Lindell Audio PeQ-501a Bruksanvisning

Lindell Audio Inte kategoriserad PeQ-501a

Läs nedan 📖 manual på svenska för Lindell Audio PeQ-501a (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

of this document may be reproduced in any form without explicit written consent from Lindell Audio. Lindell Audio is

a RAD Global Distribution company.

PeQ-501a

500-Series Equalizer

Specications

Power Requirements +/- 16V

Input Impedance 2.4 kΩ, op-amp balanced

Output Load Impedance 70 Ω transformer-balanced

Frequency Response +/- 1dB 20 Hz to 20 kHz

Dimensions Width:76 mm (3”)

Height: 178 mm (5.25”)

Depth: 229 mm (9”)

Weight 1.47 kg (3.25 lbs)

1. Read these instructions.

2. Keep these instructions

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus that produce heat.

9. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they

exit from the apparatus. If the power cord

becomes frayed, stop using immediately.

10. Use only attachments/accessories specied

by the manufacturer

11. Use only with a cart, stand, tripod, bracket

or table specied by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

12. Unplug this apparatus during lightning storms

or when unused for long periods of time.

13. Refer all servicing to qualied service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

14. This apparatus shall not be exposed to

dripping or splashing, and no object lled with

liquids, such as vases, shall be placed on the

apparatus.

15. Note that this apparatus is not completely

disconnected from the AC mains service when

the power switch is in the OFF position.

16. The mains plug or power inlet on the product

is used as the disconnect device, so the

disconnected device shall remain readily

operable when reconnected.

17. Any changes or modications not expressly

approved in this manual could void your

authority to operate this apparatus.

Important !

Be sure to only use the power connection

intended for your 500-series rack.

The triangular lightning ash icon is in-

tended to alert the user to the presence

of uninsulated, dangerous voltage within

Installation

1. Power off the 500-series rack

that the PeQ-501a is to be in-

stalled in.

2. Make sure nothing surrounds

the card edge connector on the

back of the PeQ-501a.

3. Carefully slide the PeQ-501a

into an empty slot in your

500-series rack

4. Ensure that the PeQ-501a edge

connector is installed secure-

ly into the connector on the

500-series rack

5. Install screws on the PeQ-501a

faceplate to secure the unit.

INITIAL SETUP:

Using balanced XLR cables, con-

nect the PeQ-501a’s inputs and outputs from your 500-series chassis

to your mixing bus or patch bay. Set the EQ button to the on position,

and apply power.

Basic Use

On the PeQ-501a, low-frequency options are present-

ed on the left of the control panel; high-frequency op-

tions are on the right.

Low-Frequency Controls (left)

1. CPS: (Cycles per second) Sets the operating fre-

quency of the unit’s low-frequency Boost and At-

ten controls.

2. Atten: Sets the amount of low shelf cut to be ap-

plied to the frequency set by the CPS switch.

3. Boost: Sets the amount of boost applied to the fre-

quency chosen via the CPS control.

High-Frequency Controls (right)

4. KCS: (Kilocycles per second) Sets the operating

frequency of the unit’s high-frequency Boost and

Atten controls.

5. Atten Sel: Sets the operating frequency of the

unit’s high-frequency Atten control.

6. Bandwidth: Sets the width of frequencies affect-

ed by the high-frequency Boost control. Left for

sharp, right for broad.

7. Atten: Sets the amount of attenuation applied to

the frequency set by the Atten Sel control.

8. Boost: Sets the amount of boost applied to the fre-

quency chosen via the KCS control.

9. EQ: Turns the unit on/off. Unit is more fun when

set to “on.”

Note: For proper performance, balanced

TRS must be used for all inputs and outputs.

Important Safety Instructions

the product’s enclosure that may be of

sufcient magnitude to constitute a risk of

electric shock.

The triangular exclamation point icon is

intended to alert the user to the presence

of important operating and maintenance

(servicing) instructions in the literature ac-

companying the product.

The PeQ-501a complies with all applicable

RoHS / WEEE European Union directives.

Do not attempt to service this unit yourself,

as it will void your warranty. Please check

your unit carefully upon receipt and return

to place of purchase immediately if there

are any problems with the product. After

that, the standard Lindell Audio 1 YEAR

warranty will apply to defects in materials

and workmanship.

International Service

For service or warranty assistance, please

contact the Lindell Audio distributor in your

country through the dealer from whom you

purchased this product.

Limited One-Year Warranty

Lindell Audio’s PeQ-501a is warranted by

Lindell Audio to be free from defects in ma-

terials and workmanship for the period of

ONE (1) YEAR to the original purchaser. In

the event of such defects, the product will

be repaired without charge or, at our op-

tion, replaced with a new one if delivered to

Lindell Audio prepaid, together with a copy

of the sales slip or other proof of purchase

date. The warranty excludes problems due

to normal wear, abuse, shipping damage

or failure to use the product in accordance

with the specications.

All parts and labor are covered under this

Limited Warranty. However, if it is deter-

mined by Lindell Audio that the device was

damaged or made defective through abuse,

we reserve the right to charge the customer

for the cost of the repair.

Lindell Audio shall not be liable for damag-

es based upon inconvenience, loss of use

of the product, loss of time, interrupted

operation or commercial loss or any other

damages, whether incidental, consequen-

tial or otherwise. This warranty gives you

specic legal rights, and you may have oth-

er rights, which will vary from state to state.

This warranty is not transferable.

PeQ-501a Features

• Extended high frequency range.: 1K, 1,5K, 2K, 3K,

4K, 5K, 8K, 10K, 12K, 14K, 16K

• Extended low frequency range: 20Hz, 30Hz, 60Hz,

100Hz, 150Hz

• Transformer balanced output

• Designed around vintage 1731 op-amp

• Hand-wound inductor

• All switched rotary controls

• Gold-plated PCB internals

• Real hardware bypass

The infamous low-end trick

Back in 1951, a classic EQ manual instructed users

with this note: “Do not attempt to boost and attenu-

ate simultaneously on the low frequencies.” And of

course, folks did exactly that to see what would hap-

pen.

Due to slight differences in the unit’s the boost and at-

tenuation curves, the result is not that the boost and

attenuation cancel each other out... it just so happens

that this approach can create an EQ curve that can be

very attering to kick drum sounds. Try it; this storied

studio secret is now yours!

Produktspecifikationer

Varumärke:	Lindell Audio
Kategori:	Inte kategoriserad
Modell:	PeQ-501a

Behöver du hjälp?

Om du behöver hjälp med Lindell Audio PeQ-501a ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Inte kategoriserad Lindell Audio Manualer

Lindell Audio LiNTEC Bruksanvisning

21 September 2024

Lindell Audio PeQ-501a Bruksanvisning

16 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024

Manhattan 461504 Bruksanvisning

27 Oktober 2024

Sungrow SG125HV Bruksanvisning

27 Oktober 2024

Schneider CCT724319 Bruksanvisning

27 Oktober 2024

Technoline WS 250 Bruksanvisning

27 Oktober 2024

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024

Kupper 12152 Bruksanvisning

27 Oktober 2024

JennAir CARBON24L Bruksanvisning

27 Oktober 2024

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024