Lindy BTA-30 Bruksanvisning

Läs nedan 📖 manual på svenska för Lindy BTA-30 (18 sidor) i kategorin Bluetooth-mottagare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/18
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (March 2014)
BTA-30
Bluetooth Audio Receiver with NFC
User Manual English
Benutzerhandbuch Deutsch
Manuel Utilisateur Français
Manuale Italiano
No. 20407
www.lindy.com
Tested to Comply with
FCC Standards
For Home and Office Use
User Manual English
Introduction
Thank you for purchasing the LINDY BTA-30 Bluetooth Audio Receiver with NFC. The BTA-30 adds Bluetooth
audio connection capabilities to HiFi, Headphones or speaker systems with 3.5mm inputs or Phono*. Compatible
with modern Bluetooth devices, and with the added benefit of NFC for easy pairing, the BTA-30 seamlessly
delivers audio from your smartphone, tablet or other Bluetooth enabled devices for playback directly on your audio
system.
Simple to set-up and with a maximum range of 10m, the BTA-30 is ideal for home & mobile use, helping you make
the most of your mobile audio experience.
*requires 35.mm to Phono cable, not included.
Package Contents
BTA-30 Bluetooth Audio Receiver with NFC
USB Micro-B cable
3.5mm stereo audio cable
LINDY Manual
Features
NFC Easy Pairing
3.5mm analogue audio output
Built in Microphone for Speakerphone functionality
USB Micro-B female - power & charging
Internal rechargeable 230mAh lithium-ion polymer battery
o 2 hours charging time
o Up to 12 hours playback
10m effective range
A2DP Bluetooth profile support
Specification
Bluetooth 3.0 +EDR with A2DP
Bluetooth Frequency: 2.402-2.480GHz
Supported Codecs: SBC
Audio output: 1 x 3.5mm female
Signal To Noise Ratio: 94dB
Compression ratio: 44.1 / 48KHz
Frequency Response: 100Hz ~ 22kHz
Algorithmic Delay: 40ms
THD+N: 0.03% @ 20mW/f = 1kHz
Chipset: BM81SPK02
Weight: 40 grams
Operation temperature: -10°C ~ +55°C, Storage tempe rature: -20°C ~ +60°C
Note If you want to use the BTA-30 with a Phono input on your HiFi / Speaker System, please use a 3.5mm to
Phone cable, such as LINDY No. 35490 – 7.
User Manual English
Installation
Operating via USB power (Recommended)
Connect the supplied USB Type A to Micro-B cable
to the Power & Charging port of the BTA-30 and
connect this to a free USB port on your HiFi, TV or
LINDY USB power adapter.
Operating via the internal battery
Ensure the BTA-30’s internal battery is fully charged.
2 hours charging provides a full battery &
approximately 12 hours of operation
Connect the BTA-30 to your HiFi, Headphones or speaker system with the included 3.5mm cable.
Operation
Power on the BTA-30
1. Press & hold the Power Button to turn on the BTA-30. The Bluetooth Status light with flash Blue and you
can begin the Bluetooth Pairing process.
2. Press & hold the Power Button again to turn the Receiver off.
Pairing with NFC devices
1. Start the NFC function on your device.
2. Tap your source device on the top of the LINDY BTA-30.
3. Your device may prompt you to proceed with pairing, if so select yes.
4. A connected to “LINDY BTA-30” message will appear on your source device. You can now play audio via
the BTA-30.
Pairing with Bluetooth devices
1. Activate your source device’s Bluetooth and search for available devices
2. Select the “LINDY BTA-30” and follow the onscreen prompts. If a PIN is required enter “0000” or “1234
3. Your source device will connect to the BTA-30 and you can start playing audio from your device.
Bluetooth Status
(Blue) Low Power / External
Power / Charge Indicator
(Red)
Speakerphone Mic
Power Button
Speakerphone
Pairing Button
3.5mm Audio Out
USB Micro-B
Power & Charging
NFC tag area

Produktspecifikationer

Varumärke: Lindy
Kategori: Bluetooth-mottagare
Modell: BTA-30

Behöver du hjälp?

Om du behöver hjälp med Lindy BTA-30 ställ en fråga nedan och andra användare kommer att svara dig