Lenco L-69 Bruksanvisning

Läs nedan 📖 manual på svenska för Lenco L-69 (36 sidor) i kategorin Skivspelare. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/36
Instruction
Anleitung
Instrucciones
Mode d’emploi
Instructies
Direct encoding turntable
Plattenspieler mit Direktaufnahmefunktion
Giradiscos de codificación directa
Tourne-disque à encodage direct
Direct encoding draaitafel
L-69
For information and supports: www.lenco.eu
Zur Information und Unterstützung, www.lenco.eu
Para obtener información y apoyo, www.lenco.eu
Pour information & support technique, www.lenco.eu
Voor informatie en ondersteuning, www.lenco.eu
OFF PH
USB
USB REC SD
REC
SKIP -UP
SKIP -DN
MODE
F-UP
STOP/S D
ID3/PR OG
PLAY/PAUSE
33
45
UP
DOWN
STOP
CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may resulte in hazardous
radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
PRECAUTIONS FOR USE
Installation
• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.
• Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
LOCATION OF CONTROLS
1) Dust cover
2) Spindle adaptor
3) AC cord
4) Audio cable
5) Pick-up holder
6) UP/DOWN selector
7) 33/45 rpm speed selector
8) REC button
9) SKIP - UP button
10) OFF/USB/PH selector
11) MODE button
12) SKIP - DN button
13) F - UP button
14) ID3/PROG button
15) STOP/SD button
16) PLAY/PAUSE button
17) LCD display
18) SD slot
19) USB slot
20) STOP button
CONNECTION
Audio connection
The record player has an inbuilt preamplifier and can therefore be connected directly to the Line In / Aux input
on a hi-fi system.
• Connect the audio cable(4) to the Line In / Aux input on your hi-fi system
(red plug = right channel; white plug = left channel).
Mains connection
1. Connect the power cord to AC outlet
2. switch the OFF/USB/PH Selector to “ PH “ function. if ”PHONO” is displayed on the LCD display, it’s mean the
power supply is normal. now your system is ready to play the music.
PHONO
NOTED:
- remove the stylus protector.
- be sure that the tone arm is being detached from the tone arm rest before operating and re-secured again afterwards.
1. Slide the OFF/USB/PH selector(13) to “PH” function, “PHONO” is displayed on the LCD display
2. Set the 33/45 rpm speed selector(7) to the proper position depending on the record to be played.
3. Place the record on the platter (use the spindle adaptor if required).
4. Slide the UP/DOWN selector(6) to “UP” position
5. Lift the tone arm from the rest and slowly move it to the record side. the platter will start to rotate.
6. Place the tone arm to the desired position of the record, Slide the UP/DOWN selector(6) to “DOWN” position
7. Adjust the volume to the desired level on your hi-fi system.
8. At the end of record, the platter will automatically stop rotating, the tone arm will automatically return to the rest.
9. To stop manually, press the STOP Button(20) directly, or lift the tone arm from the record and return it to the rest
E - 1
1
2
3
4
5
6
7
8
910
11
12
13
14
15
16
17
18
19
20
OFF PH
USB
USB REC SD
REC
SKIP-UP
SKIP-DN
MODE
F-UP
STOP/SD
ID3/PROG
PLAY/PAUSE
33
45
UP
DOWN
STOP
PHONO ENCODING
1. Insert the USB flash disk or SD card into appropriate slot(18)/(19).
2. Slide the OFF/USB/PH selector(13) to “PH” function, “PHONO” is displayed on the LCD display
3. select and playback at phono for the track which will be assigned to the encoded sounds on the USB flash disk
or SD card.
4. Press once the “REC” button(10), the LCD display shows “USB” flashing/ “CARD” flashing. The encoding will starting
after 10 seconds and shows “PHONO” with flashing words “USB” / “CARD” lower left corner of the LCD display.
NOTED: Press twice the “REC” button(10) directly, the encoding will starting immediately.
5. To stop encoding, press “STOP/SD” button(15).
Re-mark: Do not interrupt during the phono recording process until completed. Otherwise,recording function
cannot be performed.
PLAYBACK OF MP3/WMA SONGS VIA USB FLASH DISK OR SD CARD STORAGE MEDIA
1. Insert the USB flash disk or SD card into appropriate slot(18)/(19).
2. Slide the OFF/USB/PH selector(13) to “USB” function, the unit will automatically read the total folders and the number
of the total tracks.
3. Playback will start by pressing “PLAY/PAUSE” button(16). playback starts with the first track, the LCD display shows
the current track number and the song “WMA” or “MP3” format .
4. To interrupt playback, press “PLAY/PAUSE” button(16). the time elapsed indicator will flash.
5. To resume playback, press the “PLAY/PAUSE” button(16) again.
6. To stop playback, press stop by using the “STOP/SD” button(15).
TRACK SKIP
“SKIP - DN” button(14) - press once to return to the beginning of the current track. press again quickly to back up
another track.
“SKIP - UP” button(12) - press once to skip to the next track. press again to move forward another track.
“F - UP” button(9) - allow you to switch between the folder while the playback, hold either “SKIP - DN”(14) or
“SKIP - UP”(12) button to audibly search the current track in the desired direction.
ID3 Tag Support - allowing you to conveniently view the artist name and the title of the track currently being played.
To enable ID3 functions by press the “ID3/PROG” button(8) during the playback mode,
the “ID3 ON” is displayed on the LCD display.
To cancel ID3 functions by press the “ID3/PROG” button(8) again.
REPEAT/INTRO/RANDOM MODE
(1) REPEAT 1 (2) REPEAT ALL TRACKS (3) REPEAT 1 FOLDER
(6) OFF MODE (5) RANDOM (4) INTRO PLAY
PLAY MODE INDICATOR ON LCD DISPLAY
REPEAT SINGLE TRACK
REPEAT ALL TRACKS ALL
RELEAT SINGLE FOLDER
INTRO PLAY MODE INTRO
RANDON MODE RANDOM
OFF MODE -------------------
REPEAT PLAY
1. When the playback, if you desire to repeat the same track only, press the “MODE” button(11) on the unit .
2. To repeat all disc, press the “MODE” button(11) twice and the “ALL” display will light up.
3. To repeat folder, press the “MODE” button(11) thrice and the ”display will light up.
4. To cancel repeat play, press the “STOP/SD” button(15) or press the “MODE” button(11) repeatedly until the repeat
indicator disappears.
INTRO PLAY
Introduce all songs by playing 10 seconds of each track.
1. Either in stop or playback mode, press the “MODE” button(11) four times, the “INTRO” indicator will light up..
2. To cancel intro play, press the “STOP/SD” button(15) or press the “MODE” button(11) repeatedly until the intro indicator
disappears.
RANDOM PLAY
1. Either in stop or playback mode press the “MODE” button(11) five times, the “RANDOM” indicator will light up.
2. In the stop mode, press the “PLAY/PAUSE” button(16) to start playing. the tracks will be played randomly.
3. To cancel random play, press the “STOP/SD” button(15) once again until the “RANDOM” indicator disappears.
E - 2

Produktspecifikationer

Varumärke: Lenco
Kategori: Skivspelare
Modell: L-69

Behöver du hjälp?

Om du behöver hjälp med Lenco L-69 ställ en fråga nedan och andra användare kommer att svara dig




Skivspelare Lenco Manualer

Skivspelare Manualer

Nyaste Skivspelare Manualer