunkt Buffalo
- Åtkomstpunkt Dahua Technology
- Åtkomstpunkt Netgear
- Åtkomstpunkt LevelOne
- Åtkomstpunkt Dell
- Åtkomstpunkt Planet
- Åtkomstpunkt ZyXEL
- Åtkomstpunkt Zebra
- Åtkomstpunkt D-Link
- Åtkomstpunkt Aruba
- Åtkomstpunkt Tenda
- Åtkomstpunkt Ubiquiti Networks
- Åtkomstpunkt Trendnet
- Åtkomstpunkt Mikrotik
- Åtkomstpunkt EQ3
- Åtkomstpunkt Hawking Technologies
- Åtkomstpunkt INCA
- Åtkomstpunkt Moog
- Åtkomstpunkt Moxa
- Åtkomstpunkt StarTech.com
- Åtkomstpunkt Advantech
- Åtkomstpunkt Intellinet
- Åtkomstpunkt SMC
- Åtkomstpunkt Aerohive
- Åtkomstpunkt V7
- Åtkomstpunkt Media-tech
- Åtkomstpunkt NUVO
- Åtkomstpunkt Cudy
- Åtkomstpunkt IP-COM
- Åtkomstpunkt Meru
- Åtkomstpunkt Amped Wireless
- Åtkomstpunkt Cambium Networks
- Åtkomstpunkt 3Com
- Åtkomstpunkt AMX
- Åtkomstpunkt Ruckus Wireless
- Åtkomstpunkt Bintec-elmeg
- Åtkomstpunkt Mach Power
- Åtkomstpunkt Brocade
- Åtkomstpunkt ICC
- Åtkomstpunkt Insteon
- Åtkomstpunkt Juniper
- Åtkomstpunkt Comtrend
- Åtkomstpunkt Premiertek
- Åtkomstpunkt Extreme Networks
- Åtkomstpunkt Atlantis Land
- Åtkomstpunkt Mojo
- Åtkomstpunkt FlyingVoice
- Åtkomstpunkt Luxul
Nyaste Åtkomstpunkt Manualer
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
18 Oktober 2024
18 Oktober 2024
18 Oktober 2024
14 Oktober 2024
13 Oktober 2024
12 Oktober 2024
11 Oktober 2024