Lasko 1000 Bruksanvisning

Lasko Luftfuktare 1000

Läs nedan 📖 manual på svenska för Lasko 1000 (2 sidor) i kategorin Luftfuktare. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

CAUTION: DO NOT ll unit before

assembling.

1. Remove Water Jug then Upper

Housing from base of Unit.

(Figure 1)

2. Lay base of Unit on its side so the

bottom of the unit is facing you.

3. Fully insert the four Castors into

the Holes in the bottom of the

Unit. (Figure 2)

Congratulations on your purchase of the evaporative High

Performance Digital Recirculating Humidier. Featuring

the unique use of pump driven water circulation, this unit

provides exclusive features that no other humidiers offer.

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT INFORMATION

and FEATURES

Your Recirculating Humidifier is an EVAPORATIVE TYPE

HUMIDIFIER. This means that the air being drawn through the

moistened filter naturally evaporates the water and disperses

INVISIBLE MOISTURE into the air. This type of humidier DOES

NOT PRODUCE MIST, WATER DROPLETS, STEAM OR EXCESSIVE

CONDENSATION associated with other types of humidiers.

EXCESSIVE HUMIDITY CAN OFTEN LEAD TO UNANTICIPATED

PROBLEMS. Air containing water droplets or mist can create a good

habitat for the growth of mold and mildew.

Misting units often oversaturate the air, while the Lasko

Recirculating Humidier reaches a maximum humidity output level

without oversaturating the air. With a properly operating Evaporative

Humidier, the evaporation rate increases naturally when the air is dry.

When the humidity in your home is high, moisture output automati-

cally decreases to help prevent damaging condensation.

The Watershow Viewing Window provides a visible way for you to

know that your Recirculating Humidier is operating. As air passes

through the lter, the humidity in the room will increase, and the

water level in the Unit will begin to decrease.

Unlike misting humidifiers, the Evaporative Filter in your

Recirculating Humidier also traps unwanted minerals that reside

in normal tap water. This ltering also assures there is NO WHITE

DUST dispersed into the air.

NOTE: A few droplets of water may be present in your humidier

as a result of our quality testing prior to packaging and shipment.

When using electrical appliances, especially where children are

present, basic precautions should always be followed in order

to reduce the risk of re, electric shock and injury to persons.

Including the following:

1. To prevent possible electrical shock, always turn the unit

off and unplug before lling, servicing or moving.

2. Always place Humidier on a stable, at, level surface. Locate

Power Cord so the Humidier or other objects are not resting on

it. Keep the Cord away from room trafc.

IMPORTANT SAFETY INSTRUCTIONS

DO NOT pour water into Grill. DO NOT spill water on Control Panel.

Water should only be poured into the Unit using the Jug.

Rev. C 5/12 1 2084400

3. Do not place Humidier near a heat source such as stoves,

radiators or heaters.

4. This appliance is equipped with a polarized plug (one prong is

wider than the other). To reduce the risk of electrical shock, this

plug is designed to t in a polarized outlet only one way. If plug

does not t, contact a qualied electrician. Do not attempt to

defeat this safety feature.

5. Never tilt or attempt to move the Humidier while it is operating.

6. Always direct air ow away from walls or furniture. Excessive

moisture may cause damage.

7. Humidiers require regular cleaning to maintain proper operat-

ing conditions. Refer to section for proper cleaning CLEANING

procedures.

ASSEMBLY

4. Replace Upper Housing, then

Water Jug into Unit.

Figure 2

Hole

Castor

Rev. C 5/12 4 2084400

TROUBLE PROBABLE CAUSE SOLUTION

Fan not working or • No power Make sure Unit is plugged in

Humidier doesn’t Check that the Power Switch is On

turn on • Humidistat not set correctly Set Humidistat to higher humidity level

• Top of Humidier not seated properly Make sure top is properly seated on Base

on Base (Unit is equipped with an

automatic shut off)

• Filter Holder not assembled properly Make sure Filter Holder is seated in place

or is missing (Unit is equipped with an

automatic shut off)

Water leaking • Base is overlled Reduce water level in Base

• Filter is old and dirty Replace Filter

Foul odor • Filter needs to be replaced Replace Filter

• Base needs to be cleaned Follow Instructions in CLEANING section

• Whole Humidier needs cleaning Follow Instructions in CLEANING section

Filter discoloration • Mineral deposits in water Replace Filter

Water discoloration • Humidier needs to be cleaned Follow Instructions in CLEANING section

• Hard water - Iron in water Use ltered or distilled water

• Some humidier additives can cause

discoloration

Lights do not work:

Humidistat Light Off, • Humidity is not yet achieved in room Allow Humidier to continue running

Power Light On

Power Light Off, • Room has reached desired Set Humidity Knob for more Humidity

Humidistat Light On Humidity level

No water show • No water in Unit Rell Unit

• Hose not connected to Pump Connect Hose to Pump

• Hose not connected to Water Show Connect Hose to Water Show

TROUBLE SHOOTING GUIDE

Model 1000

EVAPORATIVE HIGH PERFORMANCE

DIGITAL RECIRCULATING HUMIDIFIER

Figure 1

LASKO PRODUCTS, INC. LIMITED WARRANTY

(VALID IN THE USA, ITS TERRITORIES, AND CANADA ONLY)

WHAT THIS WARRANTY COVERS: This product is warranted against defects in workmanship and/or materials.

HOW LONG THIS WARRANTY LASTS: This warranty extends only to the original purchaser of the product and lasts for one (1) year from the

date of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.

WHAT LASKO WILL DO: During the warranty period, Lasko will, at its sole option, repair or replace any part or parts that prove to be defective

or replace the whole product with the same or comparable model.

WHAT THIS WARRANTY DOES NOT COVER: This warranty does not apply if the product was damaged or failed because of accident, improper

handling or operation, shipping damage, abuse, misuse, unauthorized repairs made or attempted. This warranty does not cover shipping costs

for the return of products to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko following warranty repairs or

replacement.

ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF

MERCHANTABILITY), LAST ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE OR UNTIL THE ORIGINAL PURCHASER OF THE

PRODUCT SELLS OR TRANSFERS THE PRODUCT, WHICHEVER FIRST OCCURS AND IN NO EVENT SHALL LASKO’S LIABILITY UNDER

ANY EXPRESS OR IMPLIED WARRANTY INCLUDE (I) INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER, OR

(II) REPLACMENT OR REPAIR OF ANY HOUSE FUSES, CIRCUIT BREAKERS OR RECEPTACLES. NOTWITHSTANDING ANYTHING TO THE

CONTRARY, IN NO EVENT SHALL LASKO’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY EXCEED THE PURCHASE PRICE OF

THE PRODUCT AND ANY SUCH LIABILITY SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD.

Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or

consequential damages, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights. You may also

have other rights which vary from state to state and province to province. Proof of purchase is required before a warranty claim will be accepted.

CUSTOMER SERVICE:

Toll-Free (800) 233-0268. Email: producthelp@laskoproducts.com

Our Customer Service team is available to assist you with product and service questions, and replacement parts.

They can be reached Monday through Friday, 8am-5pm Eastern. Please have your model number available, as

well as the type and style (located on the underside of your product).

Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380

(Please do not send product to this location) www.laskoproducts.com

Water Jug

Upper

Housing

Base

CAUTION: Do not pour water through

the Exhaust Grill on the Upper Housing.

Doing so may cause damage and personal

injury.

CAUTION: Unplug Unit when lling. •

• Always place Humidier on a rm level surface.

Locate the Power Cord so the Humidier is

not resting on it, and is away from trafc.

• Be careful not to overll.

• Do not pour water through Exhaust Grill,

doing so may cause damage and personal injury.

• Take extra care to prevent water spillage

that may damage furniture or flooring. The

manufacturer will not accept responsibility for

damage to property caused by water spillage.

• Always be sure the Power Knob is in the OFF

(0) position when plugging Humidier into a

grounded 120 volt AC wall outlet.

• To prevent risk of electrical shock and injury to

persons, do not plug Humidier into electrical

outlet with wet hands.

1. It is recommended that all Humidiers be cleaned prior to use.

Please read CLEANING section for Base and Jug cleaning.

2. Use the convenient Carrying Handle to bring Water Jug to a fau-

cet. Remove the Water Jug Cap by turning it counterclockwise.

Fill the Water Jug with cool tap water. Never use hot water.

Replace the Jug Cap by turning it clockwise, until cap is fully

sealed on gasket. Do not over tighten. Be sure cap is fully sealed

on gasket. (Figure 3)

When the Jug is replaced back into the Base it will quickly empty

to ll Base.

NOTE: While carrying lled Water Jug back to the Humidier, hold

the Handle with one hand, while supporting bottom of Water Jug

with other hand.

3. Place the Water Jug securely in the Base. If positioned

properly, water will quickly pour into Base and automatically

stop when reaching Base Capacity.

4. When the Unit is full, some water will remain in the Jug. Rell

Water Jug if empty.

5. Even though your Humidier can produce approximately 12

gallons in a 24 hour period*, the water capacity (amount

of water the Humidier will hold at one time) is 6 gallons.

FILTER CARE

Rev. C 5/12 2 2084400 Rev. C 5/12 3 2084400

The presence of water ow in the Water Show Window indicates

the circulation of water to the Filter. (Figure 4)

1. Clean and dry Humidier thoroughly per the CLEANING

section above. Do not leave any water in the Unit when storing.

2. Dispose of the Evaporative Filter Pad. Do not store used

Evaporative Filter Pad in the Humidier.

3. Place Humidier back into its carton and store in a cool dry

place.

OFF-SEASON STORAGE

The Filter inside your Humidier plays a very important part in its

operation. In order to maintain peak performance, it is recommended

to use LASKO REPLACEMENT FILTERS.

CAUTION: To prevent electric shock, always turn Power

Control Knob to OFF position and unplug before servicing.

1. To replace the Evaporative Filter Pad, remove the Jug and Upper

Housing from the Base. Be careful not to let excess water from

pump spill onto furniture or ooring.

2. Remove Evaporative Filter Pad Holder from Base and inspect

Small Water Drip Holes for any blockage. (Figure 6)

3. To open the Filter Holder apply outward pressure to the two

snaps and it will hinge open. Remove used Filter from Holder

and discard. (Figure 7)

Figure 6

4. Insert new Filter into Holder, snap closed, and reinstall Holder

into Base. (Figure 6) The Filter will only t into the Holder one

way. Make sure the Rounded side of the Filter Holder is facing

Figure 7

outward. Replace Upper Housing, then Water Jug into Base.

5. To increase the life of your Filter Pad turn Filter around (so the

bottom of Filter is now at the top).

6. Filter life may be extended by cleaning the

Filter in a 20% vinegar solution. To clean

Filter, mix one part undiluted vinegar with

four parts warm tap water. Soak the Filter

in this solution for 20 minutes, rinse Filter

thoroughly with warm water to remove

vinegar odor.

DO NOT FLATTEN, SQUEEZE OR TWIST FILTER WHEN CLEANING

7. Discoloration of the Evaporative Pad is normal after

extended use. The discoloration is caused by mineral deposits

CLEANING

in the water, and the degree of discoloration will vary depend-

ing upon the amount of mineral content in the water. When

the Filter surface area is thoroughly discolored, or you notice

reduced water usage, it is a good indicator that the Filter

Pad needs to be replaced. The Evaporative Pad should be

replaced at least once every season.

The Replacement Filter to be used in this unit is:

The Lasko Replacement Evaporative Pad Model CHF 50

(Available Separately)

Filter Pad Holder

Base

Drip Holes

Snaps

Evaporative Filter Pad

Model CHF 50

Figure 3

Carry Handle

Water Capacity of Unit is 6 Gallons

1. Regular cleaning is necessary to ensure proper and

efcient operation. The frequency of cleaning depends on the

amount of impurities which may be found in the water or how

often the Humidier is in operation. In either instance, it is rec-

ommended that the Humidier be cleaned at least once a week.

NOTE: Unscrew bottom of Water Jug for easy cleaning. (Figure 8)

CAUTION: Make sure bottom of Jug is securely fastened to Jug

before reinstalling into Base.

2. TO DESCALE BASE, JUG AND DRIP SHIELD: Mix one part un-

diluted white vinegar with four parts warm tap water. Let vinegar

solution stand for 20 minutes then wipe away any scale buildup

using a soft brush or cloth. Do not use soap or detergents and

never use an abrasive cleaner.

3. DISINFECTTO BASE, JUG AND DRIP SHIELD: Fill Jug with 1

teaspoon of chlorine bleach and 1 gallon of water. Let solution

stand for 20 minutes. Carefully empty Jug and rinse well with

water until bleach smell is gone.

4. Commercial “Descalers” and “Bacteriostats” are available at

your local home improvement center.

5. Do not operate Humidier when there is still cleaner in the

water.

1. Turn fan speed knob to desired speed.

- For fast humidification of a large room or house,

approximately 12 gallon per day.*

- For normal operation.

- For quiet, night time operation or after desired moisture

level is reached.

* Calculations based on ambient room conditions of 70° F

and 30% relative humidity in a room of average insulation.

The current room humidity display will set itself 10 seconds after

the power cord is plugged into a 120 V outlet.

2. Push the humidity set button up or down, to adjust the humidity

to the desired level. The desired humidity range is 25% to 95%.

The desired humidity level is displayed in small numbers and the

current room humidity % is displayed in large numbers.

Once the current room humidity level reaches the desired hu-

midity level, the fan will turn off and the humidity indicator light

will come on. This light indicates that the humidier is still on

and will again start when the current room humidity level falls

below the desired set level.

If the current room humidity drops below 25% or goes above

95%, the display will blink off and on until the current room

humidity is within the 30% to 90% range.

OPERATION

FILLING

Figure 4

Figure 5

1. Fan Speed Knob

2. Humidity Set Button

3. Desired Humidity %

4. Current Room Humidity %

Humidity Indicator Light

- Light comes on when desired humidity

level is the same or lower than current

room humidity while the speed knob

is in the on position.

Figure 8

Jug Cap

(Jug Holds 2-1/4 Gallons)

(Base Holds 3.75 Gallons)

Produktspecifikationer

Varumärke:	Lasko
Kategori:	Luftfuktare
Modell:	1000

Behöver du hjälp?

Om du behöver hjälp med Lasko 1000 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Luftfuktare Lasko Manualer

Lasko 1000 Bruksanvisning

4 September 2024

Lasko Ultrasonic Travel UH150 Bruksanvisning

4 September 2024

Luftfuktare Manualer

Nyaste Luftfuktare Manualer

Clean Air Optima CA-607W Bruksanvisning

27 Oktober 2024

Woods SW42FM Bruksanvisning

26 Oktober 2024

Braun VH 1700E Bruksanvisning

24 Oktober 2024

Philips HU3916 Bruksanvisning

24 Oktober 2024

Proklima HF-106631.2 Bruksanvisning

20 Oktober 2024

Stadler Form Fred Bruksanvisning

18 Oktober 2024

Olimpia Splendid Aquaria Silent 15 P Bruksanvisning

17 Oktober 2024

ETA Airo 628 90000 Bruksanvisning

17 Oktober 2024

Scarlett SC-985 Bruksanvisning

15 Oktober 2024

Clean Air Optima CA-703 Bruksanvisning

15 Oktober 2024