Lancom R&S UF-T60 Bruksanvisning
Lancom
Brandvägg (hårdvara)
R&S UF-T60
Läs nedan 📖 manual på svenska för Lancom R&S UF-T60 (2 sidor) i kategorin Brandvägg (hårdvara). Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
T E C H N I C A L D A T A
Hardware
Power supply External power supply 2x 12 –36 V
Max. power consumption 40 W
Operating environment Temperature range -20–70 °C; humidity 5–90 %, non-condensing
Housing Robust metal housing with mounting accessories for control cabinet mounting;
Network connections on the front side
Fans None
Dimensions (mm) 68.4 x 130 x 150 (W x H x D)
Interfaces
ETH 5x 10 / 100 / 1000 Mbps Gigabit Ethernet ports
SFP 2x SFP ports
USB 2x USB 3.0 ports
Console 1x RJ45 configuration interface
Power supply 1x 4-pin terminal block connector for connecting the power supply
GPIO 1x 5-pin terminal block connector
Declaration of Conformity
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in
compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of
the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc
Package contents
Documentation Quick Reference Guide (DE/EN), Quick Install Guide (DE/EN), Service & Support Guide (DE/
EN)
Accessories DIN rail mounting accessories
M O U N T I N G A N D C O N N E C T I N G T H E D E V I C E
LANCOM R&S®UF-T60
Quick Reference Guide
C ud eadylo -r
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document
contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111998/07/21
4Please observe the following when setting up the device
AThe mains plug of the device must be freely accessible.
ADo not rest any objects on top of the device and do not stack multiple devices.
AKeep the device’s ventilation slots clear of obstruction.
AMount the device in a free slot of an appropriate control cabinet using the enclosed DIN rail mounting
material.
Before initial startup, please make sure to take notice of the information regarding the intended use under !
www.lancom-systems.com/safety
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
a b LEDs HDD / Power
HDD off No HDD read / write access
HDD green HDD read / write access
POWER off Device switched off
POWER blue Device ready and accessible
e f LEDs ETH5 - ETH6 - SFP
e LEDs - Link detection
Off No link detected
Green, permanently Link detected
f LEDs - Link activity
Off no link detected
Green, permanently Link detected, no port activity
Green, blinking Link detected, port activity
c d LEDs ETH0 - ETH4 - TP Ethernet
c LEDs - Link speed
Off Link speed 10 Mbps
Green, permanently LinkSpeed 1000 Mbps
Orange, permanently Link speed 100 Mbps
d LEDs - Link activity
Off no link detected
Green, permanently Link detected, no port activity
Green, blinking Link detected, port activity
a5-pin GPIO terminal block connector (TTL level)
For connecting DIO_PWR, DIO_GND, GPO0, and GPI0
bUSB 3.0 interfaces
Interfaces for reinstallation of the device software.
Not necessary for initial commissioning.
cTP Ethernet interfaces ETH0 - ETH4
Connect the ETH0 - ETH4 TP Ethernet interfaces to additional
network components using suitable Ethernet cables.
dSerial configuration interface RJ45 (CON)
Maintenance interface for expert configuration.
Not necessary for initial commissioning.
eSFP interfaces ETH5 - ETH6
Connect the ETH5 - ETH6 SFP interfaces to other network
components using suitable SFP modules.
f4-pin terminal block connector
For connecting the power supply 2x 12 – 36 V (SELV / PELV)
gPower button (device top)
Press the power button to start up the device.
To power off the device, press the power button for 5 seconds.
hReset button (device top)
Short press - device restart
a
b
c d
c
e
f
ab
e
c
d
c
d
f
e
f
Produktspecifikationer
| Varumärke: | Lancom |
| Kategori: | Brandvägg (hårdvara) |
| Modell: | R&S UF-T60 |
Behöver du hjälp?
Om du behöver hjälp med Lancom R&S UF-T60 ställ en fråga nedan och andra användare kommer att svara dig
Brandvägg (hårdvara) Lancom Manualer
1 April 2025
1 April 2025
1 April 2025
1 April 2025
31 Augusti 2024
29 Augusti 2024
28 Augusti 2024
25 Augusti 2024
Brandvägg (hårdvara) Manualer
- Brandvägg (hårdvara) HP
- Brandvägg (hårdvara) Allied Telesis
- Brandvägg (hårdvara) Fortinet
- Brandvägg (hårdvara) Cisco
- Brandvägg (hårdvara) ZyXEL
Nyaste Brandvägg (hårdvara) Manualer
29 Mars 2025
22 December 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
23 September 2024
19 September 2024
19 September 2024
15 September 2024