LC-Power LC-CC-124-ARGB-TB Bruksanvisning

LC-Power Processorkoeler LC-CC-124-ARGB-TB

Läs nedan 📖 manual på svenska för LC-Power LC-CC-124-ARGB-TB (1 sidor) i kategorin Processorkoeler. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
Step 1- Installation
1. Remove the transparent sheet from the cooler and the CPU bottom.
Now spread some thermal paste evenly on the CPU.
2. Clip two sides to each corresponding bracket.
3. Connect the cooler fan and the illuminated outer ring to the mainboard.
Step 2- Fan and wire connection
1. Connect the 4pin PWM connector to the mainboard -> “CPU FAN”
2. Connect the 3 pin digital RGB fan cable (B) with the mainboard.
Consult your mainboard manual to locate the position of the RGB connector on
your mainboard. Colours and modes can be controlled via the mainboard's RGB
software (digital RGB/ARGB).
B
CD
A
LGA775 LGA115X
CPU thermal paste
CPU
Intel
AMD AMD AM2/AM2+/AM3/AM3+/AM4 FM1/FM2/
TM
Silent Power Electronics GmbH,
Formerweg 8, 47877 Willich,
Germany, www.lc-power.com,
Email: support@lc-power.com
TM
LC-CC-124-ARGB-TB
thermal paste
3. Some mainboards need the digital RGB adapter cable (D) which must be connected
between the 3 pin RGB fan cable (B) and the mainboard itself.
So connect the adapter (C) to the 3 pin digital RGB fan cable (B). And now (D) to
the mainboard.

Produktspecifikationer

Varumärke: LC-Power
Kategori: Processorkoeler
Modell: LC-CC-124-ARGB-TB

Behöver du hjälp?

Om du behöver hjälp med LC-Power LC-CC-124-ARGB-TB ställ en fråga nedan och andra användare kommer att svara dig




Processorkoeler LC-Power Manualer

Processorkoeler Manualer

Nyaste Processorkoeler Manualer