Liberty Garden 708 Bruksanvisning

Liberty Garden Trädgårdsslang 708

Läs nedan 📖 manual på svenska för Liberty Garden 708 (6 sidor) i kategorin Trädgårdsslang. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/6

Mod ive

Wall Mount Hose Reel

Owner’s Ma alnu

™

VISIT OUR WEBSITE: W . .COM WW LIBERTYGARDENPRODUCTS

OR CALL US TO FREE AT 1-866-820-5805, MONDAY - FRIDAY 9 A.M. - 5 P.M.LL

IMPORTANT READ THE OWNER’S MANUAL BEFORE ASSEMBLING :

1161 SOUTH PARK DRIVE, RNERSVILLE NC 4KE 2728

LIBERTY GARDEN PRODUCTS, INC.

TOOLS REQUIRED

PARTS LIST

Estimated Assembly time: 5 minutes (Not including mounting)

A. Crank handle (1) B. Allen screw (1)

D. Hose reel (1)

(Not pictured)

1. Align the holes in the crank handle with crank handle shaft. (A)

Tighten the crank handle allen screw using the Allen wrench (B)

provided. Do not over tighten crank handle screw. Figure 1

2. Attach the leader hose to the swivel connector.(C)

Figure 2

Note: If you have trouble with the swivel turning and kinking the leader

hose, try spraying a silicone spray inside to lubricate the O-rings. The

o-rings located inside the swivel may be dry. You can reach the O-rings

by taking off the retaining clip or spraying inside the opening of the

swivel.

3. Attach your garden hose to the hose connection on the hose

reel spool . (D) Figure 3

FIGURE 2

ASSEMBLY INSTRUCTIONS

Pliers, Adjustable Wrench, Drill (Not Included) & Allen Wrench (Included)

FIGURE 3

C. Leader hose (1)

FIGURE 1

IMPORTANT: LAY OUT ALL PARTS AND FASTENERS. MAKE SURE ALL PARTS ARE ACCOUNTED FOR. IF ANY PART IS

MISSING PLEASE CONTACT LIBERTY GARDEN PRODUCTS AT

1-866-820-5805, MONDAY - FRIDAY 9 A.M. - 5 EST.

DO NOT CONTACT THE RETAILER.

YOU CAN ALSO VISIT OUR WEBSITE, WWW.LIBERTYGARDENPRODUCTS.COM,

FOR MORE INSTRUCTIONS PICTURES AND HELPFUL HINTS.

INSTALLATION

This hose reel MUST be mounted to a solid masonry wall or to wall studs

TIP: Remember to use the correct size and quantity of hardware to properly support the

total weight of the unit. A standard 100' length of garden hose weighs approximately 15 lbs.

Filled with water, the additional weight can exceed 20 lbs. The mounting hardware must be

able to support the combined weight of the unit, garden hose, plus water.

NOTE: The following hardware (not included)

is recommended for installation.

1. BRICK OR MASONRY ANCHOR SLEEVES:

(4) 7 or 8 mm x 60 mm masonry wall anchors

(5/16” x 2 1/2”)

(4) Anchor sleeves

(4) Washers

(4) Lock washers

(4) Nuts

NOTE: The following hardware (not included)

is recommended for installation.

WOOD SCREWS:

(4) 7 or 8 mm x 60 mm wood screws

(5/16” x 2 1/2”)

(4) Washers

Mounting Hole

Size: 5/16”

Mounting Hole

Size: 1/4”

Mounting Hole

Size: 1/4”

NOTE Drill hole :

diameters may vary based on

anchor sleeve, concrete screw and

wood screw manufacturer.

Check product recommendations

before drilling holes.

NOTE: The following hardware (not included)

is recommended for installation.

2. BRICK OR MASONARY SCREWS:

(4) 7 or 8 mm x 60 mm masonry screws

(5/16” x 2 1/2”)

(4) Washers

• Position and hold your hose reel against the brick masonry wall

at a convenient height. Mark the position of each suspension

hole on the wall. Remove the hose reel.

• Using a hammer drill l, drill holes 5/16” in diameter and

2 1/2” deep at the marked positions on the wall.

• Insert the masonry wall anchors into the anchor sleeve. Next,

insert the anchor and sleeve into the drilled holes until the steel

sleeve is completely in the wall.

• Place the hose reel on the masonry wall anchors.

• Install a washer, lock washer, and nut over each wall anchor

and tighten securely.

• Position and hold your hose reel against the brick masonry wall

at a convenient height. Mark the position of each suspension

hole on the wall. Remove the hose reel.

• Using a hammer drill, drill pilot holes 1/4” in diameter and 2 1/2”

deep at the marked positions on the wall.

• Align the hose reel suspension holes with the pilot holes.

• Attach the hose reel to the wall using the concrete screws with

washers and tighten securely.

• Using a stud finder locate the wood studs on your wall.

• Position and hold your hose reel against the wood wall at a convenient height.

Mark the position of each suspension hole on the wall. Remove the hose reel.

• Using an electric drill, drill pilot holes 1/4” in diameter and 2 1/2” deep at the marked

positions on the wall.

• Align the hose reel suspension holes with the pilot holes.

• Attach the hose reel to the wall using the wood screws with washers and tighten securely.

To learn more watch a video on our warranty and care section @ www.libertygardenproducts.com

Produktspecifikationer

Varumärke:	Liberty Garden
Kategori:	Trädgårdsslang
Modell:	708
Färg på produkten:	Aluminium, Black
Vikt:	4445 g
Höjd (min):	508 mm
Höjd (max):	1702 mm
Maximal viktkapacitet:	7.711 kg
Material:	Aluminium
Avsedd för:	Hand-camcorder
Förvaringsväska:	Ja
Längd hopfälld:	774.7 mm
Montage:	1/4"
Tiltvinkelområde:	-90 - 90 °
Antal ben/ben:	3 poot/poten
Antal bensektioner:	3
Spordiameter (max):	30 mm