Lascar Electronics EL-USB-5 Bruksanvisning

Läs nedan 📖 manual på svenska för Lascar Electronics EL-USB-5 (6 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/6
EL-USB
Quick Start Guide
DOWNLOAD AND INSTALL SOFTWARE USING THE SOFTWARE
Windows™ 7/8/10 (32 & 64bit)
Visit and click ‘Download’.www.lascarelectronics.com/software
.Insert the data logger into an available USB port on your PC.
.Double click on the EasyLog USB icon on your
Windows™ desktop. This will load the conguration
software. Click ‘Set up and start the USB data
logger’ and follow the set-up wizard.
.When setup is complete, the data logger should be removed
from the USB port. Do not leave your data logger in the
USB port for extended periods as this will cause some of
the battery capacity to be lost (with the exception of
EL-USB-1-RCG).
.You can also download the data from a logger that has been
recording or view previously saved data from the software.
Before using the data logger you will need to insert the 3.6V 2/3AA High
Temperature battery provided, following the instructions below.
1 2
3 4
EL-USB-1 PRO
EL-USB-1-RCG
The EL-USB-1-RCG’s battery is preinstalled. To charge the battery, connect
to a USB port until the green LED shows. The rechargeable battery should
only be replaced by an authorized supplier.
REPLACING YOUR DATA LOGGER’S BATTERY
3 4
1 2
Your data logger is provided with a 3.6V 1/2AA battery already installed. You
can change the battery by following the instructions below.

Produktspecifikationer

Varumärke: Lascar Electronics
Kategori: Inte kategoriserad
Modell: EL-USB-5

Behöver du hjälp?

Om du behöver hjälp med Lascar Electronics EL-USB-5 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Lascar Electronics Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer