LOG Professional Beta Bruksanvisning

LOG Professional högtalare Beta

Läs nedan 📖 manual på svenska för LOG Professional Beta (13 sidor) i kategorin högtalare. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/13

Operating Manual

BETA

Sound & Electronics LOG GmbH | Sankt-Georgen-Gasse 7, 8020 Graz, Austria | office@logaudio.com | www.logprofessional.com

BETA

Operating Manual

Digitally Optimized, Active High-End Studio Monitor

Congratulations on your purchase of a high-quality studio monitor from LOG Professional, manufactured under strict

quality and environmental standards. In order to make optimal use of all performance features, please read these

operating instructions carefully. We advise you to keep this manual for future reference.

Content

Delivered Items 1

Installation 1

Front 2

Back 2

Connecting Audio Sources 3

LED Indicator 4

DIP-Switch-Settings 4

Live-Mode 5

Digital Room Correction 5

Auto-Sleep-Mode 5

Positioning in the Room and Sound Optimization 6

Safety Instructions 7

Repair 7

Maintenance 7

Guarantee and Warranty 7

Disposal 8

Troubleshooting 8

Symbol Denition 9

Technical Data 10

Sound & Electronics LOG GmbH | Sankt-Georgen-Gasse 7, 8020 Graz, Austria | office@logaudio.com | www.logprofessinoal.com

BETA

Operating Manual

Delivered Items

1 x BETA studio monitor

1 x Power cord

Installation

- Before unpacking, make sure that you do not touch the loudspeaker chassis when carefully removing the

loudspeaker from the packaging.

- Before placing the BETA on a stand, table or mixer, make sure it can support the speaker‘s weight (approx. 7 kg).

Also make sure that the oor is sufciently large to prevent it from tipping over. It is important to pay attention to

the center of gravity.

- As an active studio monitor, the BETA requires its own power supply. To do this, connect your BETA studio monitor

to your power outlet using the supplied power plug. The power supply unit of the BETA accepts mains voltages

between 110 V and 230 V AC and mains frequencies between 50 and 60 Hz. There is no difference in the power

output of the amplier between 110 V and 230 V mains voltage. Make sure that the speaker is only switched on

after it has been connected to the power supply.

Important note: Only connect the loudspeaker to a socket with an earth connection!

Important note: The I/O switch serves as a separation point to de-energize the device.

- Do not place the speaker in direct sunlight or near/over a radiator (or other heat source).

- Leave at least 10 cm of space around the device to ensure adequate air circulation.

- Do not place objects lled with liquids or open ame sources on the device.

- The ambient conditions for this device are +5 to +40 °C with a relative humidity of up to 80%.

Produktspecifikationer

Varumärke:	LOG Professional
Kategori:	högtalare
Modell:	Beta
Typ av operation:	Buttons, Level
Färg på produkten:	Stainless steel, White
Vikt:	2340 g
Bredd:	300 mm
Djup:	296 mm
Höjd:	195 mm
Uppvärmningsfunktion:	Ja
Förpackningens vikt:	6600 g
Förpackningens bredd:	360 mm
Djuppackning:	365 mm
Förpackningshöjd:	480 mm
Håll varm funktion:	Nee
Avfrostningsfunktion:	Ja
Husmaterial:	Roestvrijstaal
Tillgångar:	1800 W
Antal skivor:	4 snede(n)
Stopp/avbryt-knapp:	Ja
Hög huvudmekanism:	Ja
Avtagbar smulbricka:	Ja
Variabel skorpa färginställning:	Ja
Sladdförvaring:	Ja
Solningsnivåer:	6
Antal lås:	4
AC-ingångsspänning:	220 - 240 V
AC-ingångsfrekvens:	50/60 Hz