Lorus Z010 Bruksanvisning

Lorus Klockor Z010

Läs nedan 📖 manual på svenska för Lorus Z010 (2 sidor) i kategorin Klockor. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

C H A R A C T ERI S T I C S

1. Time/calendar display: Hour, minute, second,

month, date and day of the week

2. Time indication: 12-hour display format with

PM indicator and 24-hour display format are

available.

3. Stop wat ch: The st opwat ch can measure

up t o 23 hours 59 m inutes and 59 seconds

i n 1 / 1 0 0- s e c o n d i n c r e m e n t s . L a p t i m e

measurement is available. Up to 15 lap times

can be stored in memory.

Memory recall function: Data obtained in

the Stopwatch mode can be recalled after

measurement.

4. C o u ntdo wn tim er : T he cou nt d own t im e r

can be set up to 23 hours 59 minutes and 59

seconds.

5. Daily alarm: The daily alarm can be set to

sound at the designated time on a 24-hour

basis. Three individual daily alarms can be set.

Single- time alarm: The Single -t ime alarm

sounds only once at a designated time and it

is disengaged automatically.　Five individual

single-time alarms can be set.

6. Second Time Zone: Time in a different time

zone can be displayed.

7. Chime: The chime can be set to sound every

hour on the hour with a single beep.

8. Illu m i n a t i n g l i g h t : T h e bu i l t - i n e l e c t r o -

luminescent (EL) light evenly illuminates the

display for easy viewing in darkness.

B U T T O NS AND D I S P L AY S

HOW T O S ET T H E T I ME/ C ALEN D A R

H O W T O USE S T O P WAT C H

The display mode changes in the following

order by pressing Button D.

1 Press Button A for 2 seconds to change the

display to the TIME/CALENDAR SETTING mode.

(The second digits start flashing.)

2 Selection of the digits to be adjusted (flashing)

is made in the following orde r by pressing

Button D.

3 One digit (flashing) is increased or decreased

w i t h e a c h p r e s s i n g o f B u t t o n B o r C ,

respectively. To move the digits quickly, keep

the Button pressed.

• Second setting

Press Button B or C in accordance with a

time signal. The second digits are reset to

“00” and start counting immediately.

When the second digits count any number

fr om “30” to “59” and But ton B or C i s

pressed, one mi nut e is added and t he

seconds are immediately reset to “00.”

Choice of 12-Hour/24-Hour format

• T he t i me d is play for mat i n e ithe r 12-ho ur

indicat ion or in 24-hour indication can be

selected alternately by pressing button B or

C. Under the 12-hour indication format, “PM”

mark appears in the afternoon, but no AM

mark appears in the morning. Under the 24-

hour indication format, no mark appears on

the display.

* Measurement and release of lap t ime can be

repeated by pressing Button C.

* When Button C is pressed, the display changes

to show the current lap time and total time from

START for 3 seconds, and then it aut omat ically

returns to show the ongoing measurement.

* When the stopwatch is reset by pressing Button C,

the measured data is stored in memory.

Press Button D to go to the STOPWATCH mode.

The STOPWATCH mode indicator appears on the

display.

STOPWATCH OPERATION

Standard Measurement

Lap Time Measurement

BC C B C

Start Lap 1 Reset

Lap 2 Stop

BB C

Start Stop Reset

NREZ010 5-2015

CAL. Z010 23 (R SERIES)

During the measurement, the STOPWATCH signal

keeps flashing.

Press Button D to return to the TIME/CALENDAR

mode.

1. Press Button D to go to the Memory Recall

mode. The MEMORY RECALL moce indicator

appears on the display.

Memory Recall Function

2. Press Button C to show the data of the latest

measurement. T he elapsed time and the

date of measurement are displayed with a

RUN number.

3. Press Button B to read each recorded lap time.

Recorded lap time is shown in order of each

lap number.

4. Press B ut t on C t o e xit t he Memory Re call

Function. The display returns to the MEMORY

RECALL mode.

How to delete all of the memories

• Press Button A for 2 seconds. The “DELETE”

indicator appears on the display when the

watch starts deleting stored data. When the

deletion is finished, the display returns to the

MEMORY RECALL mode, and after 1 second, it

automatically goes to the STOPWATCH mode.

Data obtained in the Stopwatch mode can be

recalled after measurement. Each time data from

START to RESET is managed as a RUN. Press Button

D to return to the TIME/CALENDAR mode.

EN G A GEM ENT/D I S E NGA G E MEN T OF

C H I M E

With each press of Button C in the TIME/CALENDAR

mode, the chime can be alternately engaged

or disengage d. T he CHIME signal appe ars or

disappears on the display accordingly.

A (SET /LIGH T )

PM ind i-

c at o r

Hou r

Day of t he w ee k

Ch im e

s i gn al

St opw at c h

s i gn al

Da t e

M inu t e

Se cond

T ime r s ig na l

Al ar m

s i gn al

B (S TAR T /S T O P)

D (M O DE) C (L AP /RE SET )

4 After all the adjustments are completed, press

Butt o n A t o re turn to t he TIME/ CALEN DAR

mode.

T IM ER

T IM E/CAL E NDA R ST O PWA T CH

MEM O RY RECA LL

L O CAL CIT Y

S EC O ND S

DAT E

12 /2 4- HO U R FO R MAT

M O NT H

M IN UT E S HO U R S

L O CAL CIT Y

DATE SETTING MONTH SETTING

TIME/CALENDAR mode

12/24 FORMAT SETTING

LOCAL CITY SETTING

MINUTE SETTING

HOUR SETTING

SECOND SETTING

ST O PWA T CH mo de ind ic at or

ST O PWA T CH s ignal

L ocal c it y

M on t h Yea r

DA ILY ALA RM

SIN GL E-T IM E AL ARM

YEAR

YEAR SETTING

MEM O RY RECA LL moc e ind icat o r

After

1 second

L AP nu mbe r

Tot al t i me f r om STA RT

H O W T O USE C O U N T D O W N T I M ER

Press Button D three times to go t o the TIMER

mode. The TIMER mode indicator appears on the

display.

1. Press Button A for 2 seconds to change the

display to the TIMER SETTING mode. The hour

digits start flashing.

2. P r e s s B u t t o n B o r C t o s e t t h e s e c o n d

digits. One digit (f lashing) is incre ased or

decreased with each pressing of Button B or C,

respectively. To move the digits quickly, keep

the Button pressed.

3. Press Button D to confirm the second setting

and move on to the minute setting. The minute

digits start flashing.

4. Press Button B or C to set the minute digits.

One digit (flashing) is increased or decreased

w i t h e a c h p r e s s i n g o f B u t t o n B o r C ,

respectively. To move the digits quickly, keep

the Button pressed.

5. Press Button D to confirm the minute setting

and move on to the hour setting. T he hour

digits start flashing.

6. Press Button D to set the Timer number.

7. Press Button A to complete the timer setting.

L AP t ime

How to stop the alarm while sounding

T h e a l a r m s o u n d s f o r 1 0 s e c o n d s a t t h e

de sig n a t e d t i m e . T o s t o p i t m a nua l l y whi l e

sounding, press any Button.

Press Button D five times to go to the SINGLE-TIME

ALARM mode . T he SINGLE-T IME ALARM mode

indicator appears on the display.

1. Press Button A for 2 seconds to change the

display to the SINGLE-T IME ALARM SET T ING

mode. The minute digits start flashing.

2. Press Button B or C to set the minute digits.

One digit (flashing) is increased or decreased

with each press of Button B or C, respectively.

To move the digits quickly, keep the Button

pressed.

3. Press Button D to confirm the minute setting

and move on to the hour setting.

One digit (flashing) is increased or decreased

with each press of Button B or C, respectively.

To move the digits quickly, keep the Button

pressed.

4. Press Button D to confirm the hour setting and

move on to the year setting. The year digits

start flashing.

5. One digit (flashing) is increased or decreased

with each press of Button B or C, respectively.

To move the digits quickly, keep the Button

pressed.

6. Press Button D to confirm the year setting and

move on to the month setting. The month digits

start flashing.

7. One digit (flashing) is increased or decreased

with each press of Button B or C, respectively.

To move the digits quickly, keep the Button

pressed.

8. Press Button D to confirm the month setting

and move on to the date setting. T he date

digits start flashing.

9. One digit (flashing) is increased or decreased

with each press of Button B or C, respectively.

To move the digits quickly, keep the Button

pressed.

10. Press Button A t o complete the single time

alarm setting.

11. Press Button D to return to the TIME/CALENDAR

mode.

M IN UT E SET T I NG

HOUR S ET T I NG

DAT E SETT IN G

YEA R SET T I NG

M ONT H SET T I NG

Note: The alarm can be set only in one time zone.

Engagement/disengagement of daily alarm

With each press of Button B in the DAiLY ALARM

mode, the alarm can be alternately engaged

or disengage d. The ALARM signal appe ars or

disappears on the display accordingly.

How to stop the alarm while sounding

T h e a l a r m s o u n d s f o r 1 0 s e c o n d s a t t h e

de sig n a t e d t i m e . T o s t o p i t m a nua l l y whi l e

sounding, press any Button.

Engagement/disengagement of single-time

alarm

Wit h each press of Button B in the SINGLE-T IM

AL ARM m ode, t he alarm ca n b e alt ernatel y

e ng aged o r di sen gag e d. T he ALA RM s ig nal

appears or disappears on the display accordingly.

T he miniature battery CR2032 which powers

your watch should last approximately 4 years.

However, because it is inserted at the factory,

t he act ua l life o f t he b at t e ry o nc e i n y our

possession may be less than 4 years.

Be sure to replace the battery to prevent any

possible malfunction as soon as it runs down. To

replace the battery we recommend taking the

watch to a local watch repair shop.

Note: If t h e a la r m is used for mor e t han 20

seconds a day and/or t he illuminat ing

light for more than 8 seconds a day, the

battery life may be less than the specified

period.

B AT T E R Y C H A N G E

H O W T O S ET S E C O N D T I M E Z O N E

Press Button D six times to go to the SECOND TIME

ZONE mode.

1. Press Button C to select the city code.

2. If the daylight saving time is effective in the

se lec t ed cit y , pre ss But t o n B t o s ho w t h e

daylight saving time. The daylight saving time

(“ DST”) mark will appear.

Press Button D to return to the TIME/CALENDAR

mode.

H O W T O U S E E L B A C K L I G H T

In any mode press Button A to illuminate the

display for about 4 seconds.

Note:

1. T he b ac kl ig ht of t h e w at c h e mploy s a n

electro-luminescent (EL) light, which tends to

lose illuminating power after very long use.

2. The illumination provided by backlight may

be hard to see when viewed under direct

sunlight.

L ocal c it y

C A R E O F Y O U R L O R U S WAT C H

T h i s w a t c h c o n t a i n s p r e c i s e e l e c t r o n i c

components. Never attempt to open the case

or remove the back cover.

• BATTERY

CAUTION

Do not expose the old battery to ﬁre

or recharge it. Keep it at a place be-

yond the reach of chil dren. If a child

swallows it, consult a doctor immedi-

ately.

• WATER RESISTANT

Co nd i t i on

of u se Ac ci d e n ta l

co n t a ct

wi th wa te r,

s u c h as

s p l as h e s

a nd r ai n

Swi m m i ng

a nd t a k in g

a s h o w er

Ski n d i v-

i n g

Sc ub a

d i v i n g

Indication

on the dial/

case back

I nd i c at i on

* I f yo ur w a tc h is 200 M /20 B AR , 100 M/10

BAR or 50 M/5 BAR water resistant, it is so

indicated on the dial/case back.

• Do not operate the buttons when the watch is

wet.

• If the watch is exposed to salt water, rinse it

in fresh water and then wipe it thoroughly

dry.

• Should you find any water or condensation

i nside t he wat c h , i m m e d i a t e l y h a v e it

checked. Water can corrode electric parts

inside the case.

NO NO NO

YE S YE S NO NO

YE S YE S N O

NO NO NO

YE S

WAT E R RE -

SI S TA NT

WAT E R RE -

SI S TA NT

(5 0 M/ 5 BA R

)

WAT E R RE -

SI S TA NT

100M /1 0 BAR

or a b o v e

(

Caution:

Leather straps are not water resistant except

so indicated, even if the watch head is water

resistant.

• ALLERGIC REACTION

Because the case and band touch the skin

directly, it is important to clean them regularly. If

not, shirt sleeves may be stained and those with

delicate skin may develop a rash. Please wear

the watch with some play to avoid any possible

allergic reaction. If you develop a rash on your

wrist, stop wearing and consult a physician.

• MAGNETISM

Your watch will be adversely affected by strong

magnetism.Keep it away from close contact

with magnetic objects.

• SHOCKS AND VIBRATIONS

Your watch may be worn fo r norma l sports

activities, but be careful not to drop it or hit it on

hard surfaces.

• TEMPERATURE

Your watch is pre adjust ed so that constant

accuracy may be insured at normal tem pera-

ture.

• CLEANING

U se onl y a so f t clo t h a nd c l e an wat e r f o r

cleaning your watch. Never use chemicals, as

the waterproof gasket will corrode.

S E R V I C E

Wh en your L ORUS watch re quires re pa ir or

servicing, please see the enclosed WARRANTY/

GUARANTEE. P r i n t e d i n C h i n a

City code

H11

HNL

ANC

LAX

DEN

CHI

NYC

SDQ

RIO

H02

H01

GMT

LON

PAR

CAI

JED

DXB

KHI

DAC

BKK

HKG

TYO

SYD

NOU

WLG

-11

-10

-9

-8

-7

-6

-5

-4

-3

-2

-1

Time

differences

City

Pago Pago

Honolulu, Patete

Anchorage, Nome

Los Angeles, San Francisco,

Las Vegas, Vancouver, Seattle

Denver, Edmonton

Chicago, Mexico City, Houston,

New Orleans, Winnipeg

New York, Washington, D.C.,

Montreal, Lima, Havana, Boston

Santo Domingo(*)

Rio de Janeiro, Buenos Aires,

Brasilia, Montevideo, São Paulo

Praia

London, Dublin, Reykjavik,

Casablanca, Lisbon

Paris,

Vienna, Brussels, Berlin,

Madrid, Rome, Milan, Algiers,

Hamburg, Frankfurt, Stockholm

Cairo, Athens, Helsinki,

Istanbul, Beirut, Damascus

Jeddah, Baghdad, Nairobi,

Kuwait, Riyadh, Moscow

Dubai, Abu Dhabi,

Muscat

Karachi, Male

Dacca, Colombo

Bangkok, Hanoi, Jakarta,

Phnom Penh, Vientiane

Hong Kong, Beijing, Singapore,

Manila, Taipei, Kuala Lumpur, Perth

Tokyo, Seoul, Pyongyang

Sydney, Guam, Melbourne, Rabaul

Nouméa, Port Villa

Wellington, Auckland,

Christchurch, Nauru Island

Se cond t i me z one

L ocal t i me

T ime and

d at e of

Se cond t i me

z o ne

Note: The alarm can be set only in one time zone.

M IN UT E SET T I NG

ALARM NUM BER SET T I NG

H O W T O U S E S I N G L E -T I M E A L A R M

HOUR S ET T I NG

H O W T O U S E D A I LY A L A R M

Press But ton D four times to go to the ALARM

mode. The DAILY ALARM mode indicator appears

on the display.

1. Press Button A for 2 seconds to change the

display to the DAILY ALARM SETTING mode. The

hour digits start flashing.

2. One digit (flashing) is increased or decreased

with each press of Button B or C, respectively.

To move the digits quickly, keep the Button

pressed.

3. Press Button D to confir m the hour setting and

move on to the minute setting. The minute

digits start flashing.

4. Press Button B or C to set the minute digits.

One digit (flashing) is increased or decreased

with each press of Button B or C, respectively.

To move the digits quickly, keep the Button

pressed.

5. Press Button D to confirm the minute setting

and move on to the alarm number setting. The

alarm number starts flashing.

6. Press Button B or C to select the alarm number.

7. Press Button A to complete the alarm setting.

TIMER OPERATION

1. Press Button B in the TIMER mode to start the

countdown timer.

2. Press Button B to stop the countdown timer.

3. To reset the timer, press Button C.

Press Button D to return to the TIME/CALENDAR

mode.

BBC

Start Stop Reset

T IM ER numb er

M IN UT E SET T I NG

HOUR S ET T I NG

SEC OND S ET T I NG

T I MER N UM BER S ET T I NG

YE S

(*) The display shows “CCS” (Santiago), but

currently Santiago is UTC-3.

Produktspecifikationer

Varumärke:	Lorus
Kategori:	Klockor
Modell:	Z010
Färg på produkten:	Zwart
Vikt:	30 g
Bredd:	94.3 mm
Djup:	32.3 mm
Höjd:	12.5 mm
Förpackningens vikt:	100 g
Mobila operativsystem som stöds:	iOS
LED-indikatorer:	Ja
Processormodel:	Action Micro AM8251
Wi-Fi-standarder:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Vormfaktor:	Dongle
USB uttag:	Ja
USB-kontakttyp:	USB Type-B
Strömutgång (volt):	+5V
Strömutgång (ampere):	1 A
Certifiering:	FCC-B, CE, ErP
Full HD:	Ja
Hållbarhetscertifikat:	RoHS
Miracast:	Ja
Digital Living Network Alliance (DLNA) certifierad:	Ja
Typ av mat:	USB
Förbindelse:	HDMI
AirPlay:	Ja
Utgångsgränssnitt:	Wi-Fi